Commit d3570a5a authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernel

* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...
parents 37d9869e 72474be6
......@@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-hda-intel
--------------------
Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
ATI SB450, SB600, RS600,
Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
PCH, SCH),
ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
RV630, RV635, RV670, RV770,
VIA VT8251/VT8237A,
SIS966, ULI M5461
......@@ -807,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC260
hp HP machines
hp-3013 HP machines (3013-variant)
hp-dc7600 HP DC7600
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
......@@ -828,8 +831,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
sony-assamd Sony ASSAMD
toshiba-s06 Toshiba S06
toshiba-rx1 Toshiba RX1
ultra Samsung Q1 Ultra Vista model
lenovo-3000 Lenovo 3000 y410
nec NEC Versa S9100
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)
......@@ -838,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
acer-aspire Acer Aspire One
dell Dell OEM laptops (Vostro 1200)
zepto Zepto laptops
test for testing/debugging purpose, almost all controls can
......@@ -847,6 +854,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ALC269
basic Basic preset
quanta Quanta FL1
eeepc-p703 ASUS Eeepc P703 P900A
eeepc-p901 ASUS Eeepc P901 S101
ALC662/663
3stack-dig 3-stack (2-channel) with SPDIF
......@@ -856,10 +866,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo laptop
eeepc-p701 ASUS Eeepc P701
eeepc-ep20 ASUS Eeepc EP20
ecs ECS/Foxconn mobo
m51va ASUS M51VA
g71v ASUS G71V
h13 ASUS H13
g50v ASUS G50V
asus-mode1 ASUS
asus-mode2 ASUS
asus-mode3 ASUS
asus-mode4 ASUS
asus-mode5 ASUS
asus-mode6 ASUS
auto auto-config reading BIOS (default)
ALC882/885
......@@ -891,12 +908,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
lenovo-101e Lenovo 101E
lenovo-nb0763 Lenovo NB0763
lenovo-ms7195-dig Lenovo MS7195
lenovo-sky Lenovo Sky
haier-w66 Haier W66
3stack-hp HP machines with 3stack (Lucknow, Samba boards)
6stack-dell Dell machines with 6stack (Inspiron 530)
mitac Mitac 8252D
clevo-m720 Clevo M720 laptop series
fujitsu-pi2515 Fujitsu AMILO Pi2515
3stack-6ch-intel Intel DG33* boards
auto auto-config reading BIOS (default)
ALC861/660
......@@ -929,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
AD1882
AD1882 / AD1882A
3stack 3-stack mode (default)
6stack 6-stack mode
......@@ -1079,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
register value without FIFO size correction as the current
DMA pointer. position_fix=2 will make the driver to use
the position buffer instead of reading SD_LPIB register.
(Usually SD_LPLIB register is more accurate than the
(Usually SD_LPIB register is more accurate than the
position buffer.)
NB: If you get many "azx_get_response timeout" messages at
......@@ -1166,6 +1185,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Event Electronics, EZ8
* Digigram VX442
* Lionstracs, Mediastaton
* Terrasoniq TS 88
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
......@@ -1200,7 +1220,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* TerraTec Phase 22
* TerraTec Phase 28
* AudioTrak Prodigy 7.1
* AudioTrak Prodigy 7.1LT
* AudioTrak Prodigy 7.1 LT
* AudioTrak Prodigy 7.1 XT
* AudioTrak Prodigy 7.1 HIFI
* AudioTrak Prodigy 7.1 HD2
* AudioTrak Prodigy 192
* Pontis MS300
* Albatron K8X800 Pro II
......@@ -1211,12 +1234,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* Shuttle SN25P
* Onkyo SE-90PCI
* Onkyo SE-200PCI
* ESI Juli@
* Hercules Fortissimo IV
* EGO-SYS WaveTerminal 192M
model - Use the given board model, one of the following:
revo51, revo71, amp2000, prodigy71, prodigy71lt,
prodigy192, aureon51, aureon71, universe, ap192,
k8x800, phase22, phase28, ms300, av710, se200pci,
se90pci
prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
juli, aureon51, aureon71, universe, ap192, k8x800,
phase22, phase28, ms300, av710, se200pci, se90pci,
fortissimo4, sn25p, WT192M
This module supports multiple cards and autoprobe.
......@@ -1255,7 +1282,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for AC'97 motherboards from Intel and compatibles.
* Intel i810/810E, i815, i820, i830, i84x, MX440
ICH5, ICH6, ICH7, ESB2
ICH5, ICH6, ICH7, 6300ESB, ESB2
* SiS 7012 (SiS 735)
* NVidia NForce, NForce2, NForce3, MCP04, CK804
CK8, CK8S, MCP501
......@@ -1951,6 +1978,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* CHIC True Sound 4Dwave
* Shark Predator4D-PCI
* Jaton SonicWave 4D
* SiS SI7018 PCI Audio
* Hoontech SoundTrack Digital 4DWave NX
pcm_channels - max channels (voices) reserved for PCM
wavetable_size - max wavetable size in kB (4-?kb)
......@@ -1966,12 +1995,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
vid - Vendor ID for the device (optional)
pid - Product ID for the device (optional)
nrpacks - Max. number of packets per URB (default: 8)
async_unlink - Use async unlink mode (default: yes)
device_setup - Device specific magic number (optional)
- Influence depends on the device
- Default: 0x0000
ignore_ctl_error - Ignore any USB-controller regarding mixer
interface (default: no)
This module supports multiple devices, autoprobe and hotplugging.
NB: nrpacks parameter can be modified dynamically via sysfs.
Don't put the value over 20. Changing via sysfs has no sanity
check.
NB: async_unlink=0 would cause Oops. It remains just for
debugging purpose (if any).
NB: ignore_ctl_error=1 may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
buggy USB device or the controller.
Module snd-usb-caiaq
--------------------
......@@ -2078,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
i.e., Xonar D1, DX, D2 and D2X.
i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
This module supports autoprobe and multiple cards.
......
......@@ -6135,44 +6135,58 @@ struct _snd_pcm_runtime {
</para>
</section>
<section id="useful-functions-snd-assert">
<title><function>snd_assert()</function></title>
<section id="useful-functions-snd-bug">
<title><function>snd_BUG()</function></title>
<para>
<function>snd_assert()</function> macro is similar with the
normal <function>assert()</function> macro. For example,
It shows the <computeroutput>BUG?</computeroutput> message and
stack trace as well as <function>snd_BUG_ON</function> at the point.
It's useful to show that a fatal error happens there.
</para>
<para>
When no debug flag is set, this macro is ignored.
</para>
</section>
<section id="useful-functions-snd-bug-on">
<title><function>snd_BUG_ON()</function></title>
<para>
<function>snd_BUG_ON()</function> macro is similar with
<function>WARN_ON()</function> macro. For example,
<informalexample>
<programlisting>
<![CDATA[
snd_assert(pointer != NULL, return -EINVAL);
snd_BUG_ON(!pointer);
]]>
</programlisting>
</informalexample>
</para>
<para>
The first argument is the expression to evaluate, and the
second argument is the action if it fails. When
<constant>CONFIG_SND_DEBUG</constant>, is set, it will show an
error message such as <computeroutput>BUG? (xxx)</computeroutput>
together with stack trace.
</para>
<para>
When no debug flag is set, this macro is ignored.
</para>
</section>
or it can be used as the condition,
<informalexample>
<programlisting>
<![CDATA[
if (snd_BUG_ON(non_zero_is_bug))
return -EINVAL;
]]>
</programlisting>
</informalexample>
<section id="useful-functions-snd-bug">
<title><function>snd_BUG()</function></title>
<para>
It shows the <computeroutput>BUG?</computeroutput> message and
stack trace as well as <function>snd_assert</function> at the point.
It's useful to show that a fatal error happens there.
</para>
<para>
When no debug flag is set, this macro is ignored.
The macro takes an conditional expression to evaluate.
When <constant>CONFIG_SND_DEBUG</constant>, is set, the
expression is actually evaluated. If it's non-zero, it shows
the warning message such as
<computeroutput>BUG? (xxx)</computeroutput>
normally followed by stack trace. It returns the evaluated
value.
When no <constant>CONFIG_SND_DEBUG</constant> is set, this
macro always returns zero.
</para>
</section>
</chapter>
......
......@@ -3828,6 +3828,8 @@ S: Maintained
SOUND
P: Jaroslav Kysela
M: perex@perex.cz
P: Takashi Iwai
M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
......
......@@ -3,7 +3,7 @@
*
* Do not include this file directly. It's included from linux/mtd/xip.h
*
* Author: Vladimir Barinov <vbarinov@ru.mvista.com>
* Author: Vladimir Barinov <vbarinov@embeddedalley.com>
*
* (c) 2005 MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
......
......@@ -203,6 +203,10 @@ config SOUND
tristate
default UML_SOUND
config SOUND_OSS_CORE
bool
default UML_SOUND
config HOSTAUDIO
tristate
default UML_SOUND
......
......@@ -488,10 +488,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream,
period_size = params_period_bytes(hw_params);
periods = params_periods(hw_params);
snd_assert(period_size >= 0x100 && period_size <= 0x10000,
return -EINVAL);
snd_assert(periods >= 4, return -EINVAL);
snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL);
if (period_size < 0x100 || period_size > 0x10000)
return -EINVAL;
if (periods < 4)
return -EINVAL;
if (period_size * periods > 1024 * 1024)
return -EINVAL;
dev = saa7134->dev;
......@@ -942,7 +944,8 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip)
unsigned int idx;
int err;
snd_assert(chip != NULL, return -EINVAL);
if (snd_BUG_ON(!chip))
return -EINVAL;
strcpy(card->mixername, "SAA7134 Mixer");
for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_controls); idx++) {
......
/*
* IXP4XX EHCI Host Controller Driver
*
* Author: Vladimir Barinov <vbarinov@ru.mvista.com>
* Author: Vladimir Barinov <vbarinov@embeddedalley.com>
*
* Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
*
......
#ifndef __SOUND_AD1848_H
#define __SOUND_AD1848_H
/*
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
* Definitions for AD1847/AD1848/CS4248 chips
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include "pcm.h"
#include <linux/interrupt.h>
/* IO ports */
#define AD1848P( chip, x ) ( (chip) -> port + c_d_c_AD1848##x )
#define c_d_c_AD1848REGSEL 0
#define c_d_c_AD1848REG 1
#define c_d_c_AD1848STATUS 2
#define c_d_c_AD1848PIO 3
/* codec registers */
#define AD1848_LEFT_INPUT 0x00 /* left input control */
#define AD1848_RIGHT_INPUT 0x01 /* right input control */
#define AD1848_AUX1_LEFT_INPUT 0x02 /* left AUX1 input control */
#define AD1848_AUX1_RIGHT_INPUT 0x03 /* right AUX1 input control */
#define AD1848_AUX2_LEFT_INPUT 0x04 /* left AUX2 input control */
#define AD1848_AUX2_RIGHT_INPUT 0x05 /* right AUX2 input control */
#define AD1848_LEFT_OUTPUT 0x06 /* left output control register */
#define AD1848_RIGHT_OUTPUT 0x07 /* right output control register */
#define AD1848_DATA_FORMAT 0x08 /* clock and data format - playback/capture - bits 7-0 MCE */
#define AD1848_IFACE_CTRL 0x09 /* interface control - bits 7-2 MCE */
#define AD1848_PIN_CTRL 0x0a /* pin control */
#define AD1848_TEST_INIT 0x0b /* test and initialization */
#define AD1848_MISC_INFO 0x0c /* miscellaneous information */
#define AD1848_LOOPBACK 0x0d /* loopback control */
#define AD1848_DATA_UPR_CNT 0x0e /* playback/capture upper base count */
#define AD1848_DATA_LWR_CNT 0x0f /* playback/capture lower base count */
/* definitions for codec register select port - CODECP( REGSEL ) */
#define AD1848_INIT 0x80 /* CODEC is initializing */
#define AD1848_MCE 0x40 /* mode change enable */
#define AD1848_TRD 0x20 /* transfer request disable */
/* definitions for codec status register - CODECP( STATUS ) */
#define AD1848_GLOBALIRQ 0x01 /* IRQ is active */
/* definitions for AD1848_LEFT_INPUT and AD1848_RIGHT_INPUT registers */
#define AD1848_ENABLE_MIC_GAIN 0x20
#define AD1848_MIXS_LINE1 0x00
#define AD1848_MIXS_AUX1 0x40
#define AD1848_MIXS_LINE2 0x80
#define AD1848_MIXS_ALL 0xc0
/* definitions for clock and data format register - AD1848_PLAYBK_FORMAT */
#define AD1848_LINEAR_8 0x00 /* 8-bit unsigned data */
#define AD1848_ALAW_8 0x60 /* 8-bit A-law companded */
#define AD1848_ULAW_8 0x20 /* 8-bit U-law companded */
#define AD1848_LINEAR_16 0x40 /* 16-bit twos complement data - little endian */
#define AD1848_STEREO 0x10 /* stereo mode */
/* bits 3-1 define frequency divisor */
#define AD1848_XTAL1 0x00 /* 24.576 crystal */
#define AD1848_XTAL2 0x01 /* 16.9344 crystal */
/* definitions for interface control register - AD1848_IFACE_CTRL */
#define AD1848_CAPTURE_PIO 0x80 /* capture PIO enable */
#define AD1848_PLAYBACK_PIO 0x40 /* playback PIO enable */
#define AD1848_CALIB_MODE 0x18 /* calibration mode bits */
#define AD1848_AUTOCALIB 0x08 /* auto calibrate */
#define AD1848_SINGLE_DMA 0x04 /* use single DMA channel */
#define AD1848_CAPTURE_ENABLE 0x02 /* capture enable */
#define AD1848_PLAYBACK_ENABLE 0x01 /* playback enable */
/* definitions for pin control register - AD1848_PIN_CTRL */
#define AD1848_IRQ_ENABLE 0x02 /* enable IRQ */
#define AD1848_XCTL1 0x40 /* external control #1 */
#define AD1848_XCTL0 0x80 /* external control #0 */
/* definitions for test and init register - AD1848_TEST_INIT */
#define AD1848_CALIB_IN_PROGRESS 0x20 /* auto calibrate in progress */
#define AD1848_DMA_REQUEST 0x10 /* DMA request in progress */
/* defines for codec.mode */
#define AD1848_MODE_NONE 0x0000
#define AD1848_MODE_PLAY 0x0001
#define AD1848_MODE_CAPTURE 0x0002
#define AD1848_MODE_TIMER 0x0004
#define AD1848_MODE_OPEN (AD1848_MODE_PLAY|AD1848_MODE_CAPTURE|AD1848_MODE_TIMER)
#define AD1848_MODE_RUNNING 0x0010
/* defines for codec.hardware */
#define AD1848_HW_DETECT 0x0000 /* let AD1848 driver detect chip */
#define AD1848_HW_AD1847 0x0001 /* AD1847 chip */
#define AD1848_HW_AD1848 0x0002 /* AD1848 chip */
#define AD1848_HW_CS4248 0x0003 /* CS4248 chip */
#define AD1848_HW_CMI8330 0x0004 /* CMI8330 chip */
#define AD1848_HW_THINKPAD 0x0005 /* Thinkpad 360/750/755 */
/* IBM Thinkpad specific stuff */
#define AD1848_THINKPAD_CTL_PORT1 0x15e8
#define AD1848_THINKPAD_CTL_PORT2 0x15e9
#define AD1848_THINKPAD_CS4248_ENABLE_BIT 0x02
struct snd_ad1848 {
unsigned long port; /* i/o port */
struct resource *res_port;
int irq; /* IRQ line */
int dma; /* data DMA */
unsigned short version; /* version of CODEC chip */
unsigned short mode; /* see to AD1848_MODE_XXXX */
unsigned short hardware; /* see to AD1848_HW_XXXX */
unsigned short single_dma:1; /* forced single DMA mode (GUS 16-bit daughter board) or dma1 == dma2 */
struct snd_pcm *pcm;
struct snd_pcm_substream *playback_substream;
struct snd_pcm_substream *capture_substream;
struct snd_card *card;
unsigned char image[32]; /* SGalaxy needs an access to extended registers */
int mce_bit;
int calibrate_mute;
int dma_size;
int thinkpad_flag; /* Thinkpad CS4248 needs some extra help */
#ifdef CONFIG_PM
void (*suspend)(struct snd_ad1848 *chip);
void (*resume)(struct snd_ad1848 *chip);
#endif
spinlock_t reg_lock;
};
/* exported functions */
void snd_ad1848_out(struct snd_ad1848 *chip, unsigned char reg, unsigned char value);
int snd_ad1848_create(struct snd_card *card,
unsigned long port,
int irq, int dma,
unsigned short hardware,
struct snd_ad1848 ** chip);
int snd_ad1848_pcm(struct snd_ad1848 * chip, int device, struct snd_pcm **rpcm);
const struct snd_pcm_ops *snd_ad1848_get_pcm_ops(int direction);
int snd_ad1848_mixer(struct snd_ad1848 * chip);
/* exported mixer stuffs */
enum { AD1848_MIX_SINGLE, AD1848_MIX_DOUBLE, AD1848_MIX_CAPTURE };
#define AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) \
((reg) | ((shift) << 8) | ((mask) << 16) | ((invert) << 24))
#define AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) \
((left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | ((shift_right) << 19) | ((mask) << 24) | ((invert) << 22))
/* for ease of use */
struct ad1848_mix_elem {
const char *name;
int index;
int type;
unsigned long private_value;
const unsigned int *tlv;
};
#define AD1848_SINGLE(xname, xindex, reg, shift, mask, invert) \
{ .name = xname, \
.index = xindex, \
.type = AD1848_MIX_SINGLE, \
.private_value = AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) }
#define AD1848_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \
{ .name = xname, \
.index = xindex, \
.type = AD1848_MIX_SINGLE, \
.private_value = AD1848_MIXVAL_SINGLE(reg, shift, mask, invert), \
.tlv = xtlv }
#define AD1848_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
{ .name = xname, \
.index = xindex, \
.type = AD1848_MIX_DOUBLE, \
.private_value = AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) }
#define AD1848_DOUBLE_TLV(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert, xtlv) \
{ .name = xname, \
.index = xindex, \
.type = AD1848_MIX_DOUBLE, \
.private_value = AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert), \
.tlv = xtlv }
int snd_ad1848_add_ctl_elem(struct snd_ad1848 *chip, const struct ad1848_mix_elem *c);
#endif /* __SOUND_AD1848_H */
......@@ -93,9 +93,10 @@ enum {
SNDRV_HWDEP_IFACE_PCXHR, /* Digigram PCXHR */
SNDRV_HWDEP_IFACE_SB_RC, /* SB Extigy/Audigy2NX remote control */
SNDRV_HWDEP_IFACE_HDA, /* HD-audio */
SNDRV_HWDEP_IFACE_USB_STREAM, /* direct access to usb stream */
/* Don't forget to change the following: */
SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_HDA
SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_USB_STREAM
};
struct snd_hwdep_info {
......@@ -296,29 +297,39 @@ struct snd_pcm_info {
unsigned char reserved[64]; /* reserved for future... */
};
typedef int __bitwise snd_pcm_hw_param_t;
#define SNDRV_PCM_HW_PARAM_ACCESS ((__force snd_pcm_hw_param_t) 0) /* Access type */
#define SNDRV_PCM_HW_PARAM_FORMAT ((__force snd_pcm_hw_param_t) 1) /* Format */
#define SNDRV_PCM_HW_PARAM_SUBFORMAT ((__force snd_pcm_hw_param_t) 2) /* Subformat */
typedef int snd_pcm_hw_param_t;
#define SNDRV_PCM_HW_PARAM_ACCESS 0 /* Access type */
#define SNDRV_PCM_HW_PARAM_FORMAT 1 /* Format */
#define SNDRV_PCM_HW_PARAM_SUBFORMAT 2 /* Subformat */
#define SNDRV_PCM_HW_PARAM_FIRST_MASK SNDRV_PCM_HW_PARAM_ACCESS
#define SNDRV_PCM_HW_PARAM_LAST_MASK SNDRV_PCM_HW_PARAM_SUBFORMAT
#define SNDRV_PCM_HW_PARAM_SAMPLE_BITS ((__force snd_pcm_hw_param_t) 8) /* Bits per sample */
#define SNDRV_PCM_HW_PARAM_FRAME_BITS ((__force snd_pcm_hw_param_t) 9) /* Bits per frame */
#define SNDRV_PCM_HW_PARAM_CHANNELS ((__force snd_pcm_hw_param_t) 10) /* Channels */
#define SNDRV_PCM_HW_PARAM_RATE ((__force snd_pcm_hw_param_t) 11) /* Approx rate */
#define SNDRV_PCM_HW_PARAM_PERIOD_TIME ((__force snd_pcm_hw_param_t) 12) /* Approx distance between interrupts in us */
#define SNDRV_PCM_HW_PARAM_PERIOD_SIZE ((__force snd_pcm_hw_param_t) 13) /* Approx frames between interrupts */
#define SNDRV_PCM_HW_PARAM_PERIOD_BYTES ((__force snd_pcm_hw_param_t) 14) /* Approx bytes between interrupts */
#define SNDRV_PCM_HW_PARAM_PERIODS ((__force snd_pcm_hw_param_t) 15) /* Approx interrupts per buffer */
#define SNDRV_PCM_HW_PARAM_BUFFER_TIME ((__force snd_pcm_hw_param_t) 16) /* Approx duration of buffer in us */
#define SNDRV_PCM_HW_PARAM_BUFFER_SIZE ((__force snd_pcm_hw_param_t) 17) /* Size of buffer in frames */
#define SNDRV_PCM_HW_PARAM_BUFFER_BYTES ((__force snd_pcm_hw_param_t) 18) /* Size of buffer in bytes */
#define SNDRV_PCM_HW_PARAM_TICK_TIME ((__force snd_pcm_hw_param_t) 19) /* Approx tick duration in us */
#define SNDRV_PCM_HW_PARAM_SAMPLE_BITS 8 /* Bits per sample */
#define SNDRV_PCM_HW_PARAM_FRAME_BITS 9 /* Bits per frame */
#define SNDRV_PCM_HW_PARAM_CHANNELS 10 /* Channels */
#define SNDRV_PCM_HW_PARAM_RATE 11 /* Approx rate */
#define SNDRV_PCM_HW_PARAM_PERIOD_TIME 12 /* Approx distance between
* interrupts in us
*/
#define SNDRV_PCM_HW_PARAM_PERIOD_SIZE 13 /* Approx frames between
* interrupts
*/
#define SNDRV_PCM_HW_PARAM_PERIOD_BYTES 14 /* Approx bytes between
* interrupts
*/
#define SNDRV_PCM_HW_PARAM_PERIODS 15 /* Approx interrupts per
* buffer
*/
#define SNDRV_PCM_HW_PARAM_BUFFER_TIME 16 /* Approx duration of buffer
* in us
*/
#define SNDRV_PCM_HW_PARAM_BUFFER_SIZE 17 /* Size of buffer in frames */
#define SNDRV_PCM_HW_PARAM_BUFFER_BYTES 18 /* Size of buffer in bytes */
#define SNDRV_PCM_HW_PARAM_TICK_TIME 19 /* Approx tick duration in us */
#define SNDRV_PCM_HW_PARAM_FIRST_INTERVAL SNDRV_PCM_HW_PARAM_SAMPLE_BITS
#define SNDRV_PCM_HW_PARAM_LAST_INTERVAL SNDRV_PCM_HW_PARAM_TICK_TIME
#define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */
#define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */
struct snd_interval {
unsigned int min, max;
......@@ -696,7 +707,7 @@ struct snd_timer_tread {
* *
****************************************************************************/