Commit 6aa3524c authored by David Daney's avatar David Daney Committed by Ralf Baechle
Browse files

MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.



This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.
Signed-off-by: default avatarDavid Daney <ddaney@avtrex.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c
parent 8192c9ea
......@@ -12,6 +12,8 @@
#ifndef __ASM_CPU_INFO_H
#define __ASM_CPU_INFO_H
#include <linux/types.h>
#include <asm/cache.h>
/*
......@@ -69,6 +71,10 @@ struct cpuinfo_mips {
int tc_id; /* Thread Context number */
#endif
void *data; /* Additional data */
unsigned int watch_reg_count; /* Number that exist */
unsigned int watch_reg_use_cnt; /* Usable by ptrace */
#define NUM_WATCH_REGS 4
u16 watch_reg_masks[NUM_WATCH_REGS];
} __attribute__((aligned(SMP_CACHE_BYTES)));
extern struct cpuinfo_mips cpu_data[];
......
......@@ -105,6 +105,19 @@ struct mips_dsp_state {
{0,} \
}
struct mips3264_watch_reg_state {
/* The width of watchlo is 32 in a 32 bit kernel and 64 in a
64 bit kernel. We use unsigned long as it has the same
property. */
unsigned long watchlo[NUM_WATCH_REGS];
/* Only the mask and IRW bits from watchhi. */
u16 watchhi[NUM_WATCH_REGS];
};
union mips_watch_reg_state {
struct mips3264_watch_reg_state mips3264;
};
typedef struct {
unsigned long seg;
} mm_segment_t;
......@@ -137,6 +150,9 @@ struct thread_struct {
/* Saved state of the DSP ASE, if available. */
struct mips_dsp_state dsp;
/* Saved watch register state, if available. */
union mips_watch_reg_state watch;
/* Other stuff associated with the thread. */
unsigned long cp0_badvaddr; /* Last user fault */
unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
......@@ -192,6 +208,10 @@ struct thread_struct {
.dspr = {0, }, \
.dspcontrol = 0, \
}, \
/* \
* saved watch register stuff \
*/ \
.watch = {{{0,},},}, \
/* \
* Other stuff associated with the process \
*/ \
......
......@@ -124,6 +124,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */
#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */
#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
......@@ -140,6 +141,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
#define _TIF_32BIT_REGS (1<<TIF_32BIT_REGS)
#define _TIF_32BIT_ADDR (1<<TIF_32BIT_ADDR)
#define _TIF_FPUBOUND (1<<TIF_FPUBOUND)
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 David Daney
*/
#ifndef _ASM_WATCH_H
#define _ASM_WATCH_H
#include <linux/bitops.h>
#include <asm/mipsregs.h>
void mips_install_watch_registers(void);
void mips_read_watch_registers(void);
void mips_clear_watch_registers(void);
void mips_probe_watch_registers(struct cpuinfo_mips *c);
#ifdef CONFIG_HARDWARE_WATCHPOINTS
#define __restore_watch() do { \
if (unlikely(test_bit(TIF_LOAD_WATCH, \
&current_thread_info()->flags))) { \
mips_install_watch_registers(); \
} \
} while (0)
#else
#define __restore_watch() do {} while (0)
#endif
#endif /* _ASM_WATCH_H */
......@@ -6,7 +6,7 @@ extra-y := head.o init_task.o vmlinux.lds
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ptrace.o reset.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
time.o topology.o traps.o unaligned.o watch.o
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 David Daney
*/
#include <linux/sched.h>
#include <asm/processor.h>
#include <asm/watch.h>
/*
* Install the watch registers for the current thread. A maximum of
* four registers are installed although the machine may have more.
*/
void mips_install_watch_registers(void)
{
struct mips3264_watch_reg_state *watches =
&current->thread.watch.mips3264;
switch (current_cpu_data.watch_reg_use_cnt) {
default:
BUG();
case 4:
write_c0_watchlo3(watches->watchlo[3]);
/* Write 1 to the I, R, and W bits to clear them, and
1 to G so all ASIDs are trapped. */
write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
case 3:
write_c0_watchlo2(watches->watchlo[2]);
write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
case 2:
write_c0_watchlo1(watches->watchlo[1]);
write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
case 1:
write_c0_watchlo0(watches->watchlo[0]);
write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
}
}
/*
* Read back the watchhi registers so the user space debugger has
* access to the I, R, and W bits. A maximum of four registers are
* read although the machine may have more.
*/
void mips_read_watch_registers(void)
{
struct mips3264_watch_reg_state *watches =
&current->thread.watch.mips3264;
switch (current_cpu_data.watch_reg_use_cnt) {
default:
BUG();
case 4:
watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
case 3:
watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
case 2:
watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
case 1:
watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
}
if (current_cpu_data.watch_reg_use_cnt == 1 &&
(watches->watchhi[0] & 7) == 0) {
/* Pathological case of release 1 architecture that
* doesn't set the condition bits. We assume that
* since we got here, the watch condition was met and
* signal that the conditions requested in watchlo
* were met. */
watches->watchhi[0] |= (watches->watchlo[0] & 7);
}
}
/*
* Disable all watch registers. Although only four registers are
* installed, all are cleared to eliminate the possibility of endless
* looping in the watch handler.
*/
void mips_clear_watch_registers(void)
{
switch (current_cpu_data.watch_reg_count) {
default:
BUG();
case 8:
write_c0_watchlo7(0);
case 7:
write_c0_watchlo6(0);
case 6:
write_c0_watchlo5(0);
case 5:
write_c0_watchlo4(0);
case 4:
write_c0_watchlo3(0);
case 3:
write_c0_watchlo2(0);
case 2:
write_c0_watchlo1(0);
case 1:
write_c0_watchlo0(0);
}
}
__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
{
unsigned int t;
if ((c->options & MIPS_CPU_WATCH) == 0)
return;
/*
* Check which of the I,R and W bits are supported, then
* disable the register.
*/
write_c0_watchlo0(7);
t = read_c0_watchlo0();
write_c0_watchlo0(0);
c->watch_reg_masks[0] = t & 7;
/* Write the mask bits and read them back to determine which
* can be used. */
c->watch_reg_count = 1;
c->watch_reg_use_cnt = 1;
t = read_c0_watchhi0();
write_c0_watchhi0(t | 0xff8);
t = read_c0_watchhi0();
c->watch_reg_masks[0] |= (t & 0xff8);
if ((t & 0x80000000) == 0)
return;
write_c0_watchlo1(7);
t = read_c0_watchlo1();
write_c0_watchlo1(0);
c->watch_reg_masks[1] = t & 7;
c->watch_reg_count = 2;
c->watch_reg_use_cnt = 2;
t = read_c0_watchhi1();
write_c0_watchhi1(t | 0xff8);
t = read_c0_watchhi1();
c->watch_reg_masks[1] |= (t & 0xff8);
if ((t & 0x80000000) == 0)
return;
write_c0_watchlo2(7);
t = read_c0_watchlo2();
write_c0_watchlo2(0);
c->watch_reg_masks[2] = t & 7;
c->watch_reg_count = 3;
c->watch_reg_use_cnt = 3;
t = read_c0_watchhi2();
write_c0_watchhi2(t | 0xff8);
t = read_c0_watchhi2();
c->watch_reg_masks[2] |= (t & 0xff8);
if ((t & 0x80000000) == 0)
return;
write_c0_watchlo3(7);
t = read_c0_watchlo3();
write_c0_watchlo3(0);
c->watch_reg_masks[3] = t & 7;
c->watch_reg_count = 4;
c->watch_reg_use_cnt = 4;
t = read_c0_watchhi3();
write_c0_watchhi3(t | 0xff8);
t = read_c0_watchhi3();
c->watch_reg_masks[3] |= (t & 0xff8);
if ((t & 0x80000000) == 0)
return;
/* We use at most 4, but probe and report up to 8. */
c->watch_reg_count = 5;
t = read_c0_watchhi4();
if ((t & 0x80000000) == 0)
return;
c->watch_reg_count = 6;
t = read_c0_watchhi5();
if ((t & 0x80000000) == 0)
return;
c->watch_reg_count = 7;
t = read_c0_watchhi6();
if ((t & 0x80000000) == 0)
return;
c->watch_reg_count = 8;
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment