Kconfig

config BCM63XX_ENET
	tristate "Broadcom 63xx internal mac support"
	depends on BCM63XX
	select MII
	select PHYLIB
	help
	  This driver supports the ethernet MACs in the Broadcom 63xx
	  MIPS chipset family (BCM63XX).

config FTMAC100
	tristate "Faraday FTMAC100 10/100 Ethernet support"
	depends on ARM
	select MII
	help
	  This driver supports the FTMAC100 10/100 Ethernet controller
	  from Faraday. It is used on Faraday A320, Andes AG101 and some
	  other ARM/NDS32 SoC's.

config LANTIQ_ETOP
	tristate "Lantiq SoC ETOP driver"
	depends on SOC_TYPE_XWAY
	help
	  Support for the MII0 inside the Lantiq SoC


source "drivers/net/fs_enet/Kconfig"

source "drivers/net/octeon/Kconfig"

endif # NET_ETHERNET

#
#	Gigabit Ethernet
#

menuconfig NETDEV_1000
	bool "Ethernet (1000 Mbit)"
	depends on !UML
	default y
	---help---
	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
	  type of Local Area Network (LAN) in universities and companies.

	  Say Y here to get to see options for Gigabit Ethernet drivers.
	  This option alone does not add any kernel code.
	  Note that drivers supporting both 100 and 1000 MBit may be listed
	  under "Ethernet (10 or 100MBit)" instead.

	  If you say N, all options in this submenu will be skipped and disabled.

if NETDEV_1000

config ACENIC
	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
	depends on PCI
	---help---
	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
	  adapter. The driver allows for using the Jumbo Frame option (9000
	  bytes/frame) however it requires that your switches can handle this
	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
	  line.

	  To compile this driver as a module, choose M here: the
	  module will be called acenic.

config ACENIC_OMIT_TIGON_I
	bool "Omit support for old Tigon I based AceNICs"
	depends on ACENIC
	help
	  Say Y here if you only have Tigon II based AceNICs and want to leave
	  out support for the older Tigon I based cards which are no longer
	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
	  version)).  This will reduce the size of the driver object by
	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
	  Tigon II, say N here.

	  The safe and default value for this is N.

config DL2K
	tristate "DL2000/TC902x-based Gigabit Ethernet support"
	depends on PCI
	select CRC32
	help
	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
	  which includes
	  D-Link DGE-550T Gigabit Ethernet Adapter.
	  D-Link DL2000-based Gigabit Ethernet Adapter.
	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.

	  To compile this driver as a module, choose M here: the
	  module will be called dl2k.

config E1000
	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go 
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called e1000.

config E1000E
	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
	select CRC32
	depends on PCI && (!SPARC32 || BROKEN)
	select CRC32
	---help---
	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
	  use the regular e1000 driver For more information on how to
	  identify your adapter, go to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called e1000e.

config IP1000
	tristate "IP1000 Gigabit Ethernet support"
	depends on PCI && EXPERIMENTAL
	select MII
	---help---
	  This driver supports IP1000 gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called ipg.  This is recommended.

config IGB
	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called igb.

config IGB_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IGB && DCA && !(IGB=y && DCA=m)
	---help---
	  Say Y here if you want to use Direct Cache Access (DCA) in the
	  driver.  DCA is a method for warming the CPU cache before data
	  is used, with the intent of lessening the impact of cache misses.

config IGBVF
	tristate "Intel(R) 82576 Virtual Function Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) 82576 virtual functions.  For more
	  information on how to identify your adapter, go to the Adapter &
	  Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called igbvf.

source "drivers/net/ixp2000/Kconfig"

config MYRI_SBUS
	tristate "MyriCOM Gigabit Ethernet support"
	depends on SBUS
	help
	  This driver supports MyriCOM Sbus gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called myri_sbus.  This is recommended.

config NS83820
	tristate "National Semiconductor DP83820 support"
	depends on PCI
	help
	  This is a driver for the National Semiconductor DP83820 series
	  of gigabit ethernet MACs.  Cards using this chipset include
	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
	  zero copy.

config HAMACHI
	tristate "Packet Engines Hamachi GNIC-II support"
	depends on PCI
	select MII
	help
	  If you have a Gigabit Ethernet card of this type, say Y and read
	  the Ethernet-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

	  To compile this driver as a module, choose M here. The module will be
	  called hamachi.

config YELLOWFIN
	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
	depends on PCI && EXPERIMENTAL
	select CRC32
	---help---
	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
	  used by the Beowulf Linux cluster project.  See
	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
	  information about this driver in particular and Beowulf in general.

	  To compile this driver as a module, choose M here: the module
	  will be called yellowfin.  This is recommended.

config R8169
	tristate "Realtek 8169 gigabit ethernet support"
	depends on PCI
	select FW_LOADER
	select CRC32
	select MII
	---help---
	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.

	  To compile this driver as a module, choose M here: the module
	  will be called r8169.  This is recommended.

config SB1250_MAC
	tristate "SB1250 Gigabit Ethernet support"
	depends on SIBYTE_SB1xxx_SOC
	select PHYLIB
	---help---
	  This driver supports Gigabit Ethernet interfaces based on the
	  Broadcom SiByte family of System-On-a-Chip parts.  They include
	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
	  and BCM1480 chips.

	  To compile this driver as a module, choose M here: the module
	  will be called sb1250-mac.

config SIS190
	tristate "SiS190/SiS191 gigabit ethernet support"
	depends on PCI
	select CRC32
	select MII
	---help---
	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
	  appear in lan on motherboard designs which are based on SiS 965
	  and SiS 966 south bridge.

	  To compile this driver as a module, choose M here: the module
	  will be called sis190.  This is recommended.

config SKGE
	tristate "New SysKonnect GigaEthernet support"
	depends on PCI
	select CRC32
	---help---
	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
	  and related Gigabit Ethernet adapters. It is a new smaller driver
	  with better performance and more complete ethtool support.

	  It does not support the link failover and network management 
	  features that "portable" vendor supplied sk98lin driver does.

	  This driver supports adapters based on the original Yukon chipset:
	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.

	  It does not support the newer Yukon2 chipset: a separate driver,
	  sky2, is provided for Yukon2-based adapters.

	  To compile this driver as a module, choose M here: the module
	  will be called skge.  This is recommended.

config SKGE_DEBUG
	bool "Debugging interface"
	depends on SKGE && DEBUG_FS
	help
	  This option adds the ability to dump driver state for debugging.
	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
	  transmit and receive rings.

	  If unsure, say N.

config SKY2
	tristate "SysKonnect Yukon2 support"
	depends on PCI
	select CRC32
	---help---
	  This driver supports Gigabit Ethernet adapters based on the
	  Marvell Yukon 2 chipset:
	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21

	  There is companion driver for the older Marvell Yukon and
	  Genesis based adapters: skge.

	  To compile this driver as a module, choose M here: the module
	  will be called sky2.  This is recommended.

config SKY2_DEBUG
	bool "Debugging interface"
	depends on SKY2 && DEBUG_FS
	help
	  This option adds the ability to dump driver state for debugging.
	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
	  transmit and receive rings.

	  If unsure, say N.

config VIA_VELOCITY
	tristate "VIA Velocity support"
	depends on PCI
	select CRC32
	select CRC_CCITT
	select MII
	help
	  If you have a VIA "Velocity" based network card say Y here.

	  To compile this driver as a module, choose M here. The module
	  will be called via-velocity.

config TIGON3
	tristate "Broadcom Tigon3 support"
	depends on PCI
	select PHYLIB
	help
	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called tg3.  This is recommended.

config BNX2
	tristate "Broadcom NetXtremeII support"
	depends on PCI
	select CRC32
	select FW_LOADER
	help
	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called bnx2.  This is recommended.

config CNIC
	tristate "Broadcom CNIC support"
	depends on PCI
	select BNX2
	select UIO
	help
	  This driver supports offload features of Broadcom NetXtremeII
	  gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called cnic.  This is recommended.

config SPIDER_NET
	tristate "Spider Gigabit Ethernet driver"
	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
	select FW_LOADER
	help
	  This driver supports the Gigabit Ethernet chips present on the
	  Cell Processor-Based Blades from IBM.

config TSI108_ETH
	tristate "Tundra TSI108 gigabit Ethernet support"
	depends on TSI108_BRIDGE
	help
	  This driver supports Tundra TSI108 gigabit Ethernet ports.
	  To compile this driver as a module, choose M here: the module
	  will be called tsi108_eth.

config GELIC_NET
	tristate "PS3 Gigabit Ethernet driver"
	depends on PPC_PS3
	select PS3_SYS_MANAGER
	help
	  This driver supports the network device on the PS3 game
	  console.  This driver has built-in support for Ethernet.

	  To compile this driver as a module, choose M here: the
	  module will be called ps3_gelic.

config GELIC_WIRELESS
	bool "PS3 Wireless support"
	depends on WLAN
	depends on GELIC_NET
	select WIRELESS_EXT
	help
	  This option adds the support for the wireless feature of PS3.
	  If you have the wireless-less model of PS3 or have no plan to
	  use wireless feature, disabling this option saves memory.  As
	  the driver automatically distinguishes the models, you can
	  safely enable this option even if you have a wireless-less model.

config FSL_PQ_MDIO
	tristate "Freescale PQ MDIO"
	depends on FSL_SOC
	select PHYLIB
	help
	  This driver supports the MDIO bus used by the gianfar and UCC drivers.

config GIANFAR
	tristate "Gianfar Ethernet"
	depends on FSL_SOC
	select FSL_PQ_MDIO
	select PHYLIB
	select CRC32
	help
	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
	  and MPC86xx family of chips, and the FEC on the 8540.

config UCC_GETH
	tristate "Freescale QE Gigabit Ethernet"
	depends on QUICC_ENGINE
	select FSL_PQ_MDIO
	select PHYLIB
	help
	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
	  which is available on some Freescale SOCs.

config UGETH_TX_ON_DEMAND
	bool "Transmit on Demand support"
	depends on UCC_GETH

config MV643XX_ETH
	tristate "Marvell Discovery (643XX) and Orion ethernet support"
	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
	select INET_LRO
	select PHYLIB
	help
	  This driver supports the gigabit ethernet MACs in the
	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
	  in the Marvell Orion ARM SoC family.

	  Some boards that use the Discovery chipset are the Momenco
	  Ocelot C and Jaguar ATX and Pegasos II.

config XILINX_LL_TEMAC
	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
	depends on PPC || MICROBLAZE
	select PHYLIB
	help
	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
	  core used in Xilinx Spartan and Virtex FPGAs

config QLA3XXX
	tristate "QLogic QLA3XXX Network Driver Support"
	depends on PCI
	help
	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called qla3xxx.

config ATL1
	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
	depends on PCI
	select CRC32
	select MII
	help
	  This driver supports the Atheros/Attansic L1 gigabit ethernet
	  adapter.

	  To compile this driver as a module, choose M here.  The module
	  will be called atl1.

config ATL1E
	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
	depends on PCI && EXPERIMENTAL
	select CRC32
	select MII
	help
	  This driver supports the Atheros L1E gigabit ethernet adapter.

	  To compile this driver as a module, choose M here.  The module
	  will be called atl1e.

config ATL1C
	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
	depends on PCI && EXPERIMENTAL
	select CRC32
	select MII
	help
	  This driver supports the Atheros L1C gigabit ethernet adapter.

	  To compile this driver as a module, choose M here.  The module
	  will be called atl1c.

config JME
	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
	depends on PCI
	select CRC32
	select MII
	---help---
	  This driver supports the PCI-Express gigabit ethernet adapters
	  based on JMicron JMC250 chipset.

	  To compile this driver as a module, choose M here. The module
	  will be called jme.

config S6GMAC
	tristate "S6105 GMAC ethernet support"
	depends on XTENSA_VARIANT_S6000
	select PHYLIB
	help
	  This driver supports the on chip ethernet device on the
	  S6105 xtensa processor.

	  To compile this driver as a module, choose M here. The module
	  will be called s6gmac.

source "drivers/net/stmmac/Kconfig"

config PCH_GBE
	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
	depends on PCI
	select MII
	---help---
	  This is a gigabit ethernet driver for EG20T PCH.
	  EG20T PCH is the platform controller hub that is used in Intel's
	  general embedded platform.
	  EG20T PCH has Gigabit Ethernet interface.
	  Using this interface, it is able to access system devices connected
	  to Gigabit Ethernet.
	  This driver enables Gigabit Ethernet function.

	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
	  Output Hub), ML7223.
	  ML7223 IOH is for MP(Media Phone) use.
	  ML7223 is companion chip for Intel Atom E6xx series.
	  ML7223 is completely compatible for Intel EG20T PCH.

endif # NETDEV_1000

#
#	10 Gigabit Ethernet
#

menuconfig NETDEV_10000
	bool "Ethernet (10000 Mbit)"
	depends on !UML
	default y
	---help---
	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
	  This option alone does not add any kernel code.

	  If you say N, all options in this submenu will be skipped and disabled.

if NETDEV_10000

config MDIO
	tristate

config CHELSIO_T1
	tristate "Chelsio 10Gb Ethernet support"
	depends on PCI
	select CRC32
	select MDIO
	help
	  This driver supports Chelsio gigabit and 10-gigabit
	  Ethernet cards. More information about adapter features and
	  performance tuning is in <file:Documentation/networking/cxgb.txt>.

	  For general information about Chelsio and our products, visit
	  our website at <http://www.chelsio.com>.

	  For customer support, please visit our customer support page at
	  <http://www.chelsio.com/support.html>.

	  Please send feedback to <linux-bugs@chelsio.com>.

	  To compile this driver as a module, choose M here: the module
	  will be called cxgb.

config CHELSIO_T1_1G
	bool "Chelsio gigabit Ethernet support"
	depends on CHELSIO_T1
	help
	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
	  are using only 10G cards say 'N' here.

config CHELSIO_T3
	tristate "Chelsio Communications T3 10Gb Ethernet support"
	depends on PCI && INET
	select FW_LOADER
	select MDIO
	help
	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
	  adapters.

	  For general information about Chelsio and our products, visit
	  our website at <http://www.chelsio.com>.

	  For customer support, please visit our customer support page at
	  <http://www.chelsio.com/support.html>.

	  Please send feedback to <linux-bugs@chelsio.com>.

	  To compile this driver as a module, choose M here: the module
	  will be called cxgb3.

config CHELSIO_T4
	tristate "Chelsio Communications T4 Ethernet support"
	depends on PCI
	select FW_LOADER
	select MDIO
	help
	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
	  adapters.

	  For general information about Chelsio and our products, visit
	  our website at <http://www.chelsio.com>.

	  For customer support, please visit our customer support page at
	  <http://www.chelsio.com/support.html>.

	  Please send feedback to <linux-bugs@chelsio.com>.

	  To compile this driver as a module choose M here; the module
	  will be called cxgb4.

config CHELSIO_T4VF
	tristate "Chelsio Communications T4 Virtual Function Ethernet support"
	depends on PCI
	help
	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
	  adapters with PCI-E SR-IOV Virtual Functions.

	  For general information about Chelsio and our products, visit
	  our website at <http://www.chelsio.com>.

	  For customer support, please visit our customer support page at
	  <http://www.chelsio.com/support.html>.

	  Please send feedback to <linux-bugs@chelsio.com>.

	  To compile this driver as a module choose M here; the module
	  will be called cxgb4vf.

config EHEA
	tristate "eHEA Ethernet support"
	depends on IBMEBUS && INET && SPARSEMEM
	select INET_LRO
	---help---
	  This driver supports the IBM pSeries eHEA ethernet adapter.

	  To compile the driver as a module, choose M here. The module
	  will be called ehea.

config ENIC
	tristate "Cisco VIC Ethernet NIC Support"
	depends on PCI && INET
	help
	  This enables the support for the Cisco VIC Ethernet card.

config IXGBE
	tristate "Intel(R) 10GbE PCI Express adapters support"
	depends on PCI && INET
	select MDIO
	---help---
	  This driver supports Intel(R) 10GbE PCI Express family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called ixgbe.

config IXGBE_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
	---help---
	  Say Y here if you want to use Direct Cache Access (DCA) in the
	  driver.  DCA is a method for warming the CPU cache before data
	  is used, with the intent of lessening the impact of cache misses.

config IXGBE_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on IXGBE && DCB
	---help---
	  Say Y here if you want to use Data Center Bridging (DCB) in the
	  driver.

	  If unsure, say N.

config IXGBEVF
	tristate "Intel(R) 82599 Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	  This driver supports Intel(R) 82599 virtual functions.  For more
	  information on how to identify your adapter, go to the Adapter &
	  Driver ID Guide at:

	  <http://support.intel.com/support/network/sb/CS-008441.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/ixgbevf.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called ixgbevf.  MSI-X interrupt support is required
	  for this driver to work correctly.

config IXGB
	tristate "Intel(R) PRO/10GbE support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/10GbE family of adapters for
	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
	  instead. For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/ixgb.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called ixgb.

config S2IO
	tristate "Exar Xframe 10Gb Ethernet Adapter"
	depends on PCI
	---help---
	  This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.

	  More specific information on configuring the driver is in 
	  <file:Documentation/networking/s2io.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called s2io.

config VXGE
	tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
	depends on PCI && INET
	---help---
	  This driver supports Exar Corp's X3100 Series 10 GbE PCIe
	  I/O Virtualized Server Adapter.

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/vxge.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called vxge.

config VXGE_DEBUG_TRACE_ALL
	bool "Enabling All Debug trace statments in driver"
	default n
	depends on VXGE
	---help---
	  Say Y here if you want to enabling all the debug trace statements in
	  the vxge driver. By default only few debug trace statements are
	  enabled.

config MYRI10GE
	tristate "Myricom Myri-10G Ethernet support"
	depends on PCI && INET
	select FW_LOADER
	select CRC32
	select INET_LRO
	---help---
	  This driver supports Myricom Myri-10G Dual Protocol interface in
	  Ethernet mode. If the eeprom on your board is not recent enough,
	  you will need a newer firmware image.
	  You may get this image or more information, at:

	  <http://www.myri.com/scs/download-Myri10GE.html>

	  To compile this driver as a module, choose M here. The module
	  will be called myri10ge.

config MYRI10GE_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
	---help---
	  Say Y here if you want to use Direct Cache Access (DCA) in the
	  driver.  DCA is a method for warming the CPU cache before data
	  is used, with the intent of lessening the impact of cache misses.

config NETXEN_NIC
	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
	depends on PCI
	select FW_LOADER
	help
	  This enables the support for NetXen's Gigabit Ethernet card.

config NIU
	tristate "Sun Neptune 10Gbit Ethernet support"
	depends on PCI
	select CRC32
	help
	  This enables support for cards based upon Sun's
	  Neptune chipset.

config PASEMI_MAC
	tristate "PA Semi 1/10Gbit MAC"
	depends on PPC_PASEMI && PCI && INET
	select PHYLIB
	select INET_LRO
	help
	  This driver supports the on-chip 1/10Gbit Ethernet controller on
	  PA Semi's PWRficient line of chips.

config MLX4_EN
	tristate "Mellanox Technologies 10Gbit Ethernet support"
	depends on PCI && INET
	select MLX4_CORE
	select INET_LRO
	help
	  This driver supports Mellanox Technologies ConnectX Ethernet
	  devices.

config MLX4_CORE
	tristate
	depends on PCI
	default n

config MLX4_DEBUG
	bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
	depends on MLX4_CORE
	default y
	---help---
	  This option causes debugging code to be compiled into the
	  mlx4_core driver.  The output can be turned on via the
	  debug_level module parameter (which can also be set after
	  the driver is loaded through sysfs).

config TEHUTI
	tristate "Tehuti Networks 10G Ethernet"
	depends on PCI
	help
	  Tehuti Networks 10G Ethernet NIC

config BNX2X
	tristate "Broadcom NetXtremeII 10Gb support"
	depends on PCI
	select FW_LOADER
	select ZLIB_INFLATE
	select LIBCRC32C
	select MDIO
	help
	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
	  To compile this driver as a module, choose M here: the module
	  will be called bnx2x.  This is recommended.

config QLCNIC
	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
	depends on PCI
	select FW_LOADER
	help
	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
	  devices.

config QLGE
	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
	depends on PCI
	help
	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.

	  To compile this driver as a module, choose M here: the module
	  will be called qlge.

config BNA
	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
	depends on PCI
	---help---
	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
	  cards.
	  To compile this driver as a module, choose M here: the module
	  will be called bna.

	  For general information and support, go to the Brocade support
	  website at:

	  <http://support.brocade.com>

source "drivers/net/sfc/Kconfig"

source "drivers/net/benet/Kconfig"

endif # NETDEV_10000

source "drivers/net/tokenring/Kconfig"

source "drivers/net/wireless/Kconfig"

source "drivers/net/wimax/Kconfig"

source "drivers/net/usb/Kconfig"

source "drivers/net/pcmcia/Kconfig"

source "drivers/net/wan/Kconfig"

source "drivers/atm/Kconfig"

source "drivers/ieee802154/Kconfig"

source "drivers/s390/net/Kconfig"

source "drivers/net/caif/Kconfig"

config TILE_NET
	tristate "Tilera GBE/XGBE network driver support"
	depends on TILE
	default y
	select CRC32
	help
	  This is a standard Linux network device driver for the
	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.

	  To compile this driver as a module, choose M here: the module
	  will be called tile_net.

config XEN_NETDEV_FRONTEND
	tristate "Xen network device frontend driver"
	depends on XEN
	select XEN_XENBUS_FRONTEND
	default y
	help
	  This driver provides support for Xen paravirtual network
	  devices exported by a Xen network driver domain (often
	  domain 0).

	  The corresponding Linux backend driver is enabled by the
	  CONFIG_XEN_NETDEV_BACKEND option.

	  If you are compiling a kernel for use as Xen guest, you
	  should say Y here. To compile this driver as a module, chose
	  M here: the module will be called xen-netfront.

config XEN_NETDEV_BACKEND
	tristate "Xen backend network device"
	depends on XEN_BACKEND
	help
	  This driver allows the kernel to act as a Xen network driver
	  domain which exports paravirtual network devices to other
	  Xen domains. These devices can be accessed by any operating
	  system that implements a compatible front end.

	  The corresponding Linux frontend driver is enabled by the
	  CONFIG_XEN_NETDEV_FRONTEND configuration option.

	  The backend driver presents a standard network device
	  endpoint for each paravirtual network device to the driver
	  domain network stack. These can then be bridged or routed
	  etc in order to provide full network connectivity.

	  If you are compiling a kernel to run in a Xen network driver
	  domain (often this is domain 0) you should say Y here. To
	  compile this driver as a module, chose M here: the module