Commit 70f23fd6 authored by Justin P. Mattock's avatar Justin P. Mattock Committed by Jiri Kosina
Browse files

treewide: fix a few typos in comments



- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss
Signed-off-by: default avatarJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent c719864f
......@@ -127,7 +127,7 @@ Nintendo Wii device tree
- reg : should contain the SDHCI registers location and length
- interrupts : should contain the SDHCI interrupt
1.j) The Inter-Processsor Communication (IPC) node
1.j) The Inter-Processor Communication (IPC) node
Represent the Inter-Processor Communication interface. This interface
enables communications between the Broadway and the Starlet processors.
......
......@@ -226,7 +226,7 @@ Who: Zhang Rui <rui.zhang@intel.com>
What: CONFIG_ACPI_PROCFS_POWER
When: 2.6.39
Why: sysfs I/F for ACPI power devices, including AC and Battery,
has been working in upstream kenrel since 2.6.24, Sep 2007.
has been working in upstream kernel since 2.6.24, Sep 2007.
In 2.6.37, we make the sysfs I/F always built in and this option
disabled by default.
Remove this option and the ACPI power procfs interface in 2.6.39.
......
......@@ -55,7 +55,7 @@
#include "msm_iomap-8960.h"
/* Virtual addressses shared across all MSM targets. */
/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)
#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000)
......
......@@ -236,7 +236,7 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
/* 36xx-only RTA - Retention till Accesss control registers and bits */
/* 36xx-only RTA - Retention till Access control registers and bits */
#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
#define OMAP36XX_RTA_DISABLE 0x0
......
......@@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
/*
** Address does not fall w/in IOVA, must be bypassing
*/
DBG_BYPASS("sba_unmap_single_atttrs() bypass addr: 0x%lx\n",
DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n",
iova);
#ifdef ENABLE_MARK_CLEAN
......
......@@ -22,7 +22,7 @@
#define _PAGE_HASHPTE _PAGE_HPTE_SUB
/* Note the full page bits must be in the same location as for normal
* 4k pages as the same asssembly will be used to insert 64K pages
* 4k pages as the same assembly will be used to insert 64K pages
* wether the kernel has CONFIG_PPC_64K_PAGES or not
*/
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
......
......@@ -142,7 +142,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
return 0;
/*
* On Book E and perhaps other processsors, singlestep is handled on
* On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
* to fail, since it it locates the thread_info by masking off
* the low bits of the current stack pointer. We work around
......
......@@ -36,7 +36,7 @@ int __init pci_xen_swiotlb_detect(void)
/* If running as PV guest, either iommu=soft, or swiotlb=force will
* activate this IOMMU. If running as PV privileged, activate it
* irregardlesss.
* irregardless.
*/
if ((xen_initial_domain() || swiotlb || swiotlb_force) &&
(xen_pv_domain()))
......
......@@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc")
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
/*
* Strings used to decode resource descriptors.
* Used by both the disasssembler and the debugger resource dump routines
* Used by both the disassembler and the debugger resource dump routines
*/
const char *acpi_gbl_bm_decode[] = {
"NotBusMaster",
......
......@@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSDOWN;
break;
case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */
case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
......
......@@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf)
/*
* Generic read/write functions that call the specific functions of
* the atttributes...
* the attributes...
*/
static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
......
......@@ -44,11 +44,11 @@
* TODO: - Check MPU structure version/signature
* - Add things like /sbin/overtemp for non-critical
* overtemp conditions so userland can take some policy
* decisions, like slewing down CPUs
* decisions, like slowing down CPUs
* - Deal with fan and i2c failures in a better way
* - Maybe do a generic PID based on params used for
* U3 and Drives ? Definitely need to factor code a bit
* bettter... also make sensor detection more robust using
* better... also make sensor detection more robust using
* the device-tree to probe for them
* - Figure out how to get the slots consumption and set the
* slots fan accordingly
......
......@@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = {
{ 0x0f, KEY_BLUE }, /* bottom yellow button */
{ 0x14, KEY_AUDIO }, /* Snapshot */
{ 0x38, KEY_TV }, /* TV/Radio */
{ 0x0c, KEY_ESC } /* upper Red buttton */
{ 0x0c, KEY_ESC } /* upper Red button */
};
static struct rc_map_dvb_usb_table_table keys_tables[] = {
......
......@@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
MODULE_PARM_DESC(dolby, "Activates Dolby processing");
/* ---------------------------------------------------------------------- */
......
......@@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
}
}
/* Allocate some kenrel kernel buffers for copying
/* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
......
......@@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
}
}
/* Allocate some kenrel kernel buffers for copying
/* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
......
......@@ -110,7 +110,7 @@ V. Getting Logical Configuration Table
ENOBUFS Buffer not large enough. If this occurs, the required
buffer length is written into *(lct->reslen)
VI. Settting Parameters
VI. Setting Parameters
SYNOPSIS
......
......@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
u16 data_reg;
do {
/* Reading the messsage object from the Message RAM */
/* Reading the message object from the Message RAM */
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
......
......@@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
......
......@@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
* just settting the ownership bit of rxd in Each Rx
* just setting the ownership bit of rxd in Each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment