this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>