Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	include/net/tcp.h

drivers/net/bnx2.c

@@ -54,8 +54,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"2.0.0"
-#define DRV_MODULE_RELDATE	"April 2, 2009"
+#define DRV_MODULE_VERSION	"2.0.1"
+#define DRV_MODULE_RELDATE	"May 6, 2009"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-4.6.16.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-4.6.16.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-4.6.17.fw"
@@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_tx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
 		cons++;
 	return cons;
@@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_rx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
 		cons++;
 	return cons;

drivers/net/bonding/bond_alb.c

@@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave
  * Called with RTNL
  */
 int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
-	__releases(&bond->curr_slave_lock)
-	__releases(&bond->lock)
 	__acquires(&bond->lock)
-	__acquires(&bond->curr_slave_lock)
+	__releases(&bond->lock)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct sockaddr *sa = addr;
@@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 		}
 	}
 
-	write_unlock_bh(&bond->curr_slave_lock);
-	read_unlock(&bond->lock);
-
 	if (swap_slave) {
 		alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
 		alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
@@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 		alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
 				       bond->alb_info.rlb_enabled);
 
+		read_lock(&bond->lock);
 		alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
 		if (bond->alb_info.rlb_enabled) {
 			/* inform clients mac address has changed */
 			rlb_req_update_slave_clients(bond, bond->curr_active_slave);
 		}
+		read_unlock(&bond->lock);
 	}
 
-	read_lock(&bond->lock);
-	write_lock_bh(&bond->curr_slave_lock);
-
 	return 0;
 }
 

drivers/net/e1000/e1000_main.c

@@ -3741,7 +3741,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
+	if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is

drivers/net/ehea/ehea.h

@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0100"
+#define DRV_VERSION	"EHEA_0101"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1

drivers/net/ehea/ehea_main.c

@@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
 	x &= (arr_len - 1);
 
 	pref = skb_array[x];
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
-
-	pref = (skb_array[x]->data);
-	prefetch(pref);
-	prefetch(pref + EHEA_CACHE_LINE);
-	prefetch(pref + EHEA_CACHE_LINE * 2);
-	prefetch(pref + EHEA_CACHE_LINE * 3);
+	if (pref) {
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
+
+		pref = (skb_array[x]->data);
+		prefetch(pref);
+		prefetch(pref + EHEA_CACHE_LINE);
+		prefetch(pref + EHEA_CACHE_LINE * 2);
+		prefetch(pref + EHEA_CACHE_LINE * 3);
+	}
+
 	skb = skb_array[skb_index];
 	skb_array[skb_index] = NULL;
 	return skb;
@@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array,
 	x &= (arr_len - 1);
 
 	pref = skb_array[x];
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
+	if (pref) {
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
 
-	pref = (skb_array[x]->data);
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
+		pref = (skb_array[x]->data);
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
+	}
 
 	skb = skb_array[wqe_index];
 	skb_array[wqe_index] = NULL;

drivers/net/igb/igb_main.c

@@ -2010,7 +2010,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
 	u32 srrctl = 0;
-	int i, j;
+	int i;
 
 	rctl = rd32(E1000_RCTL);
 
@@ -2075,8 +2075,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	if (adapter->vfs_allocated_count) {
 		u32 vmolr;
 
-		j = adapter->rx_ring[0].reg_idx;
-
 		/* set all queue drop enable bits */
 		wr32(E1000_QDE, ALL_QUEUES);
 		srrctl |= E1000_SRRCTL_DROP_EN;
@@ -2084,16 +2082,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 		/* disable queue 0 to prevent tail write w/o re-config */
 		wr32(E1000_RXDCTL(0), 0);
 
-		vmolr = rd32(E1000_VMOLR(j));
+		vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
 		if (rctl & E1000_RCTL_LPE)
 			vmolr |= E1000_VMOLR_LPE;
-		if (adapter->num_rx_queues > 0)
+		if (adapter->num_rx_queues > 1)
 			vmolr |= E1000_VMOLR_RSSE;
-		wr32(E1000_VMOLR(j), vmolr);
+		wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
 	}
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		j = adapter->rx_ring[i].reg_idx;
+		int j = adapter->rx_ring[i].reg_idx;
 		wr32(E1000_SRRCTL(j), srrctl);
 	}
 

drivers/net/usb/Kconfig

@@ -180,6 +180,20 @@ config USB_NET_CDCETHER
 	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
 	  name is used instead.
 
+config USB_NET_CDC_EEM
+	tristate "CDC EEM support"
+	depends on USB_USBNET && EXPERIMENTAL
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Emulation Model, a specification that's easy to
+	  implement in device firmware.  The CDC EEM specifications are available
+	  from <http://www.usb.org/>.
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
 config USB_NET_DM9601
 	tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
 	depends on USB_USBNET

drivers/net/usb/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
 obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
 obj-$(CONFIG_USB_NET_SMSC95XX)	+= smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o

drivers/net/usb/cdc_eem.c

+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD	2		/* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+	dev_kfree_skb(urb->context);
+	usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct urb		*urb;
+	int			status;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto fail;
+
+	usb_fill_bulk_urb(urb, dev->udev, dev->out,
+			skb->data, skb->len, eem_linkcmd_complete, skb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		usb_free_urb(urb);
+fail:
+		dev_kfree_skb(skb);
+		devwarn(dev, "link cmd failure\n");
+		return;
+	}
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = 0;
+
+	status = usbnet_get_endpoints(dev, intf);
+	if (status < 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(driver_of(intf), intf);
+		return status;
+	}
+
+	/* no jumbogram (16K) support for now */
+
+	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+	return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	struct sk_buff	*skb2 = NULL;
+	u16		len = skb->len;
+	u32		crc = 0;
+	int		padlen = 0;
+
+	/* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+	 * zero, stick two bytes of zero length EEM packet on the end.
+	 * Else the framework would add invalid single byte padding,
+	 * since it can't know whether ZLPs will be handled right by
+	 * all the relevant hardware and software.
+	 */
+	if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+		padlen += 2;
+
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= ETH_FCS_LEN + padlen)
+				&& (headroom >= EEM_HEAD))
+			goto done;
+
+		if ((headroom + tailroom)
+				> (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+			skb->data = memmove(skb->head +
+					EEM_HEAD,
+					skb->data,
+					skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+done:
+	/* we don't use the "no Ethernet CRC" option */
+	crc = crc32_le(~0, skb->data, skb->len);
+	crc = ~crc;
+
+	put_unaligned_le32(crc, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (1 == valid Ethernet CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+	/* Bundle a zero length EEM packet if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.  But we
+	 * may have received multiple EEM payloads, or command payloads.
+	 * So we must process _everything_ as if it's a header, except
+	 * maybe the last data payload
+	 *
+	 * REVISIT the framework needs updating so that when we consume
+	 * all payloads (the last or only message was a command, or a
+	 * zero length EEM packet) that is not accounted as an rx_error.
+	 */
+	do {
+		struct sk_buff	*skb2 = NULL;
+		u16		header;
+		u16		len = 0;
+
+		/* incomplete EEM header? */
+		if (skb->len < EEM_HEAD)
+			return 0;
+
+		/*
+		 * EEM packet header format:
+		 * b0..14:	EEM type dependant (Data or Command)
+		 * b15:		bmType
+		 */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HEAD);
+
+		/*
+		 * The bmType bit helps to denote when EEM
+		 * packet is data or command :
+		 *	bmType = 0	: EEM data payload
+		 *	bmType = 1	: EEM (link) command
+		 */
+		if (header & BIT(15)) {
+			u16	bmEEMCmd;
+
+			/*
+			 * EEM (link) command packet:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		bmReserved (must be 0)
+			 * b15:		1 (EEM command)
+			 */
+			if (header & BIT(14)) {
+				devdbg(dev, "reserved command %04x\n", header);
+				continue;
+			}
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+
+			/* Responding to echo requests is mandatory. */
+			case 0:		/* Echo command */
+				len = header & 0x7FF;
+
+				/* bogus command? */
+				if (skb->len < len)
+					return 0;
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					goto next;
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | (1 << 11) | len,
+						skb_push(skb2, 2));
+				eem_linkcmd(dev, skb2);
+				break;
+
+			/*
+			 * Host may choose to ignore hints.
+			 *  - suspend: peripheral ready to suspend
+			 *  - response: suggest N millisec polling
+			 *  - response complete: suggest N sec polling
+			 */
+			case 2:		/* Suspend hint */
+			case 3:		/* Response hint */
+			case 4:		/* Response complete hint */
+				continue;
+
+			/*
+			 * Hosts should never receive host-to-peripheral
+			 * or reserved command codes; or responses to an
+			 * echo command we didn't send.
+			 */
+			case 1:		/* Echo response */
+			case 5:		/* Tickle */
+			default:	/* reserved */
+				devwarn(dev, "unexpected link command %d\n",
+						bmEEMCmd);
+				continue;
+			}
+
+		} else {
+			u32	crc, crc2;
+			int	is_last;
+
+			/* zero length EEM packet? */
+			if (header == 0)
+				continue;
+
+			/*
+			 * EEM data packet header :
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC
+			 * b15:		0 (EEM data)
+			 */
+			len = header & 0x3FFF;
+
+			/* bogus EEM payload? */
+			if (skb->len < len)
+				return 0;
+
+			/* bogus ethernet frame? */
+			if (len < (ETH_HLEN + ETH_FCS_LEN))
+				goto next;
+
+			/*
+			 * Treat the last payload differently: framework
+			 * code expects our "fixup" to have stripped off
+			 * headers, so "skb" is a data packet (or error).
+			 * Else if it's not the last payload, keep "skb"
+			 * for further processing.
+			 */
+			is_last = (len == skb->len);
+			if (is_last)
+				skb2 = skb;
+			else {
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					return 0;
+			}
+
+			crc = get_unaligned_le32(skb2->data
+					+ len - ETH_FCS_LEN);
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			/*
+			 * The bmCRC helps to denote when the CRC field in
+			 * the Ethernet frame contains a calculated CRC:
+			 *	bmCRC = 1	: CRC is calculated
+			 *	bmCRC = 0	: CRC = 0xDEADBEEF
+			 */
+			if (header & BIT(14))
+				crc2 = ~crc32_le(~0, skb2->data, len);
+			else
+				crc2 = 0xdeadbeef;
+
+			if (is_last)
+				return crc == crc2;
+
+			if (unlikely(crc != crc2)) {
+				dev->stats.rx_errors++;
+				dev_kfree_skb_any(skb2);
+			} else
+				usbnet_skb_return(dev, skb2);
+		}
+
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info eem_info = {
+	.description =	"CDC EEM Device",
+	.flags =	FLAG_ETHER,
+	.bind =		eem_bind,
+	.rx_fixup =	eem_rx_fixup,
+	.tx_fixup =	eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+			USB_CDC_PROTO_EEM),
+	.driver_info = (unsigned long) &eem_info,
+},
+{
+	/* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+	.name =		"cdc_eem",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+	return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+	usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");

drivers/net/wireless/iwlwifi/iwl-sta.c

@@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
 {
 	unsigned long flags;
 	int ret = 0;
+	__le16 key_flags = 0;
+
+	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags &= ~STA_KEY_FLG_INVALID;
+
+	if (sta_id == priv->hw_params.bcast_sta_id)
+		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
@@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
 	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 		"no space for a new key");
 
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+
+
 	/* This copy is acutally not needed: we get the key with each TX */
 	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
 
@@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 {
 	u8 sta_id = IWL_INVALID_STATION;
 	unsigned long flags;
-	__le16 key_flags = 0;
 	int i;
-	DECLARE_MAC_BUF(mac);
 
 	sta_id = priv->cfg->ops->smgmt->find_station(priv, addr);
 	if (sta_id == IWL_INVALID_STATION) {
@@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv,