Commit 75ca88c9 authored by Christian Lamparter's avatar Christian Lamparter Committed by John W. Linville

ar9170: update Makefile, Kconfig and MAINTAINERS

This patch update all necessary Makefile and Kconfig files.

Now you can then enable ar9170 in the kernel configuration under:
Device Drivers --->
	[*] Network device support --->
		Wireless LAN --->
			[*] Wireless LAN (IEEE 802.11)
			<M>   Atheros AR9170 support
			<M>     Atheros AR9170 USB support
Signed-off-by: default avatarChristian Lamparter <chunkeey@web.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b63a2cb3
......@@ -765,6 +765,14 @@ L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
S: Supported
ATHEROS AR9170 WIRELESS DRIVER
P: Christian Lamparter
M: chunkeey@web.de
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
F: drivers/net/wireless/ar9170/
ATI_REMOTE2 DRIVER
P: Ville Syrjala
M: syrjala@sci.fi
......
......@@ -485,6 +485,7 @@ config MWL8K
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/ath5k/Kconfig"
source "drivers/net/wireless/ath9k/Kconfig"
source "drivers/net/wireless/ar9170/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
......
......@@ -57,5 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_ATH5K) += ath5k/
obj-$(CONFIG_ATH9K) += ath9k/
obj-$(CONFIG_AR9170_COMMON) += ar9170/
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
config AR9170_COMMON
tristate "Atheros AR9170 support"
depends on WLAN_80211 && MAC80211 && EXPERIMENTAL
help
This is common code for AR9170 based devices.
This module does nothing by itself - the USB/(SPI) frontends
also need to be enabled in order to support any devices.
Say Y if you have the hardware, or M to build a module called
ar9170common.
config AR9170_USB
tristate "Atheros AR9170 USB support"
depends on AR9170_COMMON && USB
select FW_LOADER
help
This is a driver for the Atheros "otus" 802.11n USB devices.
These devices require additional firmware (2 files).
For now, these files can be downloaded from here:
http://wireless.kernel.org/en/users/Drivers/ar9170
If you choose to build a module, it'll be called ar9170usb.
config AR9170_LEDS
bool
depends on AR9170_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_COMMON)
default y
ar9170common-objs += main.o cmd.o mac.o phy.o led.o
ar9170usb-objs += usb.o
obj-$(CONFIG_AR9170_COMMON) += ar9170common.o
obj-$(CONFIG_AR9170_USB) += ar9170usb.o
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment