Commit 2b5b3a60 authored by Scott Wood's avatar Scott Wood Committed by David S. Miller
Browse files

fs_enet: Convert mii-bitbang to use the generic bitbang MDIO code.


Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent e2ec4581
......@@ -15,15 +15,13 @@
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/mdio-bitbang.h>
#ifdef CONFIG_PPC_CPM_NEW_BINDING
#include <linux/of_platform.h>
......@@ -32,11 +30,11 @@
#include "fs_enet.h"
struct bb_info {
struct mdiobb_ctrl ctrl;
__be32 __iomem *dir;
__be32 __iomem *dat;
u32 mdio_msk;
u32 mdc_msk;
int delay;
};
/* FIXME: If any other users of GPIO crop up, then these will have to
......@@ -59,212 +57,58 @@ static inline int bb_read(u32 __iomem *p, u32 m)
return (in_be32(p) & m) != 0;
}
static inline void mdio_active(struct bb_info *bitbang)
static inline void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
{
bb_set(bitbang->dir, bitbang->mdio_msk);
}
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
static inline void mdio_tristate(struct bb_info *bitbang)
{
bb_clr(bitbang->dir, bitbang->mdio_msk);
if (dir)
bb_set(bitbang->dir, bitbang->mdio_msk);
else
bb_clr(bitbang->dir, bitbang->mdio_msk);
/* Read back to flush the write. */
in_be32(bitbang->dir);
}
static inline int mdio_read(struct bb_info *bitbang)
static inline int mdio_read(struct mdiobb_ctrl *ctrl)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
return bb_read(bitbang->dat, bitbang->mdio_msk);
}
static inline void mdio(struct bb_info *bitbang, int what)
static inline void mdio(struct mdiobb_ctrl *ctrl, int what)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
bb_set(bitbang->dat, bitbang->mdio_msk);
else
bb_clr(bitbang->dat, bitbang->mdio_msk);
/* Read back to flush the write. */
in_be32(bitbang->dat);
}
static inline void mdc(struct bb_info *bitbang, int what)
static inline void mdc(struct mdiobb_ctrl *ctrl, int what)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (what)
bb_set(bitbang->dat, bitbang->mdc_msk);
else
bb_clr(bitbang->dat, bitbang->mdc_msk);
}
static inline void mii_delay(struct bb_info *bitbang)
{
udelay(bitbang->delay);
}
/* Utility to send the preamble, address, and register (common to read and write). */
static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg)
{
int j;
/*
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
* The IEEE spec says this is a PHY optional requirement. The AMD
* 79C874 requires one after power up and one after a MII communications
* error. This means that we are doing more preambles than we need,
* but it is safer and will be much more robust.
*/
mdio_active(bitbang);
mdio(bitbang, 1);
for (j = 0; j < 32; j++) {
mdc(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
}
/* send the start bit (01) and the read opcode (10) or write (10) */
mdc(bitbang, 0);
mdio(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 0);
mdio(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 0);
mdio(bitbang, read);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 0);
mdio(bitbang, !read);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
/* send the PHY address */
for (j = 0; j < 5; j++) {
mdc(bitbang, 0);
mdio(bitbang, (addr & 0x10) != 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
addr <<= 1;
}
/* send the register address */
for (j = 0; j < 5; j++) {
mdc(bitbang, 0);
mdio(bitbang, (reg & 0x10) != 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
reg <<= 1;
}
/* Read back to flush the write. */
in_be32(bitbang->dat);
}
static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location)
{
u16 rdreg;
int ret, j;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
struct bb_info* bitbang = bus->priv;
bitbang_pre(bitbang, 1, addr, reg);
/* tri-state our MDIO I/O pin so we can read */
mdc(bitbang, 0);
mdio_tristate(bitbang);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
/* check the turnaround bit: the PHY should be driving it to zero */
if (mdio_read(bitbang) != 0) {
/* PHY didn't drive TA low */
for (j = 0; j < 32; j++) {
mdc(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
}
ret = -1;
goto out;
}
mdc(bitbang, 0);
mii_delay(bitbang);
/* read 16 bits of register data, MSB first */
rdreg = 0;
for (j = 0; j < 16; j++) {
mdc(bitbang, 1);
mii_delay(bitbang);
rdreg <<= 1;
rdreg |= mdio_read(bitbang);
mdc(bitbang, 0);
mii_delay(bitbang);
}
mdc(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
ret = rdreg;
out:
return ret;
}
static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val)
{
int j;
struct bb_info* bitbang = bus->priv;
u8 addr = phy_id & 0xff;
u8 reg = location & 0xff;
u16 value = val & 0xffff;
bitbang_pre(bitbang, 0, addr, reg);
/* send the turnaround (10) */
mdc(bitbang, 0);
mdio(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
mdc(bitbang, 0);
mdio(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
/* write 16 bits of register data, MSB first */
for (j = 0; j < 16; j++) {
mdc(bitbang, 0);
mdio(bitbang, (value & 0x8000) != 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
value <<= 1;
}
/*
* Tri-state the MDIO line.
*/
mdio_tristate(bitbang);
mdc(bitbang, 0);
mii_delay(bitbang);
mdc(bitbang, 1);
mii_delay(bitbang);
return 0;
}
static int fs_enet_mii_bb_reset(struct mii_bus *bus)
{
/*nothing here - dunno how to reset it*/
return 0;
}
static struct mdiobb_ops bb_ops = {
.owner = THIS_MODULE,
.set_mdc = mdc,
.set_mdio_dir = mdio_dir,
.set_mdio_data = mdio,
.get_mdio_data = mdio_read,
};
#ifdef CONFIG_PPC_CPM_NEW_BINDING
static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
......@@ -305,7 +149,6 @@ static int __devinit fs_mii_bitbang_init(struct mii_bus *bus,
bitbang->dat = bitbang->dir + 4;
bitbang->mdio_msk = 1 << (31 - mdio_pin);
bitbang->mdc_msk = 1 << (31 - mdc_pin);
bitbang->delay = 1; /* 1 us between operations */
return 0;
}
......@@ -336,23 +179,21 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
int ret = -ENOMEM;
int i;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (!new_bus)
goto out;
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
if (!bitbang)
goto out_free_bus;
goto out;
bitbang->ctrl.ops = &bb_ops;
new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!new_bus)
goto out_free_priv;
new_bus->priv = bitbang;
new_bus->name = "CPM2 Bitbanged MII",
new_bus->read = &fs_enet_mii_bb_read,
new_bus->write = &fs_enet_mii_bb_write,
new_bus->reset = &fs_enet_mii_bb_reset,
ret = fs_mii_bitbang_init(new_bus, ofdev->node);
if (ret)
goto out_free_bitbang;
goto out_free_bus;
new_bus->phy_mask = ~0;
new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
......@@ -380,10 +221,10 @@ out_free_irqs:
kfree(new_bus->irq);
out_unmap_regs:
iounmap(bitbang->dir);
out_free_bitbang:
kfree(bitbang);
out_free_bus:
kfree(new_bus);
out_free_priv:
free_mdio_bitbang(new_bus);
out:
return ret;
}
......@@ -394,6 +235,7 @@ static int fs_enet_mdio_remove(struct of_device *ofdev)
struct bb_info *bitbang = bus->priv;
mdiobus_unregister(bus);
free_mdio_bitbang(bus);
dev_set_drvdata(&ofdev->dev, NULL);
kfree(bus->irq);
iounmap(bitbang->dir);
......@@ -417,12 +259,12 @@ static struct of_platform_driver fs_enet_bb_mdio_driver = {
.remove = fs_enet_mdio_remove,
};
int fs_enet_mdio_bb_init(void)
static int fs_enet_mdio_bb_init(void)
{
return of_register_platform_driver(&fs_enet_bb_mdio_driver);
}
void fs_enet_mdio_bb_exit(void)
static void fs_enet_mdio_bb_exit(void)
{
of_unregister_platform_driver(&fs_enet_bb_mdio_driver);
}
......@@ -437,7 +279,6 @@ static int __devinit fs_mii_bitbang_init(struct bb_info *bitbang,
bitbang->dat = (u32 __iomem *)fmpi->mdio_dat.offset;
bitbang->mdio_msk = 1U << (31 - fmpi->mdio_dat.bit);
bitbang->mdc_msk = 1U << (31 - fmpi->mdc_dat.bit);
bitbang->delay = fmpi->delay;
return 0;
}
......@@ -453,20 +294,19 @@ static int __devinit fs_enet_mdio_probe(struct device *dev)
if (NULL == dev)
return -EINVAL;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
if (NULL == new_bus)
if (NULL == bitbang)
return -ENOMEM;
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
bitbang->ctrl.ops = &bb_ops;
if (NULL == bitbang)
new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (NULL == new_bus)
return -ENOMEM;
new_bus->name = "BB MII Bus",
new_bus->read = &fs_enet_mii_bb_read,
new_bus->write = &fs_enet_mii_bb_write,
new_bus->reset = &fs_enet_mii_bb_reset,
new_bus->id = pdev->id;
new_bus->phy_mask = ~0x9;
......@@ -498,8 +338,8 @@ static int __devinit fs_enet_mdio_probe(struct device *dev)
return 0;
bus_register_fail:
free_mdio_bitbang(new_bus);
kfree(bitbang);
kfree(new_bus);
return err;
}
......@@ -512,9 +352,7 @@ static int fs_enet_mdio_remove(struct device *dev)
dev_set_drvdata(dev, NULL);
iounmap((void *) (&bus->priv));
bus->priv = NULL;
kfree(bus);
free_mdio_bitbang(bus);
return 0;
}
......@@ -535,4 +373,4 @@ void fs_enet_mdio_bb_exit(void)
{
driver_unregister(&fs_enet_bb_mdio_driver);
}
#endif
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment