Commit 6b6db91c authored by Fry, Donald H's avatar Fry, Donald H Committed by John W. Linville
Browse files

iwlagn: remove the indirection for update_chain_flags



Not needed since the driver split.
Signed-off-by: default avatarDon Fry <donald.h.fry@intel.com>
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent bdfbf092
......@@ -171,7 +171,6 @@ static struct iwl_lib_ops iwl1000_lib = {
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl1000_nic_config,
......
......@@ -171,7 +171,6 @@ static struct iwl_lib_ops iwl2000_lib = {
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
......
......@@ -323,7 +323,6 @@ static struct iwl_lib_ops iwl5000_lib = {
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl5000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
......@@ -351,7 +350,6 @@ static struct iwl_lib_ops iwl5150_lib = {
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl5000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
......
......@@ -263,7 +263,6 @@ static struct iwl_lib_ops iwl6000_lib = {
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
......@@ -293,7 +292,6 @@ static struct iwl_lib_ops iwl6030_lib = {
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
......
......@@ -1001,8 +1001,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv)
/* Some power changes may have been made during the calibration.
* Update and commit the RXON
*/
if (priv->cfg->ops->lib->update_chain_flags)
priv->cfg->ops->lib->update_chain_flags(priv);
iwl_update_chain_flags(priv);
data->state = IWL_CHAIN_NOISE_DONE;
iwl_power_update_mode(priv, false);
......
......@@ -1724,8 +1724,7 @@ static void iwlagn_bt_traffic_change_work(struct work_struct *work)
if (test_bit(STATUS_SCAN_HW, &priv->status))
goto out;
if (priv->cfg->ops->lib->update_chain_flags)
priv->cfg->ops->lib->update_chain_flags(priv);
iwl_update_chain_flags(priv);
if (smps_request != -1) {
priv->current_ht_config.smps = smps_request;
......
......@@ -121,9 +121,6 @@ struct iwl_lib_ops {
/* power management */
struct iwl_apm_ops apm_ops;
/* power */
void (*update_chain_flags)(struct iwl_priv *priv);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
......
......@@ -406,9 +406,9 @@ int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
clear_bit(STATUS_POWER_PMI, &priv->status);
if (priv->cfg->ops->lib->update_chain_flags && update_chains)
priv->cfg->ops->lib->update_chain_flags(priv);
else if (priv->cfg->ops->lib->update_chain_flags)
if (update_chains)
iwl_update_chain_flags(priv);
else
IWL_DEBUG_POWER(priv,
"Cannot update the power, chain noise "
"calibration running: %d\n",
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment