Commit 25047950 authored by Eliezer Tamir's avatar Eliezer Tamir Committed by David S. Miller
Browse files

[BNX2X]: Correct init_one()



Correct PCI-E info printed by init_one()
In one case it failed to free the netdev. 
Signed-off-by: default avatarEliezer Tamir <eliezert@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c14423fe
......@@ -8873,14 +8873,32 @@ err_out:
return rc;
}
static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp)
{
u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
return val;
}
/* return value of 1=2.5GHz 2=5GHz */
static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp)
{
u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
return val;
}
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int version_printed;
struct net_device *dev = NULL;
struct bnx2x *bp;
int rc, i;
int rc;
int port = PCI_FUNC(pdev->devfn);
DECLARE_MAC_BUF(mac);
if (version_printed++ == 0)
printk(KERN_INFO "%s", version);
......@@ -8897,6 +8915,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
if (port && onefunc) {
printk(KERN_ERR PFX "second function disabled. exiting\n");
free_netdev(dev);
return 0;
}
......@@ -8950,22 +8969,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
pci_set_drvdata(pdev, dev);
bp->name = board_info[ent->driver_data].name;
printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz "
"found at mem %lx, IRQ %d, ",
dev->name, bp->name,
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
" IRQ %d, ", dev->name, bp->name,
((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
((CHIP_ID(bp) & 0x0ff0) >> 4),
((bp->flags & PCIX_FLAG) ? "-X" : ""),
((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
bp->bus_speed_mhz,
dev->base_addr,
bp->pdev->irq);
printk("node addr ");
for (i = 0; i < 6; i++)
printk("%2.2x", dev->dev_addr[i]);
printk("\n");
bnx2x_get_pcie_width(bp),
(bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
dev->base_addr, bp->pdev->irq);
printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr));
return 0;
}
......
......@@ -867,6 +867,11 @@ struct bnx2x {
DPM_TRIGER_TYPE); \
} while (0)
/* PCIE link and speed */
#define PCICFG_LINK_WIDTH 0x1f00000
#define PCICFG_LINK_WIDTH_SHIFT 20
#define PCICFG_LINK_SPEED 0xf0000
#define PCICFG_LINK_SPEED_SHIFT 16
/* stuff added to make the code fit 80Col */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment