Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a
very significant drop in networking performance. The test were
conducted on an OpenBlocks A7 board. Without this patch, the outgoing
performance measured with iperf are:

 - highmem OFF, TSO OFF   544 Mbit/s
 - highmem OFF, TSO ON	  942 Mbit/s
 - highmem ON,  TSO OFF   306 Mbit/s
 - highmem ON,  TSO ON    246 Mbit/s

On this Kirkwood platform, the L2 cache is a Feroceon cache, and with
this cache, all the range operations have to be done on virtual
addresses and not physical addresses. Therefore, whenever
CONFIG_HIGHMEM is enabled, the cache maintenance operations call
kmap_atomic_pfn() and kunmap_atomic().

However, kmap_atomic_pfn() does not implement the same fast path for
non-highmem pages as the one implemented in kmap_atomic(), and this is
one of the reason for the performance drop. While this patch does not
fully restore the performances, it clearly improves them a lot:

      	      	        without patch  with patch

 - highmem ON, TSO OFF   306 Mbit/s     387 Mbit/s
 - highmem ON, TSO ON    246 Mbit/s     434 Mbit/s

We're still far from the !CONFIG_HIGHMEM performances, but it does
improve a bit the situation.

Thanks a lot to Ezequiel Garcia and Gregory Clement for all the
testing work around this topic.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>