"README.md" did not exist on "0268102d53c872b42e214f95492065c8058b042e"
- Jul 21, 2011
-
-
Johannes Berg authored
It seems that due to merge issues between different trees or so this function prototype wasn't removed when it should have been, do it now. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Wey-Yi Guy authored
After driver split, extra _agn in priv structure is no needed, remove it. Signed-off-by: -
Johannes Berg authored
iwlagn keeps a copy of key stuff internally but never actually uses it, so remove it. Signed-off-by:
-
Wey-Yi Guy authored
Move tm_fixed_rate inside CONFIG_IWLWIFI_DEVICE_SVTOOL and only available when the option is enable. Signed-off-by: -
Emmanuel Grumbach authored
WoWLAN may need the NIC even after suspend. One should not do anything to the NIC in the bus level, since one cannot check whether WoWLAN is enabled or not. Same for resume. Add a simple comment to the code to warn about this. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The price to pay is the access to the log system. Therefore logs from bus layer are sent by dev_printk instead of IWL_XXXX. Rename bus->priv to bus->drv_data to make the separation even clearer. Signed-off-by:
-
Emmanuel Grumbach authored
Call iwl_probe with a ready iwl_bus struct. This means that the bus layer assigns the irq, dev and iwl_bus_ops pointers to iwl_bus before giving it to iwl_probe. The device specific struct is allocated together with the common iwl_bus struct by the bus specific layer. The pointer to the aggregate struct is passed to the upper layer that holds a pointer to iwl_bus instead of an embedded iw_bus. The private data given to the PCI subsystem is now iwl_bus and not iwl_priv. Provide bus_* inliners on the way in order to simplify the syntax. Rename iwl-pci.h -> iwl-bus.h since it is bus agnostic and represent the external of the bus layer. Signed-off-by:
-
Emmanuel Grumbach authored
It still holds a pointer to iwl_priv. But hopefully this will disappear at some point. Also add the multiple inclusion protection to iwl-trans.h that was forgotten. Move iwl-trans structures to iwl-trans.h Signed-off-by:
-
Emmanuel Grumbach authored
This function is really related to the transport layer - move it. Signed-off-by:
-
Emmanuel Grumbach authored
Basically all the nic_init flow should be in the transport layer. iwl_prepare_card_hw will move to the transport too in a separate patch. Signed-off-by:
-
Emmanuel Grumbach authored
All the configurations of the HW for AMPDU are now in the transport layer. Signed-off-by:
-
Wey-Yi Guy authored
For temperature offset calibration, send radio sensor offset in le16 format Signed-off-by: -
Wey-Yi Guy authored
Use the valid calibration mask for init calibration Signed-off-by: -
Wey-Yi Guy authored
IWL_PHY_CALIBRATE_DIFF_GAIN_CMD is for legacy device, remove it Signed-off-by: -
Wey-Yi Guy authored
Set calibration config flag for complete notification Signed-off-by: -
Emmanuel Grumbach authored
Since iwlagn_setup_deferred_work is always called, fold it into iwl_setup_deferred_work. BT related works are setup by the new bt_setup_deferred_work lib_ops. Signed-off-by:
Wey-Yi Guy <wey-yi.guy@intel.com>
-
Emmanuel Grumbach authored
Since iwlagn_rx_handler_setup is always called, fold it into iwl_rx_handler_setup. BT related handlers are setup by the new bt_rx_handler_setup lib_ops. Signed-off-by:
-
Emmanuel Grumbach authored
kick_nic means to remove the RESET bit from the embedded CPU Signed-off-by:
-
- Jul 20, 2011
-
-
Daniel Drake authored
Previously, the mesh was running whenever the appropriate hardware and firmware was present. Now we only run the mesh when the interface is running. Also simplifies interface management a little. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Daniel Drake authored
Remove unused blindlist code. Mark a few items const and static where possible. Involved some code re-ordering, but no code changes. Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Acked-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Pavel Roskin authored
Both ath5k_hw and ath5k_softc represent one instance of the hardware. This duplication is historical and is not needed anymore. Keep the name "ath5k_hw" for the merged structure and "ah" for the variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more descriptive and more widely used. Put the combined structure to ath5k.h where the old ath5k_softc used to be. Move some code from base.h to ath5k.h as needed. Remove memory allocation for struct ath5k_hw and the corresponding error handling. Merge iobase and ah_iobase fields. Signed-off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
- Jul 19, 2011
-
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Some of the newer Broadcom chipsets have longe names like BCM43224, BCM43225, etc. However Broadcom decided to keep using u16 for storing them. Use %X or %d depending on chip_id value to avoid BCMA8D8, etc. Signed-off-by:
-
Rafał Miłecki authored
Old masks were causing ugly, delayed lock ups. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Following operation was incorrectly translated: radio_read(0x0011) -> 0xffff radio_write(0x0011) <- 0xfff7 Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Also change the default channel to 11. This is the first channel closed driver switches to. Signed-off-by:
-
Rafał Miłecki authored
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use special R/W ops for it. Signed-off-by:
-
- Jul 18, 2011
-
-
Rajkumar Manoharan authored
drivers/net/wireless/ath/ath9k/hif_usb.c +135 hif_usb_mgmt_cb(6) warn: variable dereferenced before check 'cmd' drivers/net/wireless/ath/ath9k/btcoex.c +77 ath9k_hw_init_btcoex_hw(38) error: buffer overflow 'ah->hw_gen_timers.gen_timer_index' 32 <= 2009813776 Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
drivers/net/wireless/ath/ath9k/init.c:199:21: warning: context imbalance in 'ath9k_reg_rmw' - different lock contexts for basic block drivers/net/wireless/ath/ath9k/xmit.c:1175:31: warning: context imbalance in 'ath_drain_txq_list' - unexpected unlock drivers/net/wireless/ath/ath9k/xmit.c:2047:23: warning: context imbalance in 'ath_tx_process_buffer' - unexpected unlock drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3041:24: warning: cast to restricted __le32 Signed-off-by:
-
Rafał Miłecki authored
We use all that functions by pointers only. This forces compiler to create additional duplicated functions that are not inline. Noticed by Michael in similar bcma code. Signed-off-by:
-
Christian Lamparter authored
Harshal Chhaya discovered during network tests, that several of his clients dropped-off the network. The captured packets shows that the beacons sent by the AP are at a much lower power than the other data packets. The reason for this mishap: The driver never updated the beacon phy register, so all beacons were always sent at the lowest power. Reference: http://marc.info/?l=linux-wireless&m=131067225105801 Reported-by:
Harshal Chhaya <harshal@gmail.com> Signed-off-by:
-
Christian Lamparter authored
Signed-off-by:
-
Christian Lamparter authored
* reserves feature bit for CCA counters * extends hardware register file definitions Signed-off-by:
-
