Select Git revision
Search by author
- Any Author
- authors
-
Abhiram Balasubramanian abhiram
-
Anton Burtsev
aburtsev
-
Charlie Jacobsen cjacobsen
-
David Detweiler ddetweiler
-
David Johnson johnsond
-
Michael Quigley MichaelQuigley
-
Mike Hibler hibler
-
Robert Ricci ricci
-
Sarah Spall spall
-
Scotty Bauer ScottyB
-
Vikram Narayanan vikram
- Sep 09, 2010
-
-
Florian Fainelli authored
Replace asm/io.h and asm/cpu.h wih linux/io.h and linux/cpu.h Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Use pr_(info|err) and pr_cont where required instead of calls to printk. Add missing pr_fmt to the driver. Signed-off-by:
-
Florian Fainelli authored
One line has not been changed because it would not improve readability. Signed-off-by:
-
Florian Fainelli authored
This patch fixes the following checkpatch.pl warnings: - spaces after tabs - space between function and arguments - one-line statement braces - tabs instead of spaces Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Eric Dumazet authored
Use the net_device provided net_device_stats structure. Remove ixgbevf_get_stats() now its not needed. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- Sep 08, 2010
-
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Ondrej Zary authored
Ignore ADSL routers, which can have the same vendor and product IDs as ADSL modems but should be handled by the cx82310_eth driver. This intentionally ignores device IDs that aren't currently handled by cx82310_eth. There may be other device IDs that perhaps shouldn't be claimed by cxacru. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
Greg Rose authored
The VF has no flash and can only do memory mapped I/O. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Joe Perches authored
Reduce indentation in a couple of places Add static function ixgbe_psum Add temporary for adapter->stats Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Did not add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt because no printk in this module used message prefixing. Signed-off-by:
-
Joe Perches authored
Whitespace cleanups. Move inline keyword after function type declarations. Signed-off-by:
-
Alexander Duyck authored
The ordering of operations was messed up in the init and as a result when VMDQ was enabled we were trying to enable TX rings before setting the VFTE bits. This resulted in a ring that appeared to fail to enable when in fact it was blocked because the VFTE bits were cleared after the reset. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Frank Blaschka authored
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Mike Frysinger authored
Since the claw code calls ccwgroup_remove_ccwdev(), we need to make sure CCWGROUP is enabled when CLAW is enabled. Otherwise we hit fun undefined references at build time: ERROR: "ccwgroup_remove_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_probe_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_register" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_unregister" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_create_from_string" [drivers/s390/net/claw.ko] undefined! Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Joe Perches authored
Format an ipv6 address using vsprintf extensions. Signed-off-by:
-
Jan Glauber authored
Extend the qdio API to allow polling in the upper-layer driver. This is needed by qeth to use NAPI. To use the new interface the upper-layer driver must specify the queue_start_poll(). This callback is used to signal the upper-layer driver that is has initiative and must process the inbound queue by calling qdio_get_next_buffers(). If the upper-layer driver wants to stop polling it calls qdio_start_irq(). Since adapter interrupts are not completely stoppable qdio implements a software bit QDIO_QUEUE_IRQS_DISABLED to safely disable interrupts for an input queue. The old interface is preserved and will be used as is by zfcp. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jesse Brandeburg authored
Several users report issues with 32-bit adapters when plugged into PCI slots in machines with >= 4GB ram. In particular AMD systems with HyperTransport to PCI bridges seem to trigger the issue, but it isn't limited to only them. This issue is not easily reproducible here, yet still continues to occur in the field. For e1000 on PCI devices, just disable DMA addresses over the 4GB boundary when in PCI (not PCI-X) mode, to prevent the issue from continuing to pop up. The performance impact for this is negligible. The code was refactored to move the init of the hw struct to its own function. This allows the init to be called very early in probe, which then allows using hw-> members for this fix. A slight refactor to the DMA mask code was done for minor correctness based on the instructions in DMA-API-HOWTO. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by:
-
Ondrej Zary authored
This patch introduces cx82310_eth driver - driver for USB ethernet port of ADSL routers based on Conexant CX82310 chips. Such routers usually have ethernet port(s) too which are bridged together with the USB ethernet port, allowing the USB-connected machine to communicate to the network (and also internet through the ADSL, of course). This is my first driver, so please check thoroughly. As there's no protocol documentation, it was done with usbsnoop dumps from Windows driver, some parts (the commands) inspired by cxacru driver and also other usbnet drivers. The driver passed my testing - some real work and also pings sized from 0 to 65507 B. The only problem I found is the ifconfig error counter. When I return 0 (or 1 but empty skb) from rx_fixup(), usbnet increases the error counter although it's not an error condition (because packets can cross URB boundaries). Maybe the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some other value, e.g. 2)? The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems using cxacru driver (they probably use the same chipset but simpler firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The driver matches only devices with class 255 and checks for the iProduct string during init. I already posted a patch for the cxacru driver to ignore these devices. Signed-off-by:
-
- Sep 07, 2010
-
-
Eric Dumazet authored
- Use napi_gro_receive() and vlan_gro_receive() - Enable GRO by default Tested on a RTL8111/8168 adapter Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Yaniv Rosner authored
Note that the date format was fixed. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Change LED scheme for dual-media Signed-off-by:
-
Yaniv Rosner authored
Add required changes in order to support dual-media boards. Signed-off-by:
-
Yaniv Rosner authored
Group all PHY specific functions together to have an organized code Signed-off-by:
-
Yaniv Rosner authored
Make the needed changes for the new scheme especially around PHY initialization, and link detection. - The get_emac_base function was changed to enable setting different MAC access setting for each PHY based of external configuration. - As a part of the dual-media preparation, the save_spirom_version was modified to accept a PHY specific version address to be saved in the shmem. This will enable to save more than single spirom version in different locations. - The test_link function was changed also as a preparation for the dual-media upcoming changes - Duplicate initialization logic was removed from the link_setting_status and link_initialize functions Signed-off-by:
-
Yaniv Rosner authored
Move all PHY specific logic from bnx2x_main into bnx2x_link. Signed-off-by:
-
Yaniv Rosner authored
Flow control implementation is split to be done in each PHY function. Signed-off-by:
-
Yaniv Rosner authored
In previous patch, common PHY functions were split in simple way to allow easy diff. This patch comes to align code in the new functions. In addition, the non-production BCM8072 PHY was removed. Signed-off-by:
-
Yaniv Rosner authored
Move the code into PHY oriented functions, and for that a new structure is defines for each PHY which contain PHY properties and its own functions. This also enables to encapsulate all PHY specific operations into the PHY functions. During initialization, the PHYs will be probed by the "bnx2x_phy_probe" function to detect which PHYs exist on-board, and configure them accordingly. Note that the ext_phy_reset implementation was incorporated in the ext_phy_init since it is actually part of the PHY initialization procedure. Signed-off-by:
-
Yaniv Rosner authored
Start building the infrastructure for dual media by adding new component of PHY which will be used all along the function. Modify function to work with this component instead of the link_params. Signed-off-by:
-
- Sep 06, 2010
-
-
Yevgeny Petrilin authored
The values didn't match the title after removing the LRO statistics in commit fa37a958 Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Christian Dietrich authored
The CHELSIO_T1_1G ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by:
Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by:
-
Joe Perches authored
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by:
-
Dan Carpenter authored
This showed up in my audit because we use strcpy() to copy "ds" into a 32 character buffer inside the isdn_tty_dial() function. But it turns out that we only ever use the first 32 characters so it's OK. I have changed the declaration to make the static checkers happy. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
cs->ics.parm.setup.phone is a 32 character array. In each of these cases we're copying from a 35 character array into a 32 character array so we should use strlcpy() instead of strcpy(). Signed-off-by:
-
Jiri Slaby authored
bnad_set_rx_mode omit to unlock bna_lock on one fail path. Fix that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Debashis Dutt <ddutt@brocade.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julia Lawall authored
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/ ) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
