Skip to content
  • Florian Fainelli's avatar
    zd1211rw: wait between setting hash table and powering radio on · 02f1434d
    Florian Fainelli authored
    
    
    I am running Debian testing kernel 3.1.0-1-amd64, using a 079b:0062 Sagem
    XG-76NA 802.11bg stick.
    
    Upon zd1211rw interface
    bringup (ifconfig wlan0 up) I get the following timeout:
    
    [  950.330573] zd1211rw 1-3:1.0: phy2
    [  955.108510] zd1211rw 1-3:1.0: firmware version 4725
    [  955.148532] zd1211rw 1-3:1.0: zd1211b chip 079b:0062 v4810 high 00-19-70
    AL2230_RF pa0 g--NS
    [snip]
    [  955.204072] zd1211rw 1-3:1.0: error ioread32(CR_REG1): -110
    
    A second ifconfig wlan0 up brings the interface up without problems.
    
    After a bit more debugging, the call trace is the following:
    
    [10241.028130] zd1211rw 1-3:1.0: zd_chip_lock_phy_regs: error
    ioread32(CR_REG1): -110
    [10241.028140] zd1211rw 1-3:1.0: zd_switch_radio_on: failed to lock PHY regs
    [10241.028148] zd1211rw 1-3:1.0: zd_op_start: failed to set radio on
    
    Adding a 10 milliseconds delay between the call to set_mc_hash() and
    zd_chip_switch_radio_on() allows successful interface bringups in all
    cases and matches what the vendor driver did.
    
    Acked-by: default avatarJussi Kivilinna <jussi.kivilinna@mbnet.fi>
    Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
    Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
    02f1434d