Commit 877d0310 authored by Nick Andrew's avatar Nick Andrew Committed by Jiri Kosina
Browse files

trivial: Fix misspelling of firmware



Fix misspelling of firmware.
Signed-off-by: default avatarNick Andrew <nick@nick-andrew.net>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent caa790ba
......@@ -42,7 +42,7 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
you can get the firmware's binary in the directory of efi-vfirmware.hg/binaries.
(3) Rename the firware you owned to Flash.fd, and copy it to /usr/local/share/qemu
(3) Rename the firmware you owned to Flash.fd, and copy it to /usr/local/share/qemu
4. Boot up Linux or Windows guests:
4.1 Create or install a image for guest boot. If you have xen experience, it should be easy.
......
* Uploaded QE firmware
If a new firwmare has been uploaded to the QE (usually by the
If a new firmware has been uploaded to the QE (usually by the
boot loader), then a 'firmware' child node should be added to the QE
node. This node provides information on the uploaded firmware that
device drivers may need.
......
......@@ -221,7 +221,7 @@ static void __init ip27_smp_setup(void)
* Assumption to be fixed: we're always booted on logical / physical
* processor 0. While we're always running on logical processor 0
* this still means this is physical processor zero; it might for
* example be disabled in the firwware.
* example be disabled in the firmware.
*/
alloc_cpupda(0, 0);
}
......
......@@ -686,7 +686,7 @@ tlb_fixup_done:
* point.
*
* There used to be enormous complexity wrt. transferring
* over from the firwmare's trap table to the Linux kernel's.
* over from the firmware's trap table to the Linux kernel's.
* For example, there was a chicken & egg problem wrt. building
* the OBP page tables, yet needing to be on the Linux kernel
* trap table (to translate PAGE_OFFSET addresses) in order to
......
......@@ -2299,7 +2299,7 @@ static int sbmac_init(struct platform_device *pldev, long long base)
eaddr = sc->sbm_hwaddr;
/*
* Read the ethernet address. The firwmare left this programmed
* Read the ethernet address. The firmware left this programmed
* for us in the ethernet address register for each mac.
*/
......
......@@ -11225,7 +11225,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
return tg3_phy_init(tp);
/* Reading the PHY ID register can conflict with ASF
* firwmare access to the PHY hardware.
* firmware access to the PHY hardware.
*/
err = 0;
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
......
......@@ -2362,7 +2362,7 @@ static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
i * sizeof(struct ipw2100_status));
#ifdef IPW2100_DEBUG_C3
/* Halt the fimrware so we can get a good image */
/* Halt the firmware so we can get a good image */
write_register(priv->net_dev, IPW_REG_RESET_REG,
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
j = 5;
......
......@@ -8844,7 +8844,7 @@ static int ipw_wx_set_mode(struct net_device *dev,
#endif /* CONFIG_IPW2200_MONITOR */
/* Free the existing firmware and reset the fw_loaded
* flag so ipw_load() will bring in the new firmawre */
* flag so ipw_load() will bring in the new firmware */
free_firmware();
priv->ieee->iw_mode = wrqu->mode;
......
......@@ -1337,7 +1337,7 @@ static int iwl_read_ucode(struct iwl_priv *priv)
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
* on the API version read from firware header from here on forward */
* on the API version read from firmware header from here on forward */
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv, "Driver unable to support your firmware API. "
......
......@@ -2562,7 +2562,7 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
* on the API version read from firware header from here on forward */
* on the API version read from firmware header from here on forward */
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv, "Driver unable to support your firmware API. "
......
......@@ -1649,7 +1649,7 @@ static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv)
/**
* @brief This function executes next command in command
* pending queue. It will put fimware back to PS mode
* pending queue. It will put firmware back to PS mode
* if applicable.
*
* @param priv A pointer to struct lbs_private structure
......
......@@ -550,7 +550,7 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
* Transition a device to a new power state, using the platform formware and/or
* Transition a device to a new power state, using the platform firmware and/or
* the device's PCI PM registers.
*
* RETURN VALUE:
......
......@@ -5811,7 +5811,7 @@ static struct ibm_struct volume_driver_data = {
* ThinkPads from this same time period (and earlier) probably lack the
* tachometer as well.
*
* Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
* Unfortunately a lot of ThinkPads with new-style ECs but whose firmware
* was never fixed by IBM to report the EC firmware version string
* probably support the tachometer (like the early X models), so
* detecting it is quite hard. We need more data to know for sure.
......
......@@ -152,7 +152,7 @@ u16_t zfHpInit(zdev_t* dev, u32_t frequency)
else
{
#ifndef ZM_OTUS_LINUX_PHASE_2
/* donwload the normal frimware */
/* download the normal firmware */
if ((ret = zfFirmwareDownload(dev, (u32_t*)zcFwImage,
(u32_t)zcFwImageSize, ZM_FIRMWARE_WLAN_ADDR)) != ZM_SUCCESS)
{
......
......@@ -626,7 +626,7 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte
goto err_fw_corrupted;
/*
* Start to upload formware : send reset
* Start to upload firmware : send reset
*/
value = 1;
ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value);
......
......@@ -715,7 +715,7 @@ io_edgeport.c Change Log comments:
0.2 (01/30/2000) greg kroah-hartman
Milestone 1 release.
Device is found by USB subsystem, enumerated, fimware is downloaded
Device is found by USB subsystem, enumerated, firmware is downloaded
and the descriptors are printed to the debug log, config is set, and
green light starts to blink. Open port works, and data can be sent
and received at the default settings of the UART. Loopback connector
......
......@@ -379,7 +379,7 @@ enum {
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
/* DMA mask for user DMA control: User visible values; DO NOT
......
......@@ -265,7 +265,7 @@ static int create_image(int platform_mode)
* hibernation_snapshot - quiesce devices and create the hibernation
* snapshot image.
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform frimware for the power transition.
* prepare the platform firmware for the power transition.
*
* Must be called with pm_mutex held
*/
......@@ -378,7 +378,7 @@ static int resume_target_kernel(void)
* hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot()
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform frimware for the transition.
* prepare the platform firmware for the transition.
*
* Must be called with pm_mutex held
*/
......
......@@ -46,7 +46,7 @@
* load the driver as it did in previous versions.
* 04-07-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
* Added module parameter pss_firmware to allow the user to tell
* the driver where the fireware file is located. The default
* the driver where the firmware file is located. The default
* setting is the previous hardcoded setting "/etc/sound/pss_synth".
* 00-03-03: Christoph Hellwig <chhellwig@infradead.org>
* Adapted to module_init/module_exit
......
......@@ -565,7 +565,7 @@ static int load_aica_firmware(void)
err = request_firmware(&fw_entry, "aica_firmware.bin", &pd->dev);
if (unlikely(err))
return err;
/* write firware into memory */
/* write firmware into memory */
spu_disable();
spu_memload(0, fw_entry->data, fw_entry->size);
spu_enable();
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment