Commit 77a5a664 authored by Rajkumar Manoharan's avatar Rajkumar Manoharan Committed by John W. Linville
Browse files

ath9k_hw: Add support to reuse Carrier leak calibration



This patch adds support to reuse Carrier leak calibration
during fast channel change for AR9480 chips.
Signed-off-by: default avatarRajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 34013524
......@@ -905,8 +905,23 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_cal_data *caldata = ah->caldata;
bool txiqcal_done = false;
bool is_reusable = true;
bool txiqcal_done = false, txclcal_done = false;
bool is_reusable = true, txclcal_enabled;
u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0,
AR_PHY_CL_TAB_1,
AR_PHY_CL_TAB_2 };
txclcal_enabled = !!(REG_READ(ah, AR_PHY_CL_CAL_CTL) &
AR_PHY_CL_CAL_ENABLE);
if (txclcal_enabled) {
if (caldata && caldata->done_txclcal_once)
REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL,
AR_PHY_CL_CAL_ENABLE);
else
REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL,
AR_PHY_CL_CAL_ENABLE);
}
/* Do Tx IQ Calibration */
REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
......@@ -950,6 +965,33 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
else if (caldata && caldata->done_txiqcal_once)
ar9003_hw_tx_iq_cal_reload(ah);
#define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j))
if (caldata && txclcal_enabled) {
int i, j;
txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) &
AR_PHY_AGC_CONTROL_CLC_SUCCESS);
if (caldata->done_txclcal_once) {
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->txchainmask & (1 << i)))
continue;
for (j = 0; j < MAX_CL_TAB_ENTRY; j++)
REG_WRITE(ah, CL_TAB_ENTRY(cl_idx[i]),
caldata->tx_clcal[i][j]);
}
} else if (is_reusable && txclcal_done) {
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->txchainmask & (1 << i)))
continue;
for (j = 0; j < MAX_CL_TAB_ENTRY; j++)
caldata->tx_clcal[i][j] =
REG_READ(ah,
CL_TAB_ENTRY(cl_idx[i]));
}
caldata->done_txclcal_once = true;
}
}
#undef CL_TAB_ENTRY
ath9k_hw_loadnf(ah, chan);
ath9k_hw_start_nfcal(ah, true);
......
......@@ -1707,8 +1707,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_init_bb(ah, chan);
if (caldata)
if (caldata) {
caldata->done_txiqcal_once = false;
caldata->done_txclcal_once = false;
}
if (!ath9k_hw_init_cal(ah, chan))
return -EIO;
......
......@@ -338,6 +338,7 @@ enum ath9k_int {
CHANNEL_HT40MINUS)
#define MAX_IQCAL_MEASUREMENT 8
#define MAX_CL_TAB_ENTRY 16
struct ath9k_hw_cal_data {
u16 channel;
......@@ -349,10 +350,12 @@ struct ath9k_hw_cal_data {
bool nfcal_pending;
bool nfcal_interference;
bool done_txiqcal_once;
bool done_txclcal_once;
u16 small_signal_gain[AR9300_MAX_CHAINS];
u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ];
u32 num_measures[AR9300_MAX_CHAINS];
int tx_corr_coeff[MAX_IQCAL_MEASUREMENT][AR9300_MAX_CHAINS];
u32 tx_clcal[AR9300_MAX_CHAINS][MAX_CL_TAB_ENTRY];
struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment