Commit 85f8d3e5 authored by Ray Copeland's avatar Ray Copeland Committed by Jean Delvare
Browse files

hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT



The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the 
for loops that use this as a limit count are of the typical form, "for 
(n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages 
w/o missing the last one it is necessary for the count to be one greater 
than it is.  (Specifically, you will miss the +1.5V 3GPIO input with count 
= 12 vs. 13.)
Signed-off-by: default avatarRay Copeland <ray.copeland@aprius.com>
Acked-by: default avatar"Darrick J. Wong" <djwong@us.ibm.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
parent fc76be43
......@@ -179,7 +179,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
*
* Some, but not all, of these voltages have low/high limits.
*/
#define ADT7462_VOLT_COUNT 12
#define ADT7462_VOLT_COUNT 13
#define ADT7462_VENDOR 0x41
#define ADT7462_DEVICE 0x62
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment