Commit a8eb7ca0 authored by Tony Lindgren's avatar Tony Lindgren
Browse files

omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3



Replace ARCH_OMAP34XX with ARCH_OMAP3
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 088ef950
......@@ -11,14 +11,9 @@ config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
config ARCH_OMAP34XX
bool "OMAP34xx Based System"
depends on ARCH_OMAP3
select USB_ARCH_HAS_EHCI
config ARCH_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select ARCH_OMAP_OTG
config OMAP_PACKAGE_CBC
......@@ -60,42 +55,42 @@ config MACH_OMAP_2430SDP
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_NOKIA_N800
......@@ -116,33 +111,33 @@ config MACH_NOKIA_N8X0
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBP
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_IGEP0020
bool "IGEP0020"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBP
config MACH_OMAP_4430SDP
......@@ -158,7 +153,7 @@ config OMAP3_EMU
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
depends on ARCH_OMAP3
default n
help
If you know that none of your system initiators will attempt to
......
......@@ -125,7 +125,7 @@ static struct map_desc omap243x_io_desc[] __initdata = {
#endif
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
......@@ -269,7 +269,7 @@ void __init omap243x_map_common_io()
}
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
void __init omap34xx_map_common_io()
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
......
......@@ -119,7 +119,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
#define OMAP2430_MCBSP_PDATA_SZ 0
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
.phys_base = OMAP34XX_MCBSP1_BASE,
......
......@@ -369,7 +369,7 @@ int __init omap2_mux_init(void)
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
......@@ -1018,5 +1018,5 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
return 0;
}
#endif /* CONFIG_ARCH_OMAP34XX */
#endif /* CONFIG_ARCH_OMAP3 */
......@@ -102,7 +102,7 @@ struct omap_board_mux {
u16 value;
};
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
/**
* omap_mux_init_gpio - initialize a signal based on the GPIO number
......
......@@ -12,7 +12,7 @@
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
......
......@@ -30,6 +30,7 @@ config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
select CPU_V7
select USB_ARCH_HAS_EHCI
config ARCH_OMAP4
bool "TI OMAP4"
......@@ -124,7 +125,7 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
......@@ -145,7 +146,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
......
......@@ -127,7 +127,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs)
#define omap2430_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
......
......@@ -178,11 +178,11 @@ struct gpio_bank {
u16 virtual_irq_start;
int method;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
......@@ -276,7 +276,7 @@ static struct gpio_bank gpio_bank_243x[5] = {
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
static struct gpio_bank gpio_bank_34xx[6] = {
{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
......@@ -426,7 +426,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
......@@ -493,7 +493,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
......@@ -546,7 +546,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_INPUT;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
......@@ -592,7 +592,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAOUT;
......@@ -684,7 +684,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
......@@ -856,7 +856,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
......@@ -937,7 +937,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP7XX_GPIO_INT_STATUS;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
......@@ -954,7 +954,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
__raw_writel(gpio_mask, reg);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
#endif
#if defined(CONFIG_ARCH_OMAP4)
......@@ -1008,7 +1008,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
......@@ -1077,7 +1077,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
......@@ -1131,7 +1131,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
......@@ -1227,7 +1227,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
......@@ -1286,7 +1286,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_7XX)
isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
......@@ -1766,7 +1766,7 @@ static int __init _omap_gpio_init(void)
gpio_bank = gpio_bank_243x;
}
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
if (cpu_is_omap34xx()) {
gpio_bank_count = OMAP34XX_NR_GPIOS;
gpio_bank = gpio_bank_34xx;
......@@ -1809,7 +1809,7 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 7xx has 32-bit GPIOs */
}
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
......@@ -1904,7 +1904,7 @@ static int __init _omap_gpio_init(void)
}
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
......@@ -1927,7 +1927,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
......@@ -1975,7 +1975,7 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
......@@ -2013,7 +2013,7 @@ static struct sys_device omap_gpio_device = {
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
......@@ -2030,7 +2030,7 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
......@@ -2045,7 +2045,7 @@ void omap2_gpio_prepare_for_retention(void)
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
......@@ -2074,7 +2074,7 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
......@@ -2113,7 +2113,7 @@ void omap2_gpio_resume_after_retention(void)
if (gen) {
u32 old0, old1;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | gen, bank->base +
......@@ -2144,7 +2144,7 @@ void omap2_gpio_resume_after_retention(void)
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
/* save the registers of bank 2-6 */
void omap_gpio_save_context(void)
{
......@@ -2241,7 +2241,7 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
......@@ -2301,7 +2301,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \
defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
......
......@@ -50,10 +50,10 @@ static const char name[] = "i2c_omap";
static struct resource i2c_resources[][2] = {
{ I2C_RESOURCE_BUILDER(0, 0) },
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP3)
{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
#endif
};
......@@ -72,10 +72,10 @@ static struct resource i2c_resources[][2] = {
static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP3)
I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
#endif
};
......
......@@ -114,7 +114,7 @@ unsigned int omap_rev(void);
# define OMAP_NAME omap16xx
# endif
#endif
#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX))
#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
# error "OMAP1 and OMAP2 can't be selected at the same time"
# endif
......@@ -241,7 +241,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# define cpu_is_omap242x() is_omap242x()
# define cpu_is_omap243x() is_omap243x()
# endif
# if defined(CONFIG_ARCH_OMAP34XX)
# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# undef cpu_is_omap343x
# define cpu_is_omap34xx() is_omap34xx()
......@@ -260,7 +260,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# undef cpu_is_omap243x
# define cpu_is_omap243x() 1
# endif
# if defined(CONFIG_ARCH_OMAP34XX)
# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# define cpu_is_omap34xx() 1
# endif
......@@ -385,7 +385,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap2430() is_omap2430()
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
# undef cpu_is_omap3503
# undef cpu_is_omap3515
......
......@@ -284,7 +284,7 @@ static inline void omap243x_map_common_io(void)
}
#endif
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
extern void omap34xx_map_common_io(void);
#else
static inline void omap34xx_map_common_io(void)
......
......@@ -103,7 +103,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
#define OMAP_MCBSP_REG_DRR2 0x00
......@@ -374,7 +374,7 @@ struct omap_mcbsp_platform_data {
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
u16 buffer_size;
#endif
};
......@@ -410,7 +410,7 @@ struct omap_mcbsp {
struct omap_mcbsp_platform_data *pdata;
struct clk *iclk;
struct clk *fclk;
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
......@@ -423,7 +423,7 @@ int omap_mcbsp_init(void);
void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
......
......@@ -21,8 +21,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_OMAP34XX_H
#define __ASM_ARCH_OMAP34XX_H
#ifndef __ASM_ARCH_OMAP3_H
#define __ASM_ARCH_OMAP3_H
/*
* Please place only base defines here and put the rest in device
......@@ -82,5 +82,5 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
#endif /* __ASM_ARCH_OMAP34XX_H */
#endif /* __ASM_ARCH_OMAP3_H */
......@@ -198,7 +198,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
}
EXPORT_SYMBOL(omap_mcbsp_config);
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
/*
* omap_mcbsp_set_tx_threshold configures how to deal
* with transmit threshold. the threshold value and handler can be
......@@ -1107,7 +1107,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
}
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
#ifdef CONFIG_ARCH_OMAP34XX
#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
......@@ -1246,7 +1246,7 @@ static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
#else
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
#endif /* CONFIG_ARCH_OMAP34XX */
#endif /* CONFIG_ARCH_OMAP3 */
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
......
......@@ -53,7 +53,7 @@
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
......
......@@ -42,7 +42,7 @@
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
#elif defined(CONFIG_ARCH_OMAP34XX)
#elif defined(CONFIG_ARCH_OMAP3)
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
......
......@@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE
config SPI_OMAP24XX
tristate "McSPI driver for OMAP24xx/OMAP34xx"
depends on ARCH_OMAP2 || ARCH_OMAP34XX
depends on ARCH_OMAP2 || ARCH_OMAP3
help
SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
(McSPI) modules.
......