Commit 17d30ac0 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits)
  mfd: Rename twl5031 sih modules
  mfd: Storage class for timberdale should be before const qualifier
  mfd: Remove unneeded and dangerous clearing of clientdata
  mfd: New AB8500 driver
  gpio: Fix inverted rdc321x gpio data out registers
  mfd: Change rdc321x resources flags to IORESOURCE_IO
  mfd: Move pcf50633 irq related functions to its own file.
  mfd: Use threaded irq for pcf50633
  mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read
  mfd: Fix pcf50633 bitfield logic in interrupt handler
  gpio: rdc321x needs to select MFD_CORE
  mfd: Use menuconfig for quicker config editing
  ARM: AB3550 board configuration and irq for U300
  mfd: AB3550 core driver
  mfd: AB3100 register access change to abx500 API
  mfd: Renamed ab3100.h to abx500.h
  gpio: Add TC35892 GPIO driver
  mfd: Add Toshiba's TC35892 MFD core
  mfd: Delay to mask tsc irq in max8925
  mfd: Remove incorrect wm8350 kfree
  ...
parents e38c1e54 191211f5
......@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
......@@ -24,6 +25,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6507x.h>
#include <linux/input/tps6507x-ts.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -533,10 +536,24 @@ struct regulator_init_data tps65070_regulator_data[] = {
},
};
static struct touchscreen_init_data tps6507x_touchscreen_data = {
.poll_period = 30, /* ms between touch samples */
.min_pressure = 0x30, /* minimum pressure to trigger touch */
.vref = 0, /* turn off vref when not using A/D */
.vendor = 0, /* /sys/class/input/input?/id/vendor */
.product = 65070, /* /sys/class/input/input?/id/product */
.version = 0x100, /* /sys/class/input/input?/id/version */
};
static struct tps6507x_board tps_board = {
.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
};
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps65070_regulator_data[0],
.platform_data = &tps_board,
},
};
......
......@@ -9,7 +9,7 @@
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/mfd/ab3100.h>
#include <linux/mfd/abx500.h>
#include <linux/regulator/machine.h>
#include <linux/amba/bus.h>
#include <mach/irqs.h>
......@@ -46,6 +46,7 @@
/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
#define BUCK_SLEEP_SETTING 0xAC
#ifdef CONFIG_AB3100_CORE
static struct regulator_consumer_supply supply_ldo_c[] = {
{
.dev_name = "ab3100-codec",
......@@ -253,14 +254,68 @@ static struct ab3100_platform_data ab3100_plf_data = {
LDO_D_SETTING,
},
};
#endif
#ifdef CONFIG_AB3550_CORE
static struct abx500_init_settings ab3550_init_settings[] = {
{
.bank = 0,
.reg = AB3550_IMR1,
.setting = 0xff
},
{
.bank = 0,
.reg = AB3550_IMR2,
.setting = 0xff
},
{
.bank = 0,
.reg = AB3550_IMR3,
.setting = 0xff
},
{
.bank = 0,
.reg = AB3550_IMR4,
.setting = 0xff
},
{
.bank = 0,
.reg = AB3550_IMR5,
/* The two most significant bits are not used */
.setting = 0x3f
},
};
static struct ab3550_platform_data ab3550_plf_data = {
.irq = {
.base = IRQ_AB3550_BASE,
.count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
},
.dev_data = {
},
.init_settings = ab3550_init_settings,
.init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
};
#endif
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
#if defined(CONFIG_AB3550_CORE)
{
.type = "ab3550",
.addr = 0x4A,
.irq = IRQ_U300_IRQ0_EXT,
.platform_data = &ab3550_plf_data,
},
#elif defined(CONFIG_AB3100_CORE)
{
.type = "ab3100",
.addr = 0x48,
.irq = IRQ_U300_IRQ0_EXT,
.platform_data = &ab3100_plf_data,
},
#else
{ },
#endif
};
static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
......
......@@ -109,6 +109,13 @@
#define U300_NR_IRQS 48
#endif
#ifdef CONFIG_AB3550_CORE
#define IRQ_AB3550_BASE (U300_NR_IRQS)
#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
#define NR_IRQS (IRQ_AB3550_END + 1)
#else
#define NR_IRQS U300_NR_IRQS
#endif
#endif
......@@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = {
static struct spi_board_info u8500_spi_devices[] = {
{
.modalias = "ab4500",
.modalias = "ab8500",
.controller_data = &ab4500_chip_info,
.max_speed_hz = 12000000,
.bus_num = 0,
......
......@@ -195,6 +195,13 @@ config GPIO_PCF857X
This driver provides an in-kernel interface to those GPIOs using
platform-neutral GPIO calls.
config GPIO_TC35892
bool "TC35892 GPIOs"
depends on MFD_TC35892
help
This enables support for the GPIOs found on the TC35892
I/O Expander.
config GPIO_TWL4030
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
depends on TWL4030_CORE
......@@ -282,6 +289,15 @@ config GPIO_TIMBERDALE
---help---
Add support for the GPIO IP in the timberdale FPGA.
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
depends on PCI && GPIOLIB
select MFD_CORE
select MFD_RDC321X
help
Support for the RDC R321x SoC GPIOs over southbridge
PCI configuration space.
comment "SPI GPIO expanders:"
config GPIO_MAX7301
......@@ -317,4 +333,14 @@ config GPIO_UCB1400
To compile this driver as a module, choose M here: the
module will be called ucb1400_gpio.
comment "MODULbus GPIO expanders:"
config GPIO_JANZ_TTL
tristate "Janz VMOD-TTL Digital IO Module"
depends on MFD_JANZ_CMODIO
help
This enables support for the Janz VMOD-TTL Digital IO module.
This driver provides support for driving the pins in output
mode only. Input mode is not supported.
endif
......@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
obj-$(CONFIG_GPIO_PL061) += pl061.o
obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o
obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_UCB1400) += ucb1400_gpio.o
......@@ -27,4 +28,6 @@ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o
obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
\ No newline at end of file
obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
/*
* Janz MODULbus VMOD-TTL GPIO Driver
*
* Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/mfd/janz.h>
#define DRV_NAME "janz-ttl"
#define PORTA_DIRECTION 0x23
#define PORTB_DIRECTION 0x2B
#define PORTC_DIRECTION 0x06
#define PORTA_IOCTL 0x24
#define PORTB_IOCTL 0x2C
#define PORTC_IOCTL 0x07
#define MASTER_INT_CTL 0x00
#define MASTER_CONF_CTL 0x01
#define CONF_PAE (1 << 2)
#define CONF_PBE (1 << 7)
#define CONF_PCE (1 << 4)
struct ttl_control_regs {
__be16 portc;
__be16 portb;
__be16 porta;
__be16 control;
};
struct ttl_module {
struct gpio_chip gpio;
/* base address of registers */
struct ttl_control_regs __iomem *regs;
u8 portc_shadow;
u8 portb_shadow;
u8 porta_shadow;
spinlock_t lock;
};
static int ttl_get_value(struct gpio_chip *gpio, unsigned offset)
{
struct ttl_module *mod = dev_get_drvdata(gpio->dev);
u8 *shadow;
int ret;
if (offset < 8) {
shadow = &mod->porta_shadow;
} else if (offset < 16) {
shadow = &mod->portb_shadow;
offset -= 8;
} else {
shadow = &mod->portc_shadow;
offset -= 16;
}
spin_lock(&mod->lock);
ret = *shadow & (1 << offset);
spin_unlock(&mod->lock);
return ret;
}
static void ttl_set_value(struct gpio_chip *gpio, unsigned offset, int value)
{
struct ttl_module *mod = dev_get_drvdata(gpio->dev);
void __iomem *port;
u8 *shadow;
if (offset < 8) {
port = &mod->regs->porta;
shadow = &mod->porta_shadow;
} else if (offset < 16) {
port = &mod->regs->portb;
shadow = &mod->portb_shadow;
offset -= 8;
} else {
port = &mod->regs->portc;
shadow = &mod->portc_shadow;
offset -= 16;
}
spin_lock(&mod->lock);
if (value)
*shadow |= (1 << offset);
else
*shadow &= ~(1 << offset);
iowrite16be(*shadow, port);
spin_unlock(&mod->lock);
}
static void __devinit ttl_write_reg(struct ttl_module *mod, u8 reg, u16 val)
{
iowrite16be(reg, &mod->regs->control);
iowrite16be(val, &mod->regs->control);
}
static void __devinit ttl_setup_device(struct ttl_module *mod)
{
/* reset the device to a known state */
iowrite16be(0x0000, &mod->regs->control);
iowrite16be(0x0001, &mod->regs->control);
iowrite16be(0x0000, &mod->regs->control);
/* put all ports in open-drain mode */
ttl_write_reg(mod, PORTA_IOCTL, 0x00ff);
ttl_write_reg(mod, PORTB_IOCTL, 0x00ff);
ttl_write_reg(mod, PORTC_IOCTL, 0x000f);
/* set all ports as outputs */
ttl_write_reg(mod, PORTA_DIRECTION, 0x0000);
ttl_write_reg(mod, PORTB_DIRECTION, 0x0000);
ttl_write_reg(mod, PORTC_DIRECTION, 0x0000);
/* set all ports to drive zeroes */
iowrite16be(0x0000, &mod->regs->porta);
iowrite16be(0x0000, &mod->regs->portb);
iowrite16be(0x0000, &mod->regs->portc);
/* enable all ports */
ttl_write_reg(mod, MASTER_CONF_CTL, CONF_PAE | CONF_PBE | CONF_PCE);
}
static int __devinit ttl_probe(struct platform_device *pdev)
{
struct janz_platform_data *pdata;
struct device *dev = &pdev->dev;
struct ttl_module *mod;
struct gpio_chip *gpio;
struct resource *res;
int ret;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(dev, "no platform data\n");
ret = -ENXIO;
goto out_return;
}
mod = kzalloc(sizeof(*mod), GFP_KERNEL);
if (!mod) {
dev_err(dev, "unable to allocate private data\n");
ret = -ENOMEM;
goto out_return;
}
platform_set_drvdata(pdev, mod);
spin_lock_init(&mod->lock);
/* get access to the MODULbus registers for this module */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "MODULbus registers not found\n");
ret = -ENODEV;
goto out_free_mod;
}
mod->regs = ioremap(res->start, resource_size(res));
if (!mod->regs) {
dev_err(dev, "MODULbus registers not ioremap\n");
ret = -ENOMEM;
goto out_free_mod;
}
ttl_setup_device(mod);
/* Initialize the GPIO data structures */
gpio = &mod->gpio;
gpio->dev = &pdev->dev;
gpio->label = pdev->name;
gpio->get = ttl_get_value;
gpio->set = ttl_set_value;
gpio->owner = THIS_MODULE;
/* request dynamic allocation */
gpio->base = -1;
gpio->ngpio = 20;
ret = gpiochip_add(gpio);
if (ret) {
dev_err(dev, "unable to add GPIO chip\n");
goto out_iounmap_regs;
}
dev_info(&pdev->dev, "module %d: registered GPIO device\n",
pdata->modno);
return 0;
out_iounmap_regs:
iounmap(mod->regs);
out_free_mod:
kfree(mod);
out_return:
return ret;
}
static int __devexit ttl_remove(struct platform_device *pdev)
{
struct ttl_module *mod = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
int ret;
ret = gpiochip_remove(&mod->gpio);
if (ret) {
dev_err(dev, "unable to remove GPIO chip\n");
return ret;
}
iounmap(mod->regs);
kfree(mod);
return 0;
}
static struct platform_driver ttl_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
.probe = ttl_probe,
.remove = __devexit_p(ttl_remove),
};
static int __init ttl_init(void)
{
return platform_driver_register(&ttl_driver);
}
static void __exit ttl_exit(void)
{
platform_driver_unregister(&ttl_driver);
}
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:janz-ttl");
module_init(ttl_init);
module_exit(ttl_exit);
/*
* RDC321x GPIO driver
*
* Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
* Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <linux/mfd/rdc321x.h>
#include <linux/slab.h>
struct rdc321x_gpio {
spinlock_t lock;
struct pci_dev *sb_pdev;
u32 data_reg[2];
int reg1_ctrl_base;
int reg1_data_base;
int reg2_ctrl_base;
int reg2_data_base;
struct gpio_chip chip;
};
/* read GPIO pin */
static int rdc_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
struct rdc321x_gpio *gpch;
u32 value = 0;
int reg;
gpch = container_of(chip, struct rdc321x_gpio, chip);
reg = gpio < 32 ? gpch->reg1_data_base : gpch->reg2_data_base;
spin_lock(&gpch->lock);
pci_write_config_dword(gpch->sb_pdev, reg,
gpch->data_reg[gpio < 32 ? 0 : 1]);
pci_read_config_dword(gpch->sb_pdev, reg, &value);
spin_unlock(&gpch->lock);
return (1 << (gpio & 0x1f)) & value ? 1 : 0;
}
static void rdc_gpio_set_value_impl(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct rdc321x_gpio *gpch;
int reg = (gpio < 32) ? 0 : 1;
gpch = container_of(chip, struct rdc321x_gpio, chip);
if (value)
gpch->data_reg[reg] |= 1 << (gpio & 0x1f);
else
gpch->data_reg[reg] &= ~(1 << (gpio & 0x1f));
pci_write_config_dword(gpch->sb_pdev,
reg ? gpch->reg2_data_base : gpch->reg1_data_base,
gpch->data_reg[reg]);
}
/* set GPIO pin to value */
static void rdc_gpio_set_value(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct rdc321x_gpio *gpch;
gpch = container_of(chip, struct rdc321x_gpio, chip);
spin_lock(&gpch->lock);
rdc_gpio_set_value_impl(chip, gpio, value);
spin_unlock(&gpch->lock);
}
static int rdc_gpio_config(struct gpio_chip *chip,
unsigned gpio, int value)
{
struct rdc321x_gpio *gpch;
int err;
u32 reg;
gpch = container_of(chip, struct rdc321x_gpio, chip);
spin_lock(&gpch->lock);
err = pci_read_config_dword(gpch->sb_pdev, gpio < 32 ?
gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, &reg);
if (err)
goto unlock;
reg |= 1 << (gpio & 0x1f);
err = pci_write_config_dword(gpch->sb_pdev, gpio < 32 ?
gpch->reg1_ctrl_base : gpch->reg2_ctrl_base, reg);
if (err)
goto unlock;
rdc_gpio_set_value_impl(chip, gpio, value);
unlock:
spin_unlock(&gpch->lock);
return err;
}
/* configure GPIO pin as input */
static int rdc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
return rdc_gpio_config(chip, gpio, 1);
}
/*
* Cache the initial value of both GPIO data registers
*/
static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
{
int err;
struct resource *r;
struct rdc321x_gpio *rdc321x_gpio_dev;
struct rdc321x_gpio_pdata *pdata;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data supplied\n");
return -ENODEV;
}
rdc321x_gpio_dev = kzalloc(sizeof(struct rdc321x_gpio), GFP_KERNEL);
if (!rdc321x_gpio_dev) {
dev_err(&pdev->dev, "failed to allocate private data\n");
return -ENOMEM;
}
r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg1");
if (!r) {
dev_err(&pdev->dev, "failed to get gpio-reg1 resource\n");
err = -ENODEV;
goto out_free;
}
spin_lock_init(&rdc321x_gpio_dev->lock);
rdc321x_gpio_dev->sb_pdev = pdata->sb_pdev;
rdc321x_gpio_dev->reg1_ctrl_base = r->start;
rdc321x_gpio_dev->reg1_data_base = r->start + 0x4;
r = platform_get_resource_byname(pdev, IORESOURCE_IO, "gpio-reg2");