Skip to content
  • Nishanth Menon's avatar
    ARM: OMAP5 / DRA7: Introduce workaround for 801819 · c0053bd5
    Nishanth Menon authored
    Add workaround for Cortex-A15 ARM erratum 801819 which says in summary
    that "A livelock can occur in the L2 cache arbitration that might
    prevent a snoop from completing. Under certain conditions this can
    cause the system to deadlock. "
    
    Recommended workaround is as follows:
    Do both of the following:
    
    1) Do not use the write-back no-allocate memory type.
    2) Do not issue write-back cacheable stores at any time when the cache
    is disabled (SCTLR.C=0) and the MMU is enabled (SCTLR.M=1). Because it
    is implementation defined whether cacheable stores update the cache when
    the cache is disabled it is not expected that any portable code will
    execute cacheable stores when the cache is disabled.
    
    For implementations of Cortex-A15 configured without the “L2 arbitration
    register slice” option (typically one or two core systems), you must
    also do the following:
    
    3) Disable write-streaming in each CPU by setting ACTLR[28:25] = 0b1111
    
    So, we provide an option to disable write streaming on OMAP5 and DRA7.
    It is a rare condition to occur and may be enabled selectively based
    on platform acceptance of risk.
    
    Applies to: A15 revisions r2p0, r2p1, r2p2, r2p3 or r2p4 and REVIDR[3]
    is set to 0.
    
    Based on ARM errata Document revision 18.0 (22 Nov 2013)
    
    Note: the configuration for the workaround needs to be done with
    each CPU bringup, since CPU0 bringup is done by bootloader, it is
    recommended to have the workaround in the bootloader, kernel also does
    ensure that CPU0 has the workaround and makes the workaround active
    when CPU1 gets active.
    
    With CONFIG_SMP disabled, it is expected to be done by the bootloader.
    
    This does show significant degradation in synthetic tests such as
    mbw (https://packages.qa.debian.org/m/mbw.html
    
    )
    mbw -n 100 100|grep AVG (on a test platform)
    Without enabling the erratum:
    AVG Method: MEMCPY  Elapsed: 0.13406  MiB: 100.00000  Copy: 745.913 MiB/s
    AVG Method: DUMB    Elapsed: 0.06746  MiB: 100.00000  Copy: 1482.357 MiB/s
    AVG Method: MCBLOCK Elapsed: 0.03058  MiB: 100.00000  Copy: 3270.569 MiB/s
    After enabling the erratum:
    AVG Method: MEMCPY  Elapsed: 0.13757  MiB: 100.00000  Copy: 726.913 MiB/s
    AVG Method: DUMB    Elapsed: 0.12024  MiB: 100.00000  Copy: 831.668 MiB/s
    AVG Method: MCBLOCK Elapsed: 0.09243  MiB: 100.00000  Copy: 1081.942 MiB/s
    
    Most benchmarks are designed for specific performance analysis, so
    overall usecase must be considered before making a decision to
    enable/disable the erratum workaround.
    
    Pending internal investigation, the erratum is kept disabled by default.
    
    Cc: Russell King <rmk+kernel@arm.linux.org.uk>
    Cc: Catalin Marinas <catalin.marinas@arm.com>
    Cc: Tony Lindgren <tony@atomide.com>
    Suggested-by: default avatarRichard Woodruff <r-woodruff2@ti.com>
    Suggested-by: default avatarBrad Griffis <bgriffis@ti.com>
    Signed-off-by: default avatarNishanth Menon <nm@ti.com>
    Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
    c0053bd5