Commit 0112c9e9 authored by Anna Neal's avatar Anna Neal Committed by John W. Linville
Browse files

libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.



iwconfig txpower can now be used to set tx power to fixed or auto. If set to
auto the default firmware settings are used.

The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams
noted the command was no longer supported in firmware V9+.
Signed-off-by: default avatarAnna Neal <anna@cozybit.com>
Signed-off-by: default avatarJavier Cardona <javier@cozybit.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent aee14ceb
......@@ -1971,6 +1971,70 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv)
}
/**
* @brief Configures the transmission power control functionality.
*
* @param priv A pointer to struct lbs_private structure
* @param enable Transmission power control enable
* @param p0 Power level when link quality is good (dBm).
* @param p1 Power level when link quality is fair (dBm).
* @param p2 Power level when link quality is poor (dBm).
* @param usesnr Use Signal to Noise Ratio in TPC
*
* @return 0 on success
*/
int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
int8_t p2, int usesnr)
{
struct cmd_ds_802_11_tpc_cfg cmd;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.hdr.size = cpu_to_le16(sizeof(cmd));
cmd.action = cpu_to_le16(CMD_ACT_SET);
cmd.enable = !!enable;
cmd.usesnr = !!enable;
cmd.P0 = p0;
cmd.P1 = p1;
cmd.P2 = p2;
ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd);
return ret;
}
/**
* @brief Configures the power adaptation settings.
*
* @param priv A pointer to struct lbs_private structure
* @param enable Power adaptation enable
* @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm).
* @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
* @param p2 Power level for 48 and 54 Mbps (dBm).
*
* @return 0 on Success
*/
int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
int8_t p1, int8_t p2)
{
struct cmd_ds_802_11_pa_cfg cmd;
int ret;
memset(&cmd, 0, sizeof(cmd));
cmd.hdr.size = cpu_to_le16(sizeof(cmd));
cmd.action = cpu_to_le16(CMD_ACT_SET);
cmd.enable = !!enable;
cmd.P0 = p0;
cmd.P1 = p1;
cmd.P2 = p2;
ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd);
return ret;
}
static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
......
......@@ -26,6 +26,12 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command,
int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
unsigned long callback_arg);
int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
int8_t p1, int8_t p2);
int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
int8_t p2, int usesnr);
int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp);
......
......@@ -189,6 +189,15 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
#define MRVDRV_CMD_UPLD_RDY 0x0008
#define MRVDRV_CARDEVENT 0x0010
/* Automatic TX control default levels */
#define POW_ADAPT_DEFAULT_P0 13
#define POW_ADAPT_DEFAULT_P1 15
#define POW_ADAPT_DEFAULT_P2 18
#define TPC_DEFAULT_P0 5
#define TPC_DEFAULT_P1 10
#define TPC_DEFAULT_P2 13
/** TxPD status */
/* Station firmware use TxPD status field to report final Tx transmit
......
......@@ -83,6 +83,7 @@
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
#define CMD_802_11_SLEEP_PERIOD 0x0068
#define CMD_802_11_TPC_CFG 0x0072
#define CMD_802_11_PA_CFG 0x0073
#define CMD_802_11_FW_WAKE_METHOD 0x0074
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
......
......@@ -607,14 +607,28 @@ struct cmd_ds_802_11_eeprom_access {
} __attribute__ ((packed));
struct cmd_ds_802_11_tpc_cfg {
struct cmd_header hdr;
__le16 action;
u8 enable;
s8 P0;
s8 P1;
s8 P2;
u8 usesnr;
uint8_t enable;
int8_t P0;
int8_t P1;
int8_t P2;
uint8_t usesnr;
} __attribute__ ((packed));
struct cmd_ds_802_11_pa_cfg {
struct cmd_header hdr;
__le16 action;
uint8_t enable;
int8_t P0;
int8_t P1;
int8_t P2;
} __attribute__ ((packed));
struct cmd_ds_802_11_led_ctrl {
__le16 action;
__le16 numled;
......
......@@ -1820,7 +1820,21 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
}
if (vwrq->fixed == 0) {
/* Auto power control */
/* User requests automatic tx power control, however there are
* many auto tx settings. For now use firmware defaults until
* we come up with a good way to expose these to the user. */
if (priv->fwrelease < 0x09000000) {
ret = lbs_set_power_adapt_cfg(priv, 1,
POW_ADAPT_DEFAULT_P0,
POW_ADAPT_DEFAULT_P1,
POW_ADAPT_DEFAULT_P2);
if (ret)
goto out;
}
ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
TPC_DEFAULT_P2, 1);
if (ret)
goto out;
dbm = priv->txpower_max;
} else {
/* Userspace check in iwrange if it should use dBm or mW,
......@@ -1830,7 +1844,8 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
goto out;
}
/* Validate requested power level against firmware allowed levels */
/* Validate requested power level against firmware allowed
* levels */
if (priv->txpower_min && (dbm < priv->txpower_min)) {
ret = -EINVAL;
goto out;
......@@ -1840,6 +1855,18 @@ static int lbs_set_txpow(struct net_device *dev, struct iw_request_info *info,
ret = -EINVAL;
goto out;
}
if (priv->fwrelease < 0x09000000) {
ret = lbs_set_power_adapt_cfg(priv, 0,
POW_ADAPT_DEFAULT_P0,
POW_ADAPT_DEFAULT_P1,
POW_ADAPT_DEFAULT_P2);
if (ret)
goto out;
}
ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
TPC_DEFAULT_P2, 1);
if (ret)
goto out;
}
/* If the radio was off, turn it on */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment