Select Git revision
Search by author
- Any Author
- authors
-
Abhiram Balasubramanian abhiram
-
Anton Burtsev
aburtsev
-
Charlie Jacobsen cjacobsen
-
David Detweiler ddetweiler
-
David Johnson johnsond
-
Michael Quigley MichaelQuigley
-
Mike Hibler hibler
-
Robert Ricci ricci
-
Sarah Spall spall
-
Scotty Bauer ScottyB
-
Vikram Narayanan vikram
- Nov 11, 2011
-
-
Yogesh Ashok Powar authored
Functions mwifiex_11n_dispatch_pkt_until_start_win and mwifiex_11n_scan_and_dispatch used to always return value zero for all inputs. Changing these functions to void. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Yogesh Ashok Powar authored
Use existing helper function mwifiex_fill_cap_info to fill the HT CAP info for ibss beacons. Also removing extra parenthesis block for better readability. Signed-off-by:
-
Yogesh Ashok Powar authored
A local variable is used to calculate ht_cap_info. Erroneously ht_cap.cap_info isn't updated in the ibss beacons after the calculation. This patch fixes it. Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
-
- Nov 09, 2011
-
-
Dan Carpenter authored
Probably we never hit this condition, but in case we do, we may as well put a return here instead of just printing a warning message and then corrupting memory. The caller doesn't check the return code. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Amitkumar Karwar authored
By default SDIO multiport aggregation is disabled. It's useful to get good throughput results. This patch enables it. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Dan Carpenter authored
We dereference adapter in the error handling code so this needed to be fixed. This function is always called like: adapter->if_ops.host_to_card(adapter, ...); so adapter can never be NULL and I've removed the NULL check. Signed-off-by:
-
Dan Carpenter authored
The previous if statement means this that pointer is NULL so there is no need to free it. Signed-off-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
Use SSB macros in order to clean up brcmfmac code Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Prepare for adding backplane interconnect type support Reviewed-by:
-
Franky Lin authored
Merged brcmf_sdbrcm_chip_attach into brcmf_sdio_chip_attach for better readability. Reviewed-by:
-
Franky Lin authored
Same register writes have been done in brcmf_sdbrcm_probe_init which is earlier in the same code path. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This will provide a better code flow that fits the logic Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
This patch is part of the abstracting chip backplane handle code series. Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
-
Franky Lin authored
This patch is part of abstracting chip backplane handle code series. Reviewed-by:
-
Franky Lin authored
Currently backplane handle code is scatterd around dhd_sdio.c which is not good for maintenance and adding new backplane interconnect type support. This patch and the follow up patches are going to abstract all chip backplane control code specific for sdio bus into this new sdio_chip.c Reviewed-by:
-
Franky Lin authored
4329 with chiprev 0 can not be found on any product. The code can be removed. Reviewed-by:
-
Johannes Berg authored
For probe responses it can be useful to not wait for ACK to avoid retransmissions if the station that sent the probe is already on the next channel, so allow userspace to request not caring about the ACK with a new nl80211 flag. Since mac80211 needs to be updated for the new function prototype anyway implement it right away -- it's just a few lines of code. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Add the ability to advertise that the device contains the AP SME and what features it can support. There are currently no features in the bitmap -- probe response offload will be advertised by a few patches Arik is working on now (who took over from Guy Eilam) and a device with AP SME will typically implement and require response offload. Signed-off-by:
-
Ben Greear authored
Add interface address so it can be mapped to a local interface. Add max-ampdu and mpdu-density. Print out the tid->baw_size Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Stanislav Yakovlev authored
Looks like no one uses it. Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Jouni Malinen authored
Based on a quick test, TDLS seemed to be working fine with ath9k, so let's start advertising support for this in the driver. Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
David Kilroy authored
The pointer returned by cfg80211_inform_bss is a referenced struct. The orinoco driver does not need to keep the struct, so we just release it. Signed-off-by:
David Kilroy <kilroyd@googlemail.com> Signed-off-by:
-
Jussi Kivilinna authored
Patch fixes rndis_wlan to release referenced BSS structure returned by cfg80211_inform_bss(). Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
John W. Linville authored
Signed-off-by:
-
- Nov 08, 2011
-
-
Rajkumar Manoharan authored
The initval tables are updated as per system team input to improve rx performance and power accuracy at 5GHz. Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
AR9462 chips have the capabilities to provoide bluetooth profile information. For non-AR9462 btcoex chips, the BT priority traffic was identified by periodically polling the respective registers and updated dutycycle, stomptype, etc. As AR9462 chip offers the BT profile informations, let us make use of that to update aggregation limit, dutycycle, stomptype and wieghtages. Signed-off-by:
-
Rajkumar Manoharan authored
To improve CCK sensitivity for AR9462 chips, performing spur mitigation at 2440, 2464 frequencies alone is sufficient. Signed-off-by:
-
Jouni Malinen authored
Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
Arend van Spriel authored
The buffer endianess conversion functions in srom.c had a size argument giving number of bytes but the function converts words. Providing the number of words to the function is more sensible so that is done in this patch. Reported-by:
Pavel Roskin <proski@gnu.org> Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
-
Franky Lin authored
The usage of state decrease readability. Optimize the code flow to get rid of it Reviewed-by:
-
Franky Lin authored
Make a proper use of private data area of net device by storing interface related data structure instead of generic driver data Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Franky Lin authored
Use brcmf_add_if for primary and virtual net device interfaces. This is part of the net device interface clean up for fullmac. Reviewed-by:
-
Arend van Spriel authored
In the receive path the frames are obtained from the dma using multiple sk_buff that were linked using the skb next pointer. This has been changed and it now used sk_buff lists and skb_queue functions instead. Reported-by:
-
