Commit 47c51431 authored by Jon Mason's avatar Jon Mason Committed by John W. Linville
Browse files

[PATCH] trivial: fix spelling errors in Kconfigs



This patch corrects a few spelling and grammar errors found in
drivers/net
Signed-off-by: default avatarJon Mason <jdmason@us.ibm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 23afaec4
......@@ -66,7 +66,7 @@ config BONDING
'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
The driver supports multiple bonding modes to allow for both high
perfomance and high availability operation.
performance and high availability operation.
Refer to <file:Documentation/networking/bonding.txt> for more
information.
......@@ -698,8 +698,8 @@ config VORTEX
depends on NET_VENDOR_3COM && (PCI || EISA)
select MII
---help---
This option enables driver support for a large number of 10mbps and
10/100mbps EISA, PCI and PCMCIA 3Com network cards:
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
......@@ -1021,7 +1021,7 @@ config EEXPRESS_PRO
depends on NET_ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
driver supports intel i82595{FX,TX} based boards. Note however
driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
......@@ -1207,7 +1207,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
help
Additional receive skb headroom. Note, that driver
will always reserve at least 2 bytes to make IP header
aligned, so usualy there is no need to add any additional
aligned, so usually there is no need to add any additional
headroom.
If unsure, set to 0.
......@@ -1933,7 +1933,7 @@ config MYRI_SBUS
will be called myri_sbus. This is recommended.
config NS83820
tristate "National Semiconduct DP83820 support"
tristate "National Semiconductor DP83820 support"
depends on PCI
help
This is a driver for the National Semiconductor DP83820 series
......@@ -2514,7 +2514,7 @@ config PPP_FILTER
Say Y here if you want to be able to filter the packets passing over
PPP interfaces. This allows you to control which packets count as
activity (i.e. which packets will reset the idle timer or bring up
a demand-dialled link) and which packets are to be dropped entirely.
a demand-dialed link) and which packets are to be dropped entirely.
You need to say Y here if you wish to use the pass-filter and
active-filter options to pppd.
......@@ -2702,8 +2702,8 @@ config SHAPER
<file:Documentation/networking/shaper.txt> for more information.
An alternative to this traffic shaper is the experimental
Class-Based Queueing (CBQ) scheduling support which you get if you
say Y to "QoS and/or fair queueing" above.
Class-Based Queuing (CBQ) scheduling support which you get if you
say Y to "QoS and/or fair queuing" above.
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
......
......@@ -68,10 +68,10 @@ config ARCNET_CAP
packet is stuffed with an extra 4 byte "cookie" which doesn't
actually appear on the network. After transmit the driver will send
back a packet with protocol byte 0 containing the status of the
transmition:
transmission:
0=no hardware acknowledge
1=excessive nak
2=transmition accepted by the reciever hardware
2=transmission accepted by the receiver hardware
Received packets are also stuffed with the extra 4 bytes but it will
be random data.
......
......@@ -283,7 +283,7 @@ config USB_IRDA
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
dongles available and most of their pecularities. Those dongles
dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
......@@ -360,7 +360,7 @@ config ALI_FIR
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
......
......@@ -459,7 +459,7 @@ config WANPIPE_FR
bool "WANPIPE Frame Relay support"
depends on VENDOR_SANGOMA
help
Connect a WANPIPE card to a Frame Relay network, or use Frame Felay
Connect a WANPIPE card to a Frame Relay network, or use Frame Relay
API to develop custom applications.
Contains the Ethernet Bridging over Frame Relay feature, where
......
......@@ -204,7 +204,7 @@ config IPW2200
In order to use this driver, you will need a firmware image for it.
You can obtain the firmware from
<http://ipw2200.sf.net/>. See the above referenced README.ipw2200
for information on where to install the firmare images.
for information on where to install the firmware images.
You will also very likely need the Wireless Tools in order to
configure your card:
......@@ -262,7 +262,7 @@ config AIRO
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
......@@ -411,7 +411,7 @@ config AIRO_CS
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment