Kconfig

	depends on PCI
	---help---
	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
	  adapter. The driver allows for using the Jumbo Frame option (9000
	  bytes/frame) however it requires that your switches can handle this
	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
	  line.

	  To compile this driver as a module, choose M here: the
	  module will be called acenic.

config ACENIC_OMIT_TIGON_I
	bool "Omit support for old Tigon I based AceNICs"
	depends on ACENIC
	help
	  Say Y here if you only have Tigon II based AceNICs and want to leave
	  out support for the older Tigon I based cards which are no longer
	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
	  version)).  This will reduce the size of the driver object by
	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
	  Tigon II, say N here.

	  The safe and default value for this is N.

config DL2K
	tristate "DL2000/TC902x-based Gigabit Ethernet support"
	depends on PCI
	select CRC32
	help
	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
	  which includes
	  D-Link DGE-550T Gigabit Ethernet Adapter.
	  D-Link DL2000-based Gigabit Ethernet Adapter.
	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.

	  To compile this driver as a module, choose M here: the
	  module will be called dl2k.

config E1000
	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go 
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module
	  will be called e1000.

config E1000_NAPI
	bool "Use Rx Polling (NAPI)"
	depends on E1000
	help
	  NAPI is a new driver API designed to reduce CPU and interrupt load
	  when the driver is receiving lots of packets from the card. It is
	  still somewhat experimental and thus not yet enabled by default.

	  If your estimated Rx load is 10kpps or more, or if the card will be
	  deployed on potentially unfriendly networks (e.g. in a firewall),
	  then say Y here.

	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
	  information.

	  If in doubt, say N.

config E1000_DISABLE_PACKET_SPLIT
	bool "Disable Packet Split for PCI express adapters"
	depends on E1000
	help
	  Say Y here if you want to use the legacy receive path for PCI express
	  hardware.

	  If in doubt, say N.

config E1000E
	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
	depends on PCI
	---help---
	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
	  use the regular e1000 driver For more information on how to
	  identify your adapter, go to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000e.txt>.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module
	  will be called e1000e.

source "drivers/net/ixp2000/Kconfig"

config MYRI_SBUS
	tristate "MyriCOM Gigabit Ethernet support"
	depends on SBUS
	help
	  This driver supports MyriCOM Sbus gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called myri_sbus.  This is recommended.

config NS83820
	tristate "National Semiconductor DP83820 support"
	depends on PCI
	help
	  This is a driver for the National Semiconductor DP83820 series
	  of gigabit ethernet MACs.  Cards using this chipset include
	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
	  zero copy.

config HAMACHI
	tristate "Packet Engines Hamachi GNIC-II support"
	depends on PCI
	select MII
	help
	  If you have a Gigabit Ethernet card of this type, say Y and read
	  the Ethernet-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module will be
	  called hamachi.

config YELLOWFIN
	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
	depends on PCI && EXPERIMENTAL
	select CRC32
	---help---
	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
	  used by the Beowulf Linux cluster project.  See
	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
	  information about this driver in particular and Beowulf in general.

	  To compile this driver as a module, choose M here: the module
	  will be called yellowfin.  This is recommended.

config R8169
	tristate "Realtek 8169 gigabit ethernet support"
	depends on PCI
	select CRC32
	---help---
	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.

	  To compile this driver as a module, choose M here: the module
	  will be called r8169.  This is recommended.

config R8169_NAPI
	bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
	depends on R8169 && EXPERIMENTAL
	help
	  NAPI is a new driver API designed to reduce CPU and interrupt load
	  when the driver is receiving lots of packets from the card. It is
	  still somewhat experimental and thus not yet enabled by default.

	  If your estimated Rx load is 10kpps or more, or if the card will be
	  deployed on potentially unfriendly networks (e.g. in a firewall),
	  then say Y here.

	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
	  information.

	  If in doubt, say N.

config R8169_VLAN
	bool "VLAN support"
	depends on R8169 && VLAN_8021Q
	---help---
	  Say Y here for the r8169 driver to support the functions required
	  by the kernel 802.1Q code.
	  
	  If in doubt, say Y.

config SIS190
	tristate "SiS190/SiS191 gigabit ethernet support"
	depends on PCI
	select CRC32
	select MII
	---help---
	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
	  appear in lan on motherboard designs which are based on SiS 965
	  and SiS 966 south bridge.

	  To compile this driver as a module, choose M here: the module
	  will be called sis190.  This is recommended.

config SKGE
	tristate "New SysKonnect GigaEthernet support"
	depends on PCI
	select CRC32
	---help---
	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
	  and related Gigabit Ethernet adapters. It is a new smaller driver
	  with better performance and more complete ethtool support.

	  It does not support the link failover and network management 
	  features that "portable" vendor supplied sk98lin driver does.

	  This driver supports adapters based on the original Yukon chipset:
	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.

	  It does not support the newer Yukon2 chipset: a separate driver,
	  sky2, is provided for Yukon2-based adapters.

	  To compile this driver as a module, choose M here: the module
	  will be called skge.  This is recommended.

config SKY2
	tristate "SysKonnect Yukon2 support"
	depends on PCI
	select CRC32
	---help---
	  This driver supports Gigabit Ethernet adapters based on the
	  Marvell Yukon 2 chipset:
	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21

	  There is companion driver for the older Marvell Yukon and
	  Genesis based adapters: skge.

	  To compile this driver as a module, choose M here: the module
	  will be called sky2.  This is recommended.

config SKY2_DEBUG
       bool "Debugging interface"
       depends on SKY2 && DEBUG_FS
       help
	 This option adds the ability to dump driver state for debugging.
	 The file debugfs/sky2/ethX displays the state of the internal
	 transmit and receive rings.

	 If unsure, say N.

config SK98LIN
	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
	depends on PCI
	---help---
	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
	  compliant Gigabit Ethernet Adapter.

	  This driver supports the original Yukon chipset. This driver is
	  deprecated and will be removed from the kernel in the near future,
	  it has been replaced by the skge driver. skge is cleaner and
	  seems to work better.

	  This driver does not support the newer Yukon2 chipset. A separate
	  driver, sky2, is provided to support Yukon2-based adapters.

	  The following adapters are supported by this driver:
	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
	    - EG1032 v2 Instant Gigabit Network Adapter
	    - EG1064 v2 Instant Gigabit Network Adapter
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
	    - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
	    - Marvell RDK-8001 Adapter
	    - Marvell RDK-8002 Adapter
	    - Marvell RDK-8003 Adapter
	    - Marvell RDK-8004 Adapter
	    - Marvell RDK-8006 Adapter
	    - Marvell RDK-8007 Adapter
	    - Marvell RDK-8008 Adapter
	    - Marvell RDK-8009 Adapter
	    - Marvell RDK-8010 Adapter
	    - Marvell RDK-8011 Adapter
	    - Marvell RDK-8012 Adapter
	    - Marvell RDK-8052 Adapter
	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
	    - SK-9521 10/100/1000Base-T Adapter
	    - SK-9521 V2.0 10/100/1000Base-T Adapter
	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
	    - SMC EZ Card 1000 (SMC9452TXV.2)
	  
	  The adapters support Jumbo Frames.
	  The dual link adapters support link-failover and dual port features.
	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
	  the scatter-gather functionality with sendfile(). Please refer to 
	  <file:Documentation/networking/sk98lin.txt> for more information about
	  optional driver parameters.
	  Questions concerning this driver may be addressed to:
	      <linux@syskonnect.de>
	  
	  If you want to compile this driver as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want),
	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
	  be called sk98lin. This is recommended.

config VIA_VELOCITY
	tristate "VIA Velocity support"
	depends on PCI
	select CRC32
	select CRC_CCITT
	select MII
	help
	  If you have a VIA "Velocity" based network card say Y here.

	  To compile this driver as a module, choose M here. The module
	  will be called via-velocity.

config TIGON3
	tristate "Broadcom Tigon3 support"
	depends on PCI
	help
	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called tg3.  This is recommended.

config BNX2
	tristate "Broadcom NetXtremeII support"
	depends on PCI
	select CRC32
	select ZLIB_INFLATE
	help
	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called bnx2.  This is recommended.

config SPIDER_NET
	tristate "Spider Gigabit Ethernet driver"
	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
	select FW_LOADER
	help
	  This driver supports the Gigabit Ethernet chips present on the
	  Cell Processor-Based Blades from IBM.

config TSI108_ETH
	   tristate "Tundra TSI108 gigabit Ethernet support"
	   depends on TSI108_BRIDGE
	   help
	     This driver supports Tundra TSI108 gigabit Ethernet ports.
	     To compile this driver as a module, choose M here: the module
	     will be called tsi108_eth.

config GELIC_NET
	tristate "PS3 Gigabit Ethernet driver"
	depends on PPC_PS3
	help
	  This driver supports the network device on the PS3 game
	  console.  This driver has built-in support for Ethernet.

	  To compile this driver as a module, choose M here: the
	  module will be called ps3_gelic.

config GIANFAR
	tristate "Gianfar Ethernet"
	depends on 85xx || 83xx || PPC_86xx
	select PHYLIB
	select CRC32
	help
	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
	  and MPC86xx family of chips, and the FEC on the 8540.

config GFAR_NAPI
	bool "NAPI Support"
	depends on GIANFAR

config UCC_GETH
	tristate "Freescale QE Gigabit Ethernet"
	depends on QUICC_ENGINE
	select PHYLIB
	help
	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
	  which is available on some Freescale SOCs.

config UGETH_NAPI
	bool "NAPI Support"
	depends on UCC_GETH

config UGETH_MAGIC_PACKET
	bool "Magic Packet detection support"
	depends on UCC_GETH

config UGETH_FILTERING
	bool "Mac address filtering support"
	depends on UCC_GETH

config UGETH_TX_ON_DEMAND
	bool "Transmit on Demand support"
	depends on UCC_GETH

config MV643XX_ETH
	tristate "MV-643XX Ethernet support"
	depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32)
	select MII
	help
	  This driver supports the gigabit Ethernet on the Marvell MV643XX
	  chipset which is used in the Momenco Ocelot C and Jaguar ATX and
	  Pegasos II, amongst other PPC and MIPS boards.

config QLA3XXX
	tristate "QLogic QLA3XXX Network Driver Support"
	depends on PCI
	help
	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called qla3xxx.

config ATL1
	tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
	depends on PCI && EXPERIMENTAL
	select CRC32
	select MII
	help
	  This driver supports the Attansic L1 gigabit ethernet adapter.

	  To compile this driver as a module, choose M here.  The module
	  will be called atl1.

endif # NETDEV_1000

#
#	10 Gigabit Ethernet
#

menuconfig NETDEV_10000
	bool "Ethernet (10000 Mbit)"
	depends on !UML
	default y
	---help---
	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
	  This option alone does not add any kernel code.

	  If you say N, all options in this submenu will be skipped and disabled.

if NETDEV_10000

config CHELSIO_T1
        tristate "Chelsio 10Gb Ethernet support"
        depends on PCI
	select CRC32
        help
          This driver supports Chelsio gigabit and 10-gigabit
          Ethernet cards. More information about adapter features and
	  performance tuning is in <file:Documentation/networking/cxgb.txt>.

          For general information about Chelsio and our products, visit
          our website at <http://www.chelsio.com>.

          For customer support, please visit our customer support page at
          <http://www.chelsio.com/support.htm>.

          Please send feedback to <linux-bugs@chelsio.com>.

          To compile this driver as a module, choose M here: the module
          will be called cxgb.

config CHELSIO_T1_1G
        bool "Chelsio gigabit Ethernet support"
        depends on CHELSIO_T1
        help
          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
          are using only 10G cards say 'N' here.

config CHELSIO_T1_NAPI
	bool "Use Rx Polling (NAPI)"
	depends on CHELSIO_T1
	default y
	help
	  NAPI is a driver API designed to reduce CPU and interrupt load
	  when the driver is receiving lots of packets from the card.

config CHELSIO_T3
	tristate "Chelsio Communications T3 10Gb Ethernet support"
	depends on PCI
	select FW_LOADER
	help
	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
	  adapters.

	  For general information about Chelsio and our products, visit
	  our website at <http://www.chelsio.com>.

	  For customer support, please visit our customer support page at
	  <http://www.chelsio.com/support.htm>.

	  Please send feedback to <linux-bugs@chelsio.com>.

	  To compile this driver as a module, choose M here: the module
	  will be called cxgb3.

config EHEA
	tristate "eHEA Ethernet support"
	depends on IBMEBUS
	select INET_LRO
	---help---
	  This driver supports the IBM pSeries eHEA ethernet adapter.

	  To compile the driver as a module, choose M here. The module
	  will be called ehea.

config IXGBE
	tristate "Intel(R) 10GbE PCI Express adapters support"
	depends on PCI
	---help---
	  This driver supports Intel(R) 10GbE PCI Express family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/ixgbe.txt>.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module
	  will be called ixgbe.

config IXGB
	tristate "Intel(R) PRO/10GbE support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/10GbE family of adapters for
	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
	  instead. For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/ixgb.txt>.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module
	  will be called ixgb.

config IXGB_NAPI
	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
	depends on IXGB && EXPERIMENTAL
	help
	  NAPI is a new driver API designed to reduce CPU and interrupt load
	  when the driver is receiving lots of packets from the card. It is
	  still somewhat experimental and thus not yet enabled by default.

	  If your estimated Rx load is 10kpps or more, or if the card will be
	  deployed on potentially unfriendly networks (e.g. in a firewall),
	  then say Y here.

	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
	  information.

	  If in doubt, say N.

config S2IO
	tristate "S2IO 10Gbe XFrame NIC"
	depends on PCI
	---help---
	  This driver supports the 10Gbe XFrame NIC of S2IO. 
	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/s2io.txt>.

config S2IO_NAPI
	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
	depends on S2IO && EXPERIMENTAL
	help
	  NAPI is a new driver API designed to reduce CPU and interrupt load
	  when the driver is receiving lots of packets from the card. It is
	  still somewhat experimental and thus not yet enabled by default.

	  If your estimated Rx load is 10kpps or more, or if the card will be
	  deployed on potentially unfriendly networks (e.g. in a firewall),
	  then say Y here.

	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
	  information.

	  If in doubt, say N.

config MYRI10GE
	tristate "Myricom Myri-10G Ethernet support"
	depends on PCI
	select FW_LOADER
	select CRC32
	select INET_LRO
	---help---
	  This driver supports Myricom Myri-10G Dual Protocol interface in
	  Ethernet mode. If the eeprom on your board is not recent enough,
	  you will need a newer firmware image.
	  You may get this image or more information, at:

	  <http://www.myri.com/scs/download-Myri10GE.html>

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module
	  will be called myri10ge.

config NETXEN_NIC
	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
	depends on PCI
	help
	  This enables the support for NetXen's Gigabit Ethernet card.

config PASEMI_MAC
	tristate "PA Semi 1/10Gbit MAC"
	depends on PPC64 && PCI
	select PHYLIB
	help
	  This driver supports the on-chip 1/10Gbit Ethernet controller on
	  PA Semi's PWRficient line of chips.

config MLX4_CORE
	tristate
	depends on PCI
	default n

config MLX4_DEBUG
	bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
	depends on MLX4_CORE
	default y
	---help---
	  This option causes debugging code to be compiled into the
	  mlx4_core driver.  The output can be turned on via the
	  debug_level module parameter (which can also be set after
	  the driver is loaded through sysfs).

config TEHUTI
	tristate "Tehuti Networks 10G Ethernet"
	depends on PCI
	help
	  Tehuti Networks 10G Ethernet NIC

endif # NETDEV_10000

source "drivers/net/tokenring/Kconfig"

source "drivers/net/wireless/Kconfig"

source "drivers/net/usb/Kconfig"

source "drivers/net/pcmcia/Kconfig"

source "drivers/net/wan/Kconfig"

source "drivers/atm/Kconfig"

source "drivers/s390/net/Kconfig"

config XEN_NETDEV_FRONTEND
	tristate "Xen network device frontend driver"
	depends on XEN
	default y
	help
	  The network device frontend driver allows the kernel to
	  access network devices exported exported by a virtual
	  machine containing a physical network device driver. The
	  frontend driver is intended for unprivileged guest domains;
	  if you are compiling a kernel for a Xen guest, you almost
	  certainly want to enable this.

config ISERIES_VETH
	tristate "iSeries Virtual Ethernet driver support"
	depends on PPC_ISERIES

config RIONET
	tristate "RapidIO Ethernet over messaging driver support"
	depends on RAPIDIO

config RIONET_TX_SIZE
	int "Number of outbound queue entries"
	depends on RIONET
	default "128"

config RIONET_RX_SIZE
	int "Number of inbound queue entries"
	depends on RIONET
	default "128"

config FDDI
	bool "FDDI driver support"
	depends on (PCI || EISA || TC)
	help
	  Fiber Distributed Data Interface is a high speed local area network
	  design; essentially a replacement for high speed Ethernet. FDDI can
	  run over copper or fiber. If you are connected to such a network and
	  want a driver for the FDDI card in your computer, say Y here (and
	  then also Y to the driver for your FDDI card, below). Most people
	  will say N.

config DEFXX
	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
	depends on FDDI && (PCI || EISA || TC)
	---help---
	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
	  to a local FDDI network.

	  To compile this driver as a module, choose M here: the module
	  will be called defxx.  If unsure, say N.

config DEFXX_MMIO
	bool
	prompt "Use MMIO instead of PIO" if PCI || EISA
	depends on DEFXX
	default n if PCI || EISA
	default y
	---help---
	  This instructs the driver to use EISA or PCI memory-mapped I/O
	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
	  Enabling this gives an improvement in processing time in parts
	  of the driver, but it may cause problems with EISA (DEFEA)
	  adapters.  TURBOchannel does not have the concept of I/O ports,
	  so MMIO is always used for these (DEFTA) adapters.

	  If unsure, say N.

config SKFP
	tristate "SysKonnect FDDI PCI support"
	depends on FDDI && PCI
	select BITREVERSE
	---help---
	  Say Y here if you have a SysKonnect FDDI PCI adapter.
	  The following adapters are supported by this driver:
	  - SK-5521 (SK-NET FDDI-UP)
	  - SK-5522 (SK-NET FDDI-UP DAS)
	  - SK-5541 (SK-NET FDDI-FP)
	  - SK-5543 (SK-NET FDDI-LP)
	  - SK-5544 (SK-NET FDDI-LP DAS)
	  - SK-5821 (SK-NET FDDI-UP64)
	  - SK-5822 (SK-NET FDDI-UP64 DAS)
	  - SK-5841 (SK-NET FDDI-FP64)
	  - SK-5843 (SK-NET FDDI-LP64)
	  - SK-5844 (SK-NET FDDI-LP64 DAS)
	  - Netelligent 100 FDDI DAS Fibre SC
	  - Netelligent 100 FDDI SAS Fibre SC
	  - Netelligent 100 FDDI DAS UTP
	  - Netelligent 100 FDDI SAS UTP
	  - Netelligent 100 FDDI SAS Fibre MIC

	  Read <file:Documentation/networking/skfp.txt> for information about
	  the driver.

	  Questions concerning this driver can be addressed to:
	  <linux@syskonnect.de>

	  To compile this driver as a module, choose M here: the module
	  will be called skfp.  This is recommended.

config HIPPI
	bool "HIPPI driver support (EXPERIMENTAL)"
	depends on EXPERIMENTAL && INET && PCI
	help
	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
	  single-mode). HIPPI networks are commonly used for clusters and to
	  connect to super computers. If you are connected to a HIPPI network
	  and have a HIPPI network card in your computer that you want to use
	  under Linux, say Y here (you must also remember to enable the driver
	  for your HIPPI card below). Most people will say N here.

config ROADRUNNER
	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
	depends on HIPPI && PCI
	help
	  Say Y here if this is your PCI HIPPI network card.

	  To compile this driver as a module, choose M here: the module
	  will be called rrunner.  If unsure, say N.

config ROADRUNNER_LARGE_RINGS
	bool "Use large TX/RX rings (EXPERIMENTAL)"
	depends on ROADRUNNER
	help
	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
	  of additional memory to allow for fastest operation, both for
	  transmitting and receiving. This memory cannot be used by any other
	  kernel code or by user space programs. Say Y here only if you have
	  the memory.

config PLIP
	tristate "PLIP (parallel port) support"
	depends on PARPORT
	---help---
	  PLIP (Parallel Line Internet Protocol) is used to create a
	  reasonably fast mini network consisting of two (or, rarely, more)
	  local machines.  A PLIP link from a Linux box is a popular means to
	  install a Linux distribution on a machine which doesn't have a
	  CD-ROM drive (a minimal system has to be transferred with floppies
	  first). The kernels on both machines need to have this PLIP option
	  enabled for this to work.

	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
	  ports (the connectors at the computers with 25 holes) are connected
	  with "null printer" or "Turbo Laplink" cables which can transmit 4
	  bits at a time (mode 0) or with special PLIP cables, to be used on
	  bidirectional parallel ports only, which can transmit 8 bits at a
	  time (mode 1); you can find the wiring of these cables in
	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
	  and winsock or NCSA's telnet.

	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
	  as the NET-3-HOWTO, both available from
	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
	  protocol has been changed and this PLIP driver won't work together
	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
	  your kernel by about 8 KB.

	  To compile this driver as a module, choose M here and read
	  <file:Documentation/networking/net-modules.txt>.  The module will be
	  called plip.  If unsure, say Y or M, in case you buy a laptop
	  later.

config PPP
	tristate "PPP (point-to-point protocol) support"
	select SLHC
	---help---
	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
	  the same purpose: sending Internet traffic over telephone (and other
	  serial) lines.  Ask your access provider if they support it, because
	  otherwise you can't use it; most Internet access providers these
	  days support PPP rather than SLIP.

	  To use PPP, you need an additional program called pppd as described
	  in the PPP-HOWTO, available at
	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
	  the version of pppd recommended in <file:Documentation/Changes>.
	  The PPP option enlarges your kernel by about 16 KB.

	  There are actually two versions of PPP: the traditional PPP for
	  asynchronous lines, such as regular analog phone lines, and
	  synchronous PPP which can be used over digital ISDN lines for
	  example.  If you want to use PPP over phone lines or other
	  asynchronous serial lines, you need to say Y (or M) here and also to
	  the next option, "PPP support for async serial ports".  For PPP over
	  synchronous lines, you should say Y (or M) here and to "Support
	  synchronous PPP", below.

	  If you said Y to "Version information on all symbols" above, then
	  you cannot compile the PPP driver into the kernel; you can then only
	  compile it as a module. To compile this driver as a module, choose M
	  here and read <file:Documentation/networking/net-modules.txt>.
	  The module will be called ppp_generic.

config PPP_MULTILINK
	bool "PPP multilink support (EXPERIMENTAL)"
	depends on PPP && EXPERIMENTAL
	help
	  PPP multilink is a protocol (defined in RFC 1990) which allows you
	  to combine several (logical or physical) lines into one logical PPP
	  connection, so that you can utilize your full bandwidth.

	  This has to be supported at the other end as well and you need a
	  version of the pppd daemon which understands the multilink protocol.

	  If unsure, say N.

config PPP_FILTER
	bool "PPP filtering"
	depends on PPP
	help
	  Say Y here if you want to be able to filter the packets passing over
	  PPP interfaces.  This allows you to control which packets count as
	  activity (i.e. which packets will reset the idle timer or bring up
	  a demand-dialed link) and which packets are to be dropped entirely.
	  You need to say Y here if you wish to use the pass-filter and
	  active-filter options to pppd.

	  If unsure, say N.

config PPP_ASYNC
	tristate "PPP support for async serial ports"
	depends on PPP
	select CRC_CCITT
	---help---
	  Say Y (or M) here if you want to be able to use PPP over standard
	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
	  need this option.

	  To compile this driver as a module, choose M here.

	  If unsure, say Y.

config PPP_SYNC_TTY
	tristate "PPP support for sync tty ports"
	depends on PPP
	help
	  Say Y (or M) here if you want to be able to use PPP over synchronous
	  (HDLC) tty devices, such as the SyncLink adapter. These devices
	  are often used for high-speed leased lines like T1/E1.

	  To compile this driver as a module, choose M here.

config PPP_DEFLATE
	tristate "PPP Deflate compression"
	depends on PPP
	select ZLIB_INFLATE
	select ZLIB_DEFLATE
	---help---
	  Support for the Deflate compression method for PPP, which uses the
	  Deflate algorithm (the same algorithm that gzip uses) to compress
	  each PPP packet before it is sent over the wire.  The machine at the
	  other end of the PPP link (usually your ISP) has to support the
	  Deflate compression method as well for this to be useful.  Even if
	  they don't support it, it is safe to say Y here.

	  To compile this driver as a module, choose M here.

config PPP_BSDCOMP
	tristate "PPP BSD-Compress compression"
	depends on PPP
	---help---
	  Support for the BSD-Compress compression method for PPP, which uses
	  the LZW compression method to compress each PPP packet before it is
	  sent over the wire. The machine at the other end of the PPP link
	  (usually your ISP) has to support the BSD-Compress compression
	  method as well for this to be useful. Even if they don't support it,
	  it is safe to say Y here.

	  The PPP Deflate compression method ("PPP Deflate compression",
	  above) is preferable to BSD-Compress, because it compresses better
	  and is patent-free.

	  Note that the BSD compression code will always be compiled as a
	  module; it is called bsd_comp and will show up in the directory
	  modules once you have said "make modules". If unsure, say N.

config PPP_MPPE
       tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
       depends on PPP && EXPERIMENTAL
       select CRYPTO
       select CRYPTO_SHA1
       select CRYPTO_ARC4
       select CRYPTO_ECB
       ---help---
         Support for the MPPE Encryption protocol, as employed by the
	 Microsoft Point-to-Point Tunneling Protocol.

	 See http://pptpclient.sourceforge.net/ for information on