Commit 12dbf3fc authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

parents 61b7efdd fc091e03
......@@ -3,46 +3,79 @@ AACRAID Driver for Linux (take two)
Introduction
-------------------------
The aacraid driver adds support for Adaptec (http://www.adaptec.com)
RAID controllers. This is a major rewrite from the original
RAID controllers. This is a major rewrite from the original
Adaptec supplied driver. It has signficantly cleaned up both the code
and the running binary size (the module is less than half the size of
the original).
Supported Cards/Chipsets
-------------------------
Adaptec 2020S
Adaptec 2025S
Adaptec 2120S
Adaptec 2130S
Adaptec 2200S
Adaptec 2230S
Adaptec 2240S
Adaptec 2410SA
Adaptec 2610SA
Adaptec 2810SA
Adaptec 21610SA
Adaptec 3230S
Adaptec 3240S
Adaptec 4000SAS
Adaptec 4005SAS
Adaptec 4800SAS
Adaptec 4805SAS
Adaptec 5400S
Dell PERC 2 Quad Channel
Dell PERC 2/Si
Dell PERC 3/Si
Dell PERC 3/Di
Dell CERC 2
HP NetRAID-4M
Legend S220
Legend S230
IBM ServeRAID 8i
ICP 9014R0
ICP 9024R0
ICP 9047MA
ICP 9087MA
ICP 9085LI
ICP 5085AU
PCI ID (pci.ids) OEM Product
9005:0285:9005:028a Adaptec 2020ZCR (Skyhawk)
9005:0285:9005:028e Adaptec 2020SA (Skyhawk)
9005:0285:9005:028b Adaptec 2025ZCR (Terminator)
9005:0285:9005:028f Adaptec 2025SA (Terminator)
9005:0285:9005:0286 Adaptec 2120S (Crusader)
9005:0286:9005:028d Adaptec 2130S (Lancer)
9005:0285:9005:0285 Adaptec 2200S (Vulcan)
9005:0285:9005:0287 Adaptec 2200S (Vulcan-2m)
9005:0286:9005:028c Adaptec 2230S (Lancer)
9005:0286:9005:028c Adaptec 2230SLP (Lancer)
9005:0285:9005:0296 Adaptec 2240S (SabreExpress)
9005:0285:9005:0290 Adaptec 2410SA (Jaguar)
9005:0285:9005:0293 Adaptec 21610SA (Corsair-16)
9005:0285:103c:3227 Adaptec 2610SA (Bearcat)
9005:0285:9005:0292 Adaptec 2810SA (Corsair-8)
9005:0285:9005:0294 Adaptec Prowler
9005:0286:9005:029d Adaptec 2420SA (Intruder)
9005:0286:9005:029c Adaptec 2620SA (Intruder)
9005:0286:9005:029b Adaptec 2820SA (Intruder)
9005:0286:9005:02a7 Adaptec 2830SA (Skyray)
9005:0286:9005:02a8 Adaptec 2430SA (Skyray)
9005:0285:9005:0288 Adaptec 3230S (Harrier)
9005:0285:9005:0289 Adaptec 3240S (Tornado)
9005:0285:9005:0298 Adaptec 4000SAS (BlackBird)
9005:0285:9005:0297 Adaptec 4005SAS (AvonPark)
9005:0285:9005:0299 Adaptec 4800SAS (Marauder-X)
9005:0285:9005:029a Adaptec 4805SAS (Marauder-E)
9005:0286:9005:02a2 Adaptec 4810SAS (Hurricane)
1011:0046:9005:0364 Adaptec 5400S (Mustang)
1011:0046:9005:0365 Adaptec 5400S (Mustang)
9005:0283:9005:0283 Adaptec Catapult (3210S with arc firmware)
9005:0284:9005:0284 Adaptec Tomcat (3410S with arc firmware)
9005:0287:9005:0800 Adaptec Themisto (Jupiter)
9005:0200:9005:0200 Adaptec Themisto (Jupiter)
9005:0286:9005:0800 Adaptec Callisto (Jupiter)
1011:0046:9005:1364 Dell PERC 2/QC (Quad Channel, Mustang)
1028:0001:1028:0001 Dell PERC 2/Si (Iguana)
1028:0003:1028:0003 Dell PERC 3/Si (SlimFast)
1028:0002:1028:0002 Dell PERC 3/Di (Opal)
1028:0004:1028:0004 Dell PERC 3/DiF (Iguana)
1028:0002:1028:00d1 Dell PERC 3/DiV (Viper)
1028:0002:1028:00d9 Dell PERC 3/DiL (Lexus)
1028:000a:1028:0106 Dell PERC 3/DiJ (Jaguar)
1028:000a:1028:011b Dell PERC 3/DiD (Dagger)
1028:000a:1028:0121 Dell PERC 3/DiB (Boxster)
9005:0285:1028:0287 Dell PERC 320/DC (Vulcan)
9005:0285:1028:0291 Dell CERC 2 (DellCorsair)
1011:0046:103c:10c2 HP NetRAID-4M (Mustang)
9005:0285:17aa:0286 Legend S220 (Crusader)
9005:0285:17aa:0287 Legend S230 (Vulcan)
9005:0285:9005:0290 IBM ServeRAID 7t (Jaguar)
9005:0285:1014:02F2 IBM ServeRAID 8i (AvonPark)
9005:0285:1014:0312 IBM ServeRAID 8i (AvonParkLite)
9005:0286:1014:9580 IBM ServeRAID 8k/8k-l8 (Aurora)
9005:0286:1014:9540 IBM ServeRAID 8k/8k-l4 (AuroraLite)
9005:0286:9005:029f ICP ICP9014R0 (Lancer)
9005:0286:9005:029e ICP ICP9024R0 (Lancer)
9005:0286:9005:02a0 ICP ICP9047MA (Lancer)
9005:0286:9005:02a1 ICP ICP9087MA (Lancer)
9005:0286:9005:02a4 ICP ICP9085LI (Marauder-X)
9005:0286:9005:02a5 ICP ICP5085BR (Marauder-E)
9005:0286:9005:02a3 ICP ICP5085AU (Hurricane)
9005:0286:9005:02a6 ICP ICP9067MA (Intruder-6)
9005:0286:9005:02a9 ICP ICP5087AU (Skyray)
9005:0286:9005:02aa ICP ICP5047AU (Skyray)
People
-------------------------
......@@ -68,7 +101,8 @@ Mailing List
linux-scsi@vger.kernel.org (Interested parties troll here)
Also note this is very different to Brian's original driver
so don't expect him to support it.
Adaptec does support this driver. Contact either tech support or Mark Salyzyn.
Adaptec does support this driver. Contact Adaptec tech support or
aacraid@adaptec.com
Original by Brian Boerner February 2001
Rewritten by Alan Cox, November 2001
......@@ -23,6 +23,7 @@ config FUSION_FC
tristate "Fusion MPT ScsiHost drivers for FC"
depends on PCI && SCSI
select FUSION
select SCSI_FC_ATTRS
---help---
SCSI HOST support for a Fiber Channel host adapters.
......
......@@ -6,7 +6,7 @@
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
* mpi.h Version: 01.05.08
* mpi.h Version: 01.05.10
*
* Version History
* ---------------
......@@ -74,6 +74,8 @@
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* --------------------------------------------------------------------------
*/
......@@ -104,7 +106,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
#define MPI_HEADER_VERSION_UNIT (0x0A)
#define MPI_HEADER_VERSION_UNIT (0x0C)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
......@@ -711,6 +713,8 @@ typedef struct _MSG_DEFAULT_REPLY
#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
/****************************************************************************/
/* Additional FCP target values (obsolete) */
......@@ -745,7 +749,7 @@ typedef struct _MSG_DEFAULT_REPLY
#define MPI_IOCSTATUS_LAN_CANCELED (0x0087)
/****************************************************************************/
/* Serial Attached SCSI values */
/* Serial Attached SCSI values */
/****************************************************************************/
#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
......
......@@ -6,7 +6,7 @@
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
* mpi_cnfg.h Version: 01.05.09
* mpi_cnfg.h Version: 01.05.11
*
* Version History
* ---------------
......@@ -249,6 +249,23 @@
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
* Manufacturing Page 4.
* Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
* Added NumDevsPerEnclosure field to SAS IO Unit page 2.
* Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
* define.
* Added EnclosureHandle field to SAS Expander page 0.
* Removed redundant NumTableEntriesProg field from SAS
* Expander Page 1.
* 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
* SAS1078.
* Added more defines for Manufacturing Page 4 Flags field.
* Added more defines for IOCSettings and added
* ExpanderSpinup field to Bios Page 1.
* Added postpone SATA Init bit to SAS IO Unit Page 1
* ControlFlags.
* Changed LogEntry format for Log Page 0.
* --------------------------------------------------------------------------
*/
......@@ -494,7 +511,7 @@ typedef struct _MSG_CONFIG_REPLY
#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642)
#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640)
#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646)
#define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646)
/* SCSI */
#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
......@@ -510,7 +527,7 @@ typedef struct _MSG_CONFIG_REPLY
#define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A)
#define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054)
#define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058)
#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0060)
#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062)
typedef struct _CONFIG_PAGE_MANUFACTURING_0
......@@ -602,9 +619,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
U32 IMVolumeSettings; /* 50h */
U32 Reserved3; /* 54h */
U32 Reserved4; /* 58h */
U8 ISDataScrubRate; /* 5Ch */
U8 ISResyncRate; /* 5Dh */
U16 Reserved5; /* 5Eh */
U32 Reserved5; /* 5Ch */
U8 IMEDataScrubRate; /* 60h */
U8 IMEResyncRate; /* 61h */
U16 Reserved6; /* 62h */
......@@ -616,9 +631,14 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
#define MPI_MANUFACTURING4_PAGEVERSION (0x02)
#define MPI_MANUFACTURING4_PAGEVERSION (0x03)
/* defines for the Flags field */
#define MPI_MANPAGE4_IME_DISABLE (0x20)
#define MPI_MANPAGE4_IM_DISABLE (0x10)
#define MPI_MANPAGE4_IS_DISABLE (0x08)
#define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04)
#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02)
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
......@@ -669,7 +689,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1
} CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
#define MPI_IOUNITPAGE1_PAGEVERSION (0x01)
#define MPI_IOUNITPAGE1_PAGEVERSION (0x02)
/* IO Unit Page 1 Flags defines */
#define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000)
......@@ -681,7 +701,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1
#define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040)
#define MPI_IOUNITPAGE1_FORCE_32 (0x00000080)
#define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
#define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE (0x00000200)
typedef struct _MPI_ADAPTER_INFO
{
......@@ -968,7 +988,8 @@ typedef struct _CONFIG_PAGE_BIOS_1
U32 Reserved1; /* 0Ch */
U32 DeviceSettings; /* 10h */
U16 NumberOfDevices; /* 14h */
U16 Reserved2; /* 16h */
U8 ExpanderSpinup; /* 16h */
U8 Reserved2; /* 17h */
U16 IOTimeoutBlockDevicesNonRM; /* 18h */
U16 IOTimeoutSequential; /* 1Ah */
U16 IOTimeoutOther; /* 1Ch */
......@@ -976,7 +997,7 @@ typedef struct _CONFIG_PAGE_BIOS_1
} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
#define MPI_BIOSPAGE1_PAGEVERSION (0x02)
#define MPI_BIOSPAGE1_PAGEVERSION (0x03)
/* values for the BiosOptions field */
#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
......@@ -985,8 +1006,15 @@ typedef struct _CONFIG_PAGE_BIOS_1
#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for the IOCSettings field */
#define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000)
#define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000)
#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20)
#define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000)
#define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000)
#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
......@@ -1016,6 +1044,11 @@ typedef struct _CONFIG_PAGE_BIOS_1
#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
/* defines for the ExpanderSpinup field */
#define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0)
#define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4)
#define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F)
typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
{
U32 Reserved1; /* 00h */
......@@ -1233,13 +1266,13 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_0
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8)
#define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \
( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \
( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \
)
#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000)
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16)
#define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \
( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \
( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \
)
#define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000)
......@@ -2370,47 +2403,48 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04)
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800)
#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008)
#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800)
#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
#define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008)
#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/* values for SAS IO Unit Page 1 PortFlags */
#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
/* values for SAS IO Unit Page 0 PhyFlags */
#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04)
#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02)
#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01)
#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04)
#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02)
#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01)
/* values for SAS IO Unit Page 0 MaxMinLinkRate */
#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0)
#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80)
#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F)
#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08)
#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09)
#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0)
#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80)
#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90)
#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F)
#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08)
#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09)
/* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
......@@ -2418,16 +2452,18 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
U32 Reserved1; /* 08h */
U8 NumDevsPerEnclosure; /* 08h */
U8 Reserved1; /* 09h */
U16 Reserved2; /* 0Ah */
U16 MaxPersistentIDs; /* 0Ch */
U16 NumPersistentIDsUsed; /* 0Eh */
U8 Status; /* 10h */
U8 Flags; /* 11h */
U16 MaxNumPhysicalMappedIDs;/* 12h */ /* 12h */
U16 MaxNumPhysicalMappedIDs;/* 12h */
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x04)
#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 2 Status field */
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
......@@ -2441,6 +2477,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
#define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00)
#define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01)
#define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02)
#define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP (0x07)
#define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10)
#define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20)
......@@ -2473,7 +2510,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
U8 PhysicalPort; /* 08h */
U8 Reserved1; /* 09h */
U16 Reserved2; /* 0Ah */
U16 EnclosureHandle; /* 0Ah */
U64 SASAddress; /* 0Ch */
U32 DiscoveryStatus; /* 14h */
U16 DevHandle; /* 18h */
......@@ -2487,7 +2524,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
} CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
#define MPI_SASEXPANDER0_PAGEVERSION (0x02)
#define MPI_SASEXPANDER0_PAGEVERSION (0x03)
/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
......@@ -2527,9 +2564,9 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
U8 NegotiatedLinkRate; /* 1Fh */
U8 PhyIdentifier; /* 20h */
U8 AttachedPhyIdentifier; /* 21h */
U8 NumTableEntriesProg; /* 22h */
U8 Reserved3; /* 22h */
U8 DiscoveryInfo; /* 23h */
U32 Reserved3; /* 24h */
U32 Reserved4; /* 24h */
} CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
......@@ -2766,16 +2803,15 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
#define MPI_LOG_0_NUM_LOG_ENTRIES (1)
#endif
#define MPI_LOG_0_LOG_DATA_LENGTH (20)
#define MPI_LOG_0_LOG_DATA_LENGTH (0x1C)
typedef struct _MPI_LOG_0_ENTRY
{
U64 WWID; /* 00h */
U32 TimeStamp; /* 08h */
U32 Reserved1; /* 0Ch */
U16 LogSequence; /* 10h */
U16 LogEntryQualifier; /* 12h */
U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */
U32 TimeStamp; /* 00h */
U32 Reserved1; /* 04h */
U16 LogSequence; /* 08h */
U16 LogEntryQualifier; /* 0Ah */
U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
} MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
......@@ -2794,7 +2830,7 @@ typedef struct _CONFIG_PAGE_LOG_0
} CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
LogPage0_t, MPI_POINTER pLogPage0_t;
#define MPI_LOG_0_PAGEVERSION (0x00)
#define MPI_LOG_0_PAGEVERSION (0x01)
#endif
......
......@@ -6,25 +6,25 @@
Copyright (c) 2000-2005 LSI Logic Corporation.
---------------------------------------
Header Set Release Version: 01.05.10
Header Set Release Date: 03-11-05
Header Set Release Version: 01.05.12
Header Set Release Date: 08-30-05
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
mpi.h 01.05.08 01.05.07
mpi_ioc.h 01.05.09 01.05.08
mpi_cnfg.h 01.05.09 01.05.08
mpi_init.h 01.05.05 01.05.04
mpi_targ.h 01.05.05 01.05.04
mpi.h 01.05.10 01.05.09
mpi_ioc.h 01.05.10 01.05.09
mpi_cnfg.h 01.05.11 01.05.10
mpi_init.h 01.05.06 01.05.06
mpi_targ.h 01.05.05 01.05.05
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01
mpi_history.txt 01.05.09 01.05.09
mpi_sas.h 01.05.02 01.05.01
mpi_type.h 01.05.02 01.05.01
mpi_history.txt 01.05.12 01.05.11
* Date Version Description
......@@ -91,6 +91,8 @@ mpi.h
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* --------------------------------------------------------------------------
mpi_ioc.h
......@@ -164,6 +166,10 @@ mpi_ioc.h
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
* 08-30-05 01.05.10 Added 4 new events and their event data structures.
* Added new ReasonCode value for SAS Device Status Change
* event.
* Added new family code for FC949E.
* --------------------------------------------------------------------------
mpi_cnfg.h
......@@ -402,6 +408,23 @@ mpi_cnfg.h
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
* Manufacturing Page 4.
* Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
* Added NumDevsPerEnclosure field to SAS IO Unit page 2.
* Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
* define.
* Added EnclosureHandle field to SAS Expander page 0.
* Removed redundant NumTableEntriesProg field from SAS
* Expander Page 1.
* 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
* SAS1078.
* Added more defines for Manufacturing Page 4 Flags field.
* Added more defines for IOCSettings and added
* ExpanderSpinup field to Bios Page 1.
* Added postpone SATA Init bit to SAS IO Unit Page 1
* ControlFlags.
* Changed LogEntry format for Log Page 0.
* --------------------------------------------------------------------------
mpi_init.h
......@@ -442,6 +465,8 @@ mpi_init.h
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* --------------------------------------------------------------------------
mpi_targ.h
......@@ -582,6 +607,9 @@ mpi_inb.h
mpi_sas.h
* 08-19-04 01.05.01 Original release.
* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
* Added PrimFlags and Primitive field to SAS IO Unit
* Control request, and added a new operation code.
* --------------------------------------------------------------------------
mpi_type.h
......@@ -592,24 +620,25 @@ mpi_type.h
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 08-30-05 01.05.02 Added PowerPC option to #ifdef's.
* --------------------------------------------------------------------------
mpi_history.txt Parts list history
Filename 01.05.10 01.05.09
---------- -------- --------
mpi.h 01.05.08 01.05.07
mpi_ioc.h 01.05.09 01.05.08
mpi_cnfg.h 01.05.09 01.05.08
mpi_init.h 01.05.05 01.05.04
mpi_targ.h 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01
Filename 01.05.12 01.05.11 01.05.10 01.05.09
---------- -------- -------- -------- --------
mpi.h 01.05.10 01.05.09 01.05.08 01.05.07
mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08
mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08
mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04
mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01
mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
......