Second instance of scoop contains registers shifted to 0x40 from the start
of the page. Instead of messing with register mapping, just limit register
address to 0x00..0x3f.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Mainstone board has two flash chips (emulated by two ram regions), however
currently code tries to allocate them with the same name, which fails.
Fix that to make mainstone emulation work again.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

I'm using the Qemu program with VNC I/O, and I had some problems with
my keyboard layout, so I've prepared a definition to be included in
Qemu, built from Xorg description.

Signed-off-by: Frédéric Boiteux <fboiteux@free.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

When operating on the SCIF, process all the received characters, as long
as the FIFO can handle them.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

The indirection functions are empty since commit
8da3ff18

.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

When a modifier key is pressed or released, the USB HID keyboard still
answers NAK, unless another key is also pressed or released.

The patch fixes that by calling usb_hid_changed() when a modifier key
is pressed or released.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting
the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is
returning the correct value, and the other true for any kind of NaN.

This patch fixes that by applying the same kind of comparison as for
other float formats, but taking into account the explicit bit.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Use this for assignment to the low byte or low word of a register.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Load/store reversed (lwr/swr) are insns that endian translate
the sub-word part of the address and byteswap the data lanes.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Fix several bugs in NaN handling:
 * e in fcmpe* only changes qNaN handling
 * FCC is unchanged if an exception is raised
 * clear previous FTT before setting it

Reported-by: Mateusz Loskot <mateusz@loskot.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Add support for logging the start of instructions in TCG
code debug dumps for ARM targets.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Break the TB after reading the count register. This makes it
possible to take timer interrupts immediately after a read of
a possibly expired timer.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

When reading cp0_count from a timer with a late trigger that should
already have expired, expire it and raise the timer irq.

This makes it possible for guest code (e.g, Linux) that first read
cp0_count, then compare it with cp0_compare and check for raised
timer interrupt lines to run reliably.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Reorganize for future patches, no functional change.

Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

These errors were reported by cppcheck:

[bsd-user/elfload.c:1108]: (error) Common realloc mistake: "syms" nulled but not freed upon failure
[bsd-user/elfload.c:1076]: (error) Memory leak: s
[bsd-user/elfload.c:1079]: (error) Memory leak: syms

v2:
* The previous fix for memory leaks was incomplete (thanks to Peter Maydell for te hint).
* Fix wrong realloc usage, too.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Linux kernel started to use the SM501 2D engine for the console, and
especially the copyrect operation.

Implement this operation so that recent kernels can be used with QEMU.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

This fixes boot on PPC prep.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

On Windows, this is required to flush the remaining data in the IO stream,
otherwise Gdb do not receive the last packet.

Version 2:
   Fix linux-user build error.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>

The USB keyboard emulation's translation table in hw/usb-hid.c doesn't
match the codes actually sent for the Logo (a.k.a. "Windows") or Menu
keys. This results in the guest OS not being able to receive these keys
at all when the USB keyboard emulation is being used.

In particular, both the keymap in /usr/share/kvm/keymaps/modifiers and
the evdev table in x_keymap.c map these keys to 0xdb, 0xdc, and 0xdd,
while usb_hid_usage_keys[] seems to be expecting them to be mapped to
0x7d, 0x7e, and 0x7f.

The attached patch seems to fix the problem, at least in my (limited)
testing.

http://bugs.debian.org/578846
http://bugs.debian.org/600593 (cloned from the above against different pkg)
https://bugs.launchpad.net/qemu/+bug/584139



Signed-Off-By: Brad Jorsch <anomie@users.sourceforge.net>
Signed-Off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Using setcond it's now possible to generate a relatively short negc
instruction in TCG.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

With current OpenBSD, code_gen_buffer was mapped 8GB away from
text segment. Then any helpers were beyond the 2GB range of call
instruction genereated by TCG and so the calls would go nowhere,
leading to a segfault.

Fix by specifying an address for the code_gen_buffer,
hopefully free and nearby the helpers.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix wrong usage of ! and & in MMU related functions. Thanks to Blue
Swirl for reporting the issue.

Reported-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

Fix usage of wrong variable, spotted by clang:
/src/qemu/monitor.c:2278:36: warning: The left operand of '&' is a garbage value
                        prot = pde & (PG_USER_MASK | PG_RW_MASK |

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

ORS=" " adds a blank to the name of the include file.
Some shells (e.g. dash) don't accept input redirection
(tr -d '\r' < $f) when $f ends with a blank, so they
print an error message instead of reading pci.mak.
This is a non-fatal error because pci.mak does not
contain an include line. It was introduced by commit
5d6b423c

.

Using printf avoids adding a blank and is also supported
by older awk versions (this solution was suggested by
Paolo Bonzini, thank you).

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Tested-by: Andreas Färber <andreas.faerber@web.de>