Commit f07a6c49 authored by Nick Kossifidis's avatar Nick Kossifidis Committed by John W. Linville
Browse files

ath5k: Update PCU code



* In set_opmode don't handle antenna settings and preserve other STA_ID1 settings
(shouldn't matter because we call it during reset but it makes things cleaner)
Also set properly AP/ADHOC indicator flag on CFG while setting AP/ADHOC modes
and always enable key search mode.

* Properly set BSSID Mask during reset (cache it and reuse it durring set_associd)

* Update beacon_init to flush pending BMISS interrupts and handle setting of adhoc
beacon ATIM policy flag for ad-hoc mode. Also set TSF to 0 to start TSF increment
on AP mode. We need to handle sleep timers for AR5212 there + add support for PCF.

* Properly clean MIC key from keytable when TKIP is used (Bob is working on set_key
function etc so i leave it for now).

Tested on AR5212 (Hainan) and AR5413 and works fine

v2 Set PISR on AR5211+ and ISR on AR5210, got to sleep more ;-)

Changes-Licensed-under: ISC
Signed-Off-by: default avatarNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2c706002
......@@ -1093,10 +1093,11 @@ struct ath5k_hw {
u8 ah_sta_id[ETH_ALEN];
/* Current BSSID we are trying to assoc to / creating.
/* Current BSSID we are trying to assoc to / create.
* This is passed by mac80211 on config_interface() and cached here for
* use in resets */
u8 ah_bssid[ETH_ALEN];
u8 ah_bssid_mask[ETH_ALEN];
u32 ah_gpio[AR5K_MAX_GPIO];
int ah_gpio_npins;
......
......@@ -46,34 +46,45 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
{
u32 pcu_reg, beacon_reg, low_id, high_id;
pcu_reg = 0;
/* Preserve rest settings */
pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
| AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
(AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
beacon_reg = 0;
ATH5K_TRACE(ah->ah_sc);
switch (ah->ah_op_mode) {
case NL80211_IFTYPE_ADHOC:
pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
beacon_reg |= AR5K_BCR_ADHOC;
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
beacon_reg |= AR5K_BCR_AP;
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
break;
case NL80211_IFTYPE_STATION:
pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_PWR_SV : 0);
case NL80211_IFTYPE_MONITOR:
pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
| (ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
break;
......@@ -130,6 +141,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
}
/* TODO: Handle ANI stats */
}
/**
......@@ -254,6 +267,10 @@ void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
* @mac: The card's mac address
*
* Set station id on hw using the provided mac address
*
* NOTE: This is only called during attach, don't call it
* on reset because it overwrites all AR5K_STA_ID1 settings.
* We have set_opmode (above) for reset.
*/
int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
{
......@@ -290,8 +307,10 @@ void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
* Set simple BSSID mask on 5212
*/
if (ah->ah_version == AR5K_AR5212) {
ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
AR5K_BSS_IDM0);
ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
AR5K_BSS_IDM1);
}
/*
......@@ -415,6 +434,9 @@ int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
u32 low_id, high_id;
ATH5K_TRACE(ah->ah_sc);
/* Cache bssid mask so that we can restore it
* on reset */
memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
if (ah->ah_version == AR5K_AR5212) {
low_id = AR5K_LOW_ID(mask);
high_id = AR5K_HIGH_ID(mask);
......@@ -576,7 +598,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
filter |= AR5K_RX_FILTER_PROM;
}
/*Zero length DMA*/
/*Zero length DMA (phy error reporting) */
if (data)
AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
else
......@@ -661,7 +683,12 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
* Set the additional timers by mode
*/
switch (ah->ah_op_mode) {
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_STATION:
/* In STA mode timer1 is used as next wakeup
* timer and timer2 as next CFP duration start
* timer. Both in 1/8TUs. */
/* TODO: PCF handling */
if (ah->ah_version == AR5K_AR5210) {
timer1 = 0xffffffff;
timer2 = 0xffffffff;
......@@ -669,27 +696,60 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
timer1 = 0x0000ffff;
timer2 = 0x0007ffff;
}
/* Mark associated AP as PCF incapable for now */
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF);
break;
case NL80211_IFTYPE_ADHOC:
AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM);
default:
/* On non-STA modes timer1 is used as next DMA
* beacon alert (DBA) timer and timer2 as next
* software beacon alert. Both in 1/8TUs. */
timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
break;
}
/* Timer3 marks the end of our ATIM window
* a zero length window is not allowed because
* we 'll get no beacons */
timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
/*
* Set the beacon register and enable all timers.
* (next beacon, DMA beacon, software beacon, ATIM window time)
*/
ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
/* When in AP mode zero timer0 to start TSF */
if (ah->ah_op_mode == NL80211_IFTYPE_AP)
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
else
ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
/* Force a TSF reset if requested and enable beacons */
if (interval & AR5K_BEACON_RESET_TSF)
ath5k_hw_reset_tsf(ah);
ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
AR5K_BEACON);
AR5K_BEACON_ENABLE),
AR5K_BEACON);
/* Flush any pending BMISS interrupts on ISR by
* performing a clear-on-write operation on PISR
* register for the BMISS bit (writing a bit on
* ISR togles a reset for that bit and leaves
* the rest bits intact) */
if (ah->ah_version == AR5K_AR5210)
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR);
else
ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR);
/* TODO: Set enchanced sleep registers on AR5212
* based on vif->bss_conf params, until then
* disable power save reporting.*/
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV);
}
#if 0
......@@ -899,14 +959,25 @@ int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
*/
int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
{
unsigned int i;
unsigned int i, type;
ATH5K_TRACE(ah->ah_sc);
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry));
for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
/* Reset associated MIC entry if TKIP
* is enabled located at offset (entry + 64) */
if (type == AR5K_KEYTABLE_TYPE_TKIP) {
entry = entry + AR5K_KEYTABLE_MIC_OFFSET;
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++)
ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
}
/*
* Set NULL encryption on AR5212+
*
......
......@@ -1114,14 +1114,16 @@
#define AR5K_PCU_MAX 0x8fff
/*
* First station id register (MAC address in lower 32 bits)
* First station id register (Lower 32 bits of MAC address)
*/
#define AR5K_STA_ID0 0x8000
#define AR5K_STA_ID0 0x8000
#define AR5K_STA_ID0_ARRD_L32 0xffffffff
/*
* Second station id register (MAC address in upper 16 bits)
* Second station id register (Upper 16 bits of MAC address + PCU settings)
*/
#define AR5K_STA_ID1 0x8004 /* Register Address */
#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */
......@@ -1811,6 +1813,10 @@
#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7)
#define AR5K_KEYTABLE_VALID 0x00008000
/* If key type is TKIP and MIC is enabled
* MIC key goes in offset entry + 64 */
#define AR5K_KEYTABLE_MIC_OFFSET 64
/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit
* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit
* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment