Commit 1855256c authored by Jeff Garzik's avatar Jeff Garzik

drivers/firmware: const-ify DMI API and internals

Three main sets of changes:

1) dmi_get_system_info() return value should have been marked const,
   since callers should not be changing that data.

2) const-ify DMI internals, since DMI firmware tables should,
   whenever possible, be marked const to ensure we never ever write to
   that data area.

3) const-ify DMI API, to enable marking tables const where possible
   in low-level drivers.

And if we're really lucky, this might enable some additional
optimizations on the part of the compiler.

The bulk of the changes are #2 and #3, which are interrelated.  #1 could
have been a separate patch, but it was so small compared to the others,
it was easier to roll it into this changeset.
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent bbf25010
......@@ -907,7 +907,7 @@ static void __init acpi_process_madt(void)
#ifdef __i386__
static int __init disable_acpi_irq(struct dmi_system_id *d)
static int __init disable_acpi_irq(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
......@@ -917,7 +917,7 @@ static int __init disable_acpi_irq(struct dmi_system_id *d)
return 0;
}
static int __init disable_acpi_pci(struct dmi_system_id *d)
static int __init disable_acpi_pci(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
......@@ -927,7 +927,7 @@ static int __init disable_acpi_pci(struct dmi_system_id *d)
return 0;
}
static int __init dmi_disable_acpi(struct dmi_system_id *d)
static int __init dmi_disable_acpi(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
......@@ -942,7 +942,7 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d)
/*
* Limit ACPI to CPU enumeration for HT
*/
static int __init force_acpi_ht(struct dmi_system_id *d)
static int __init force_acpi_ht(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
......
......@@ -84,7 +84,7 @@ __setup("acpi_sleep=", acpi_sleep_setup);
/* Ouch, we want to delete this. We already have better version in userspace, in
s2ram from suspend.sf.net project */
static __init int reset_videomode_after_s3(struct dmi_system_id *d)
static __init int reset_videomode_after_s3(const struct dmi_system_id *d)
{
acpi_realmode_flags |= 2;
return 0;
......
......@@ -1869,7 +1869,7 @@ static struct miscdevice apm_device = {
/* Simple "print if true" callback */
static int __init print_if_true(struct dmi_system_id *d)
static int __init print_if_true(const struct dmi_system_id *d)
{
printk("%s\n", d->ident);
return 0;
......@@ -1879,14 +1879,14 @@ static int __init print_if_true(struct dmi_system_id *d)
* Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was
* disabled before the suspend. Linux used to get terribly confused by that.
*/
static int __init broken_ps2_resume(struct dmi_system_id *d)
static int __init broken_ps2_resume(const struct dmi_system_id *d)
{
printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident);
return 0;
}
/* Some bioses have a broken protected mode poweroff and need to use realmode */
static int __init set_realmode_power_off(struct dmi_system_id *d)
static int __init set_realmode_power_off(const struct dmi_system_id *d)
{
if (apm_info.realmode_power_off == 0) {
apm_info.realmode_power_off = 1;
......@@ -1896,7 +1896,7 @@ static int __init set_realmode_power_off(struct dmi_system_id *d)
}
/* Some laptops require interrupts to be enabled during APM calls */
static int __init set_apm_ints(struct dmi_system_id *d)
static int __init set_apm_ints(const struct dmi_system_id *d)
{
if (apm_info.allow_ints == 0) {
apm_info.allow_ints = 1;
......@@ -1906,7 +1906,7 @@ static int __init set_apm_ints(struct dmi_system_id *d)
}
/* Some APM bioses corrupt memory or just plain do not work */
static int __init apm_is_horked(struct dmi_system_id *d)
static int __init apm_is_horked(const struct dmi_system_id *d)
{
if (apm_info.disabled == 0) {
apm_info.disabled = 1;
......@@ -1915,7 +1915,7 @@ static int __init apm_is_horked(struct dmi_system_id *d)
return 0;
}
static int __init apm_is_horked_d850md(struct dmi_system_id *d)
static int __init apm_is_horked_d850md(const struct dmi_system_id *d)
{
if (apm_info.disabled == 0) {
apm_info.disabled = 1;
......@@ -1927,7 +1927,7 @@ static int __init apm_is_horked_d850md(struct dmi_system_id *d)
}
/* Some APM bioses hang on APM idle calls */
static int __init apm_likes_to_melt(struct dmi_system_id *d)
static int __init apm_likes_to_melt(const struct dmi_system_id *d)
{
if (apm_info.forbid_idle == 0) {
apm_info.forbid_idle = 1;
......@@ -1951,7 +1951,7 @@ static int __init apm_likes_to_melt(struct dmi_system_id *d)
* Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e)
* Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000)
*/
static int __init broken_apm_power(struct dmi_system_id *d)
static int __init broken_apm_power(const struct dmi_system_id *d)
{
apm_info.get_power_status_broken = 1;
printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n");
......@@ -1962,7 +1962,7 @@ static int __init broken_apm_power(struct dmi_system_id *d)
* This bios swaps the APM minute reporting bytes over (Many sony laptops
* have this problem).
*/
static int __init swab_apm_power_in_minutes(struct dmi_system_id *d)
static int __init swab_apm_power_in_minutes(const struct dmi_system_id *d)
{
apm_info.get_power_status_swabinminutes = 1;
printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n");
......
......@@ -533,13 +533,13 @@ static int __init acpi_cpufreq_early_init(void)
*/
static int bios_with_sw_any_bug;
static int sw_any_bug_found(struct dmi_system_id *d)
static int sw_any_bug_found(const struct dmi_system_id *d)
{
bios_with_sw_any_bug = 1;
return 0;
}
static struct dmi_system_id sw_any_bug_dmi_table[] = {
static const struct dmi_system_id sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
.ident = "Supermicro Server X6DLP",
......
......@@ -79,7 +79,7 @@ __setup("reboot=", reboot_setup);
/*
* Some machines require the "reboot=b" commandline option, this quirk makes that automatic.
*/
static int __init set_bios_reboot(struct dmi_system_id *d)
static int __init set_bios_reboot(const struct dmi_system_id *d)
{
if (!reboot_thru_bios) {
reboot_thru_bios = 1;
......
......@@ -305,7 +305,7 @@ void mark_tsc_unstable(char *reason)
}
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d)
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
d->ident);
......
......@@ -21,7 +21,7 @@
static int dmi_bigsmp; /* can be set by dmi scanners */
static int hp_ht_bigsmp(struct dmi_system_id *d)
static int hp_ht_bigsmp(const struct dmi_system_id *d)
{
#ifdef CONFIG_X86_GENERICARCH
printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
......@@ -31,7 +31,7 @@ static int hp_ht_bigsmp(struct dmi_system_id *d)
}
static struct dmi_system_id bigsmp_dmi_table[] = {
static const struct dmi_system_id bigsmp_dmi_table[] = {
{ hp_ht_bigsmp, "HP ProLiant DL760 G2", {
DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
......
......@@ -123,7 +123,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b)
* on the kernel command line (which was parsed earlier).
*/
static int __devinit set_bf_sort(struct dmi_system_id *d)
static int __devinit set_bf_sort(const struct dmi_system_id *d)
{
if (pci_bf_sort == pci_bf_sort_default) {
pci_bf_sort = pci_dmi_bf;
......@@ -136,7 +136,7 @@ static int __devinit set_bf_sort(struct dmi_system_id *d)
* Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
*/
#ifdef __i386__
static int __devinit assign_all_busses(struct dmi_system_id *d)
static int __devinit assign_all_busses(const struct dmi_system_id *d)
{
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
......
......@@ -1010,7 +1010,7 @@ static void __init pcibios_fixup_irqs(void)
* Work around broken HP Pavilion Notebooks which assign USB to
* IRQ 9 even though it is actually wired to IRQ 11
*/
static int __init fix_broken_hp_bios_irq9(struct dmi_system_id *d)
static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
{
if (!broken_hp_bios_irq9) {
broken_hp_bios_irq9 = 1;
......@@ -1023,7 +1023,7 @@ static int __init fix_broken_hp_bios_irq9(struct dmi_system_id *d)
* Work around broken Acer TravelMate 360 Notebooks which assign
* Cardbus to IRQ 11 even though it is actually wired to IRQ 10
*/
static int __init fix_acer_tm360_irqrouting(struct dmi_system_id *d)
static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
{
if (!acer_tm360_irqrouting) {
acer_tm360_irqrouting = 1;
......
......@@ -1214,7 +1214,7 @@ acpi_os_validate_address (
}
#ifdef CONFIG_DMI
static int dmi_osi_linux(struct dmi_system_id *d)
static int dmi_osi_linux(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: enabling _OSI(Linux)\n", d->ident);
enable_osi_linux(1);
......
......@@ -92,7 +92,7 @@ module_param(bm_history, uint, 0644);
*
* To skip this limit, boot/load with a large max_cstate limit.
*/
static int set_max_cstate(struct dmi_system_id *id)
static int set_max_cstate(const struct dmi_system_id *id)
{
if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
return 0;
......
......@@ -215,7 +215,7 @@ static struct pm_ops acpi_pm_ops = {
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.
*/
static int __init init_ints_after_s1(struct dmi_system_id *d)
static int __init init_ints_after_s1(const struct dmi_system_id *d)
{
printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
init_8259A_after_S1 = 1;
......
......@@ -1360,7 +1360,7 @@ static int acpi_thermal_resume(struct acpi_device *device)
}
#ifdef CONFIG_DMI
static int thermal_act(struct dmi_system_id *d) {
static int thermal_act(const struct dmi_system_id *d) {
if (act == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
......@@ -1369,14 +1369,14 @@ static int thermal_act(struct dmi_system_id *d) {
}
return 0;
}
static int thermal_nocrt(struct dmi_system_id *d) {
static int thermal_nocrt(const struct dmi_system_id *d) {
printk(KERN_NOTICE "ACPI: %s detected: "
"disabling all critical thermal trip point actions.\n", d->ident);
nocrt = 1;
return 0;
}
static int thermal_tzp(struct dmi_system_id *d) {
static int thermal_tzp(const struct dmi_system_id *d) {
if (tzp == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
......@@ -1385,7 +1385,7 @@ static int thermal_tzp(struct dmi_system_id *d) {
}
return 0;
}
static int thermal_psv(struct dmi_system_id *d) {
static int thermal_psv(const struct dmi_system_id *d) {
if (psv == 0) {
printk(KERN_NOTICE "ACPI: %s detected: "
......
......@@ -919,7 +919,7 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
static struct dmi_system_id sysids[] = {
static const struct dmi_system_id sysids[] = {
{
.ident = "TECRA M3",
.matches = {
......@@ -1183,7 +1183,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
{
static struct dmi_system_id sysids[] = {
static const struct dmi_system_id sysids[] = {
{
/* Clevo M570U sets IOCFG bit 18 if the cdrom
* isn't used to boot the system which
......
......@@ -40,7 +40,7 @@
* Cable special cases
*/
static struct dmi_system_id cable_dmi_table[] = {
static const struct dmi_system_id cable_dmi_table[] = {
{
.ident = "HP Pavilion N5430",
.matches = {
......
......@@ -214,7 +214,7 @@ static struct ata_port_operations cs5530_port_ops = {
.port_start = ata_port_start,
};
static struct dmi_system_id palmax_dmi_table[] = {
static const struct dmi_system_id palmax_dmi_table[] = {
{
.ident = "Palmax PD1100",
.matches = {
......
......@@ -129,7 +129,7 @@ static const struct via_isa_bridge {
* Cable special cases
*/
static struct dmi_system_id cable_dmi_table[] = {
static const struct dmi_system_id cable_dmi_table[] = {
{
.ident = "Acer Ferrari 3400",
.matches = {
......
......@@ -98,9 +98,9 @@ struct smm_regs {
unsigned int edi __attribute__ ((packed));
};
static inline char *i8k_get_dmi_data(int field)
static inline const char *i8k_get_dmi_data(int field)
{
char *dmi_data = dmi_get_system_info(field);
const char *dmi_data = dmi_get_system_info(field);
return dmi_data && *dmi_data ? dmi_data : "?";
}
......
......@@ -1965,10 +1965,10 @@ struct dmi_ipmi_data
u8 slave_addr;
};
static int __devinit decode_dmi(struct dmi_header *dm,
static int __devinit decode_dmi(const struct dmi_header *dm,
struct dmi_ipmi_data *dmi)
{
u8 *data = (u8 *)dm;
const u8 *data = (const u8 *)dm;
unsigned long base_addr;
u8 reg_spacing;
u8 len = dm->length;
......@@ -2091,13 +2091,14 @@ static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
static void __devinit dmi_find_bmc(void)
{
struct dmi_device *dev = NULL;
const struct dmi_device *dev = NULL;
struct dmi_ipmi_data data;
int rv;
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
memset(&data, 0, sizeof(data));
rv = decode_dmi((struct dmi_header *) dev->device_data, &data);
rv = decode_dmi((const struct dmi_header *) dev->device_data,
&data);
if (!rv)
try_init_dmi(&data);
}
......
......@@ -8,9 +8,9 @@
#include <linux/slab.h>
#include <asm/dmi.h>
static char * __init dmi_string(struct dmi_header *dm, u8 s)
static char * __init dmi_string(const struct dmi_header *dm, u8 s)
{
u8 *bp = ((u8 *) dm) + dm->length;
const u8 *bp = ((u8 *) dm) + dm->length;
char *str = "";
if (s) {
......@@ -37,7 +37,7 @@ static char * __init dmi_string(struct dmi_header *dm, u8 s)
* pointing to completely the wrong place for example
*/
static int __init dmi_table(u32 base, int len, int num,
void (*decode)(struct dmi_header *))
void (*decode)(const struct dmi_header *))
{
u8 *buf, *data;
int i = 0;
......@@ -53,7 +53,8 @@ static int __init dmi_table(u32 base, int len, int num,
* OR we run off the end of the table (also happens)
*/
while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
struct dmi_header *dm = (struct dmi_header *)data;
const struct dmi_header *dm = (const struct dmi_header *)data;
/*
* We want to know the total length (formated area and strings)
* before decoding to make sure we won't run off the table in
......@@ -71,7 +72,7 @@ static int __init dmi_table(u32 base, int len, int num,
return 0;
}
static int __init dmi_checksum(u8 *buf)
static int __init dmi_checksum(const u8 *buf)
{
u8 sum = 0;
int a;
......@@ -89,9 +90,10 @@ int dmi_available;
/*
* Save a DMI string
*/
static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
static void __init dmi_save_ident(const struct dmi_header *dm, int slot, int string)
{
char *p, *d = (char*) dm;
const char *d = (const char*) dm;
char *p;
if (dmi_ident[slot])
return;
......@@ -103,9 +105,9 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
dmi_ident[slot] = p;
}
static void __init dmi_save_uuid(struct dmi_header *dm, int slot, int index)
static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, int index)
{
u8 *d = (u8*) dm + index;
const u8 *d = (u8*) dm + index;
char *s;
int is_ff = 1, is_00 = 1, i;
......@@ -132,9 +134,9 @@ static void __init dmi_save_uuid(struct dmi_header *dm, int slot, int index)
dmi_ident[slot] = s;
}
static void __init dmi_save_type(struct dmi_header *dm, int slot, int index)
static void __init dmi_save_type(const struct dmi_header *dm, int slot, int index)
{
u8 *d = (u8*) dm + index;
const u8 *d = (u8*) dm + index;
char *s;
if (dmi_ident[slot])
......@@ -148,13 +150,13 @@ static void __init dmi_save_type(struct dmi_header *dm, int slot, int index)
dmi_ident[slot] = s;
}
static void __init dmi_save_devices(struct dmi_header *dm)
static void __init dmi_save_devices(const struct dmi_header *dm)
{
int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
struct dmi_device *dev;
for (i = 0; i < count; i++) {
char *d = (char *)(dm + 1) + (i * 2);
const char *d = (char *)(dm + 1) + (i * 2);
/* Skip disabled device */
if ((*d & 0x80) == 0)
......@@ -173,7 +175,7 @@ static void __init dmi_save_devices(struct dmi_header *dm)
}
}
static void __init dmi_save_oem_strings_devices(struct dmi_header *dm)
static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm)
{
int i, count = *(u8 *)(dm + 1);
struct dmi_device *dev;
......@@ -194,7 +196,7 @@ static void __init dmi_save_oem_strings_devices(struct dmi_header *dm)
}
}
static void __init dmi_save_ipmi_device(struct dmi_header *dm)
static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
{
struct dmi_device *dev;
void * data;
......@@ -225,7 +227,7 @@ static void __init dmi_save_ipmi_device(struct dmi_header *dm)
* and machine entries. For 2.5 we should pull the smbus controller info
* out of here.
*/
static void __init dmi_decode(struct dmi_header *dm)
static void __init dmi_decode(const struct dmi_header *dm)
{
switch(dm->type) {
case 0: /* BIOS Information */
......@@ -265,9 +267,10 @@ static void __init dmi_decode(struct dmi_header *dm)
}
}
static int __init dmi_present(char __iomem *p)
static int __init dmi_present(const char __iomem *p)
{
u8 buf[15];
memcpy_fromio(buf, p, 15);
if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
u16 num = (buf[13] << 8) | buf[12];
......@@ -348,10 +351,10 @@ void __init dmi_scan_machine(void)
* returns non zero or we hit the end. Callback function is called for
* each successful match. Returns the number of matches.
*/
int dmi_check_system(struct dmi_system_id *list)
int dmi_check_system(const struct dmi_system_id *list)
{
int i, count = 0;
struct dmi_system_id *d = list;
const struct dmi_system_id *d = list;
while (d->ident) {
for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
......@@ -380,7 +383,7 @@ EXPORT_SYMBOL(dmi_check_system);
* Returns one DMI data value, can be used to perform
* complex DMI data checks.
*/
char *dmi_get_system_info(int field)
const char *dmi_get_system_info(int field)
{
return dmi_ident[field];
}
......@@ -391,7 +394,7 @@ EXPORT_SYMBOL(dmi_get_system_info);
* dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
* @str: Case sensitive Name
*/
int dmi_name_in_vendors(char *str)
int dmi_name_in_vendors(const char *str)
{
static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
......@@ -418,13 +421,15 @@ EXPORT_SYMBOL(dmi_name_in_vendors);
* A new search is initiated by passing %NULL as the @from argument.
* If @from is not %NULL, searches continue from next device.
*/
struct dmi_device * dmi_find_device(int type, const char *name,
struct dmi_device *from)
const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from)
{
struct list_head *d, *head = from ? &from->list : &dmi_devices;
const struct list_head *head = from ? &from->list : &dmi_devices;
struct list_head *d;
for(d = head->next; d != &dmi_devices; d = d->next) {
struct dmi_device *dev = list_entry(d, struct dmi_device, list);
const struct dmi_device *dev =
list_entry(d, struct dmi_device, list);
if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
((name == NULL) || (strcmp(dev->name, name) == 0)))
......@@ -444,7 +449,7 @@ EXPORT_SYMBOL(dmi_find_device);
int dmi_get_year(int field)
{
int year;
char *s = dmi_get_system_info(field);
const char *s = dmi_get_system_info(field);
if (!s)
return -1;
......
......@@ -1449,7 +1449,7 @@ static int __init abituguru_init(void)
struct resource res = { .flags = IORESOURCE_IO };
#ifdef CONFIG_DMI
char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
/* safety check, refuse to load on non Abit motherboards */
if (!force && (!board_vendor ||
......
......@@ -1071,7 +1071,7 @@ static const struct attribute_group temperature_attributes_group =
/*
* applesmc_dmi_match - found a match. return one, short-circuiting the hunt.
*/
static int applesmc_dmi_match(struct dmi_system_id *id)
static int applesmc_dmi_match(const struct dmi_system_id *id)
{
int i = 0;
struct dmi_match_data* dmi_data = id->driver_data;
......
......@@ -480,14 +480,14 @@ static struct attribute_group hdaps_attribute_group = {
/* Module stuff */
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
static int __init hdaps_dmi_match(struct dmi_system_id *id)
static int __init hdaps_dmi_match(const struct dmi_system_id *id)
{
printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
return 1;
}
/* hdaps_dmi_match_invert - found an inverted match. */
static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id)
{
hdaps_invert = 1;
printk(KERN_INFO "hdaps: inverting axis readings.\n");
......
......@@ -588,7 +588,7 @@ out:
* Cable special cases
*/
static struct dmi_system_id cable_dmi_table[] = {
static const struct dmi_system_id cable_dmi_table[] = {
{
.ident = "HP Pavilion N5430",
.matches = {
......
......@@ -419,7 +419,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
* Cable special cases
*/
static struct dmi_system_id cable_dmi_table[] = {
static const struct dmi_system_id cable_dmi_table[] = {
{
.ident = "Acer Ferrari 3400",
.matches = {
......
......@@ -247,7 +247,7 @@ static int have_wifi;
static int have_bluetooth;
static int have_leds;
static int __init dmi_matched(struct dmi_system_id *dmi)
static int __init dmi_matched(const struct dmi_system_id *dmi)
{
const struct key_entry *key;
......
......@@ -27,7 +27,7 @@ struct lifebook_data {
static const char *desired_serio_phys;
static int lifebook_set_serio_phys(struct dmi_system_id *d)
static int lifebook_set_serio_phys(const struct dmi_system_id *d)
{
desired_serio_phys = d->driver_data;
return 0;
......@@ -35,13 +35,13 @@ static int lifebook_set_serio_phys(struct dmi_system_id *d)
static unsigned char lifebook_use_6byte_proto;
static int lifebook_set_6byte_proto(struct dmi_system_id *d)
static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
{
lifebook_use_6