Skip to content

GitLab

Commit 03c7a6a8 authored by Sebastian Herbszt's avatar Sebastian Herbszt Committed by Kevin Wolf
Browse files

ahci: split ICH9 from core 



There are multiple ahci devices out there. The currently implemented ich-9
is only one of the many. So let's split that one out into a separate file
to stress the difference.
Signed-off-by: default avatarSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
Signed-off-by: default avatarKevin Wolf <kwolf@redhat.com>
parent 4f3669ea
Hide whitespace changes
Inline Side-by-side
Makefile.objs
View file @ 03c7a6a8
......@@ -244,6 +244,7 @@ hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
hw-obj-$(CONFIG_AHCI) += ide/ahci.o
hw-obj-$(CONFIG_AHCI) += ide/ich.o
# SCSI layer
hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
......
hw/ide/ahci.c
View file @ 03c7a6a8
......@@ -72,6 +72,7 @@
#include "cpu-common.h"
#include "internal.h"
#include <hw/ide/pci.h>
#include <hw/ide/ahci.h>
/* #define DEBUG_AHCI */
......@@ -83,304 +84,6 @@ do { fprintf(stderr, "ahci: %s: [%d] ", __FUNCTION__, port); \
#define DPRINTF(port, fmt, ...) do {} while(0)
#endif
#define AHCI_PCI_BAR 5
#define AHCI_MAX_PORTS 32
#define AHCI_MAX_SG 168 /* hardware max is 64K */
#define AHCI_DMA_BOUNDARY 0xffffffff
#define AHCI_USE_CLUSTERING 0
#define AHCI_MAX_CMDS 32
#define AHCI_CMD_SZ 32
#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
#define AHCI_RX_FIS_SZ 256
#define AHCI_CMD_TBL_CDB 0x40
#define AHCI_CMD_TBL_HDR_SZ 0x80
#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
AHCI_RX_FIS_SZ)
#define AHCI_IRQ_ON_SG (1 << 31)
#define AHCI_CMD_ATAPI (1 << 5)
#define AHCI_CMD_WRITE (1 << 6)
#define AHCI_CMD_PREFETCH (1 << 7)
#define AHCI_CMD_RESET (1 << 8)
#define AHCI_CMD_CLR_BUSY (1 << 10)
#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
/* global controller registers */
#define HOST_CAP 0x00 /* host capabilities */
#define HOST_CTL 0x04 /* global host control */
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
/* HOST_CTL bits */
#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */
/* HOST_CAP bits */
#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */
/* registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
#define PORT_IRQ_STAT 0x10 /* interrupt status */
#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
#define PORT_CMD 0x18 /* port command */
#define PORT_TFDATA 0x20 /* taskfile data */
#define PORT_SIG 0x24 /* device TF signature */
#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
#define PORT_CMD_ISSUE 0x38 /* command issue */
#define PORT_RESERVED 0x3c /* reserved */
/* PORT_IRQ_{STAT,MASK} bits */
#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
PORT_IRQ_UNK_FIS)
#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
PORT_IRQ_HBUS_DATA_ERR)
#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
/* PORT_CMD bits */
#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
#define PORT_CMD_CLO (1 << 3) /* Command list override */
#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */
#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
Status */
#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
Status */
#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
Status */
#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */
/* ap->flags bits */
#define AHCI_FLAG_NO_NCQ (1 << 24)
#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
#define ATA_SRST (1 << 2) /* software reset */
#define STATE_RUN 0
#define STATE_RESET 1
#define SATA_SCR_SSTATUS_DET_NODEV 0x0
#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
#define AHCI_SCR_SCTL_DET 0xf
#define SATA_FIS_TYPE_REGISTER_H2D 0x27
#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
#define AHCI_CMD_HDR_PRDT_LEN 16
#define SATA_SIGNATURE_CDROM 0xeb140000
#define SATA_SIGNATURE_DISK 0x00000101
#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
/* Shouldn't this be 0x2c? */
#define SATA_PORTS 4
#define AHCI_PORT_REGS_START_ADDR 0x100
#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80)
#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
#define AHCI_NUM_COMMAND_SLOTS 31
#define AHCI_SUPPORTED_SPEED 20
#define AHCI_SUPPORTED_SPEED_GEN1 1
#define AHCI_VERSION_1_0 0x10000
#define AHCI_PROGMODE_MAJOR_REV_1 1
#define AHCI_COMMAND_TABLE_ACMD 0x40
#define IDE_FEATURE_DMA 1
#define READ_FPDMA_QUEUED 0x60
#define WRITE_FPDMA_QUEUED 0x61
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
#define RES_FIS_RFIS 0x40
#define RES_FIS_SDBFIS 0x58
#define RES_FIS_UFIS 0x60
typedef struct AHCIControlRegs {
uint32_t cap;
uint32_t ghc;
uint32_t irqstatus;
uint32_t impl;
uint32_t version;
} AHCIControlRegs;
typedef struct AHCIPortRegs {
uint32_t lst_addr;
uint32_t lst_addr_hi;
uint32_t fis_addr;
uint32_t fis_addr_hi;
uint32_t irq_stat;
uint32_t irq_mask;
uint32_t cmd;
uint32_t unused0;
uint32_t tfdata;
uint32_t sig;
uint32_t scr_stat;
uint32_t scr_ctl;
uint32_t scr_err;
uint32_t scr_act;
uint32_t cmd_issue;
uint32_t reserved;
} AHCIPortRegs;
typedef struct AHCICmdHdr {
uint32_t opts;
uint32_t status;
uint64_t tbl_addr;
uint32_t reserved[4];
} __attribute__ ((packed)) AHCICmdHdr;
typedef struct AHCI_SG {
uint64_t addr;
uint32_t reserved;
uint32_t flags_size;
} __attribute__ ((packed)) AHCI_SG;
typedef struct AHCIDevice AHCIDevice;
typedef struct NCQTransferState {
AHCIDevice *drive;
BlockDriverAIOCB *aiocb;
QEMUSGList sglist;
int is_read;
uint16_t sector_count;
uint64_t lba;
uint8_t tag;
int slot;
int used;
} NCQTransferState;
struct AHCIDevice {
IDEDMA dma;
IDEBus port;
int port_no;
uint32_t port_state;
uint32_t finished;
AHCIPortRegs port_regs;
struct AHCIState *hba;
QEMUBH *check_bh;
uint8_t *lst;
uint8_t *res_fis;
int dma_status;
int done_atapi_packet;
int busy_slot;
BlockDriverCompletionFunc *dma_cb;
AHCICmdHdr *cur_cmd;
NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
};
typedef struct AHCIState {
AHCIDevice dev[SATA_PORTS];
AHCIControlRegs control_regs;
int mem;
qemu_irq irq;
} AHCIState;
typedef struct AHCIPCIState {
PCIDevice card;
AHCIState ahci;
} AHCIPCIState;
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
uint8_t command;
uint8_t sector_count_low;
uint8_t lba0;
uint8_t lba1;
uint8_t lba2;
uint8_t fua;
uint8_t lba3;
uint8_t lba4;
uint8_t lba5;
uint8_t sector_count_high;
uint8_t tag;
uint8_t reserved5;
uint8_t reserved6;
uint8_t control;
uint8_t reserved7;
uint8_t reserved8;
uint8_t reserved9;
uint8_t reserved10;
} __attribute__ ((packed)) NCQFrame;
static void check_cmd(AHCIState *s, int port);
static int handle_cmd(AHCIState *s,int port,int slot);
static void ahci_reset_port(AHCIState *s, int port);
......@@ -1410,7 +1113,7 @@ static const IDEDMAOps ahci_dma_ops = {
.reset = ahci_dma_reset,
};
static void ahci_init(AHCIState *s, DeviceState *qdev)
void ahci_init(AHCIState *s, DeviceState *qdev)
{
qemu_irq *irqs;
int i;
......@@ -1434,7 +1137,7 @@ static void ahci_init(AHCIState *s, DeviceState *qdev)
}
}
static void ahci_pci_map(PCIDevice *pci_dev, int region_num,
void ahci_pci_map(PCIDevice *pci_dev, int region_num,
pcibus_t addr, pcibus_t size, int type)
{
struct AHCIPCIState *d = (struct AHCIPCIState *)pci_dev;
......@@ -1443,7 +1146,7 @@ static void ahci_pci_map(PCIDevice *pci_dev, int region_num,
cpu_register_physical_memory(addr, size, s->mem);
}
static void ahci_reset(void *opaque)
void ahci_reset(void *opaque)
{
struct AHCIPCIState *d = opaque;
int i;
......
hw/ide/ahci.h 0 → 100644
View file @ 03c7a6a8
#ifndef HW_IDE_AHCI_H
#define HW_IDE_AHCI_H
#define AHCI_PCI_BAR 5
#define AHCI_MAX_PORTS 32
#define AHCI_MAX_SG 168 /* hardware max is 64K */
#define AHCI_DMA_BOUNDARY 0xffffffff
#define AHCI_USE_CLUSTERING 0
#define AHCI_MAX_CMDS 32
#define AHCI_CMD_SZ 32
#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
#define AHCI_RX_FIS_SZ 256
#define AHCI_CMD_TBL_CDB 0x40
#define AHCI_CMD_TBL_HDR_SZ 0x80
#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
AHCI_RX_FIS_SZ)
#define AHCI_IRQ_ON_SG (1 << 31)
#define AHCI_CMD_ATAPI (1 << 5)
#define AHCI_CMD_WRITE (1 << 6)
#define AHCI_CMD_PREFETCH (1 << 7)
#define AHCI_CMD_RESET (1 << 8)
#define AHCI_CMD_CLR_BUSY (1 << 10)
#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
/* global controller registers */
#define HOST_CAP 0x00 /* host capabilities */
#define HOST_CTL 0x04 /* global host control */
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
/* HOST_CTL bits */
#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */
/* HOST_CAP bits */
#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */
/* registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
#define PORT_IRQ_STAT 0x10 /* interrupt status */
#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
#define PORT_CMD 0x18 /* port command */
#define PORT_TFDATA 0x20 /* taskfile data */
#define PORT_SIG 0x24 /* device TF signature */
#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
#define PORT_CMD_ISSUE 0x38 /* command issue */
#define PORT_RESERVED 0x3c /* reserved */
/* PORT_IRQ_{STAT,MASK} bits */
#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
PORT_IRQ_UNK_FIS)
#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
PORT_IRQ_HBUS_DATA_ERR)
#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
/* PORT_CMD bits */
#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
#define PORT_CMD_CLO (1 << 3) /* Command list override */
#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */
#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
Status */
#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
Status */
#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
Status */
#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */
/* ap->flags bits */
#define AHCI_FLAG_NO_NCQ (1 << 24)
#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
#define ATA_SRST (1 << 2) /* software reset */
#define STATE_RUN 0
#define STATE_RESET 1
#define SATA_SCR_SSTATUS_DET_NODEV 0x0
#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
#define AHCI_SCR_SCTL_DET 0xf
#define SATA_FIS_TYPE_REGISTER_H2D 0x27
#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
#define AHCI_CMD_HDR_PRDT_LEN 16
#define SATA_SIGNATURE_CDROM 0xeb140000
#define SATA_SIGNATURE_DISK 0x00000101
#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
/* Shouldn't this be 0x2c? */
#define SATA_PORTS 4
#define AHCI_PORT_REGS_START_ADDR 0x100
#define AHCI_PORT_REGS_END_ADDR (AHCI_PORT_REGS_START_ADDR + SATA_PORTS * 0x80)
#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
#define AHCI_NUM_COMMAND_SLOTS 31
#define AHCI_SUPPORTED_SPEED 20
#define AHCI_SUPPORTED_SPEED_GEN1 1
#define AHCI_VERSION_1_0 0x10000
#define AHCI_PROGMODE_MAJOR_REV_1 1
#define AHCI_COMMAND_TABLE_ACMD 0x40
#define IDE_FEATURE_DMA 1
#define READ_FPDMA_QUEUED 0x60
#define WRITE_FPDMA_QUEUED 0x61
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
#define RES_FIS_RFIS 0x40
#define RES_FIS_SDBFIS 0x58
#define RES_FIS_UFIS 0x60
typedef struct AHCIControlRegs {
uint32_t cap;
uint32_t ghc;
uint32_t irqstatus;
uint32_t impl;
uint32_t version;
} AHCIControlRegs;
typedef struct AHCIPortRegs {
uint32_t lst_addr;
uint32_t lst_addr_hi;
uint32_t fis_addr;
uint32_t fis_addr_hi;
uint32_t irq_stat;
uint32_t irq_mask;
uint32_t cmd;
uint32_t unused0;
uint32_t tfdata;
uint32_t sig;
uint32_t scr_stat;
uint32_t scr_ctl;
uint32_t scr_err;
uint32_t scr_act;
uint32_t cmd_issue;
uint32_t reserved;
} AHCIPortRegs;
typedef struct AHCICmdHdr {
uint32_t opts;
uint32_t status;
uint64_t tbl_addr;
uint32_t reserved[4];
} __attribute__ ((packed)) AHCICmdHdr;
typedef struct AHCI_SG {
uint64_t addr;
uint32_t reserved;
uint32_t flags_size;
} __attribute__ ((packed)) AHCI_SG;
typedef struct AHCIDevice AHCIDevice;
typedef struct NCQTransferState {
AHCIDevice *drive;
BlockDriverAIOCB *aiocb;
QEMUSGList sglist;
int is_read;
uint16_t sector_count;
uint64_t lba;
uint8_t tag;
int slot;
int used;
} NCQTransferState;
struct AHCIDevice {
IDEDMA dma;
IDEBus port;
int port_no;
uint32_t port_state;
uint32_t finished;
AHCIPortRegs port_regs;
struct AHCIState *hba;
QEMUBH *check_bh;
uint8_t *lst;
uint8_t *res_fis;
int dma_status;
int done_atapi_packet;
int busy_slot;
BlockDriverCompletionFunc *dma_cb;
AHCICmdHdr *cur_cmd;
NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
};
typedef struct AHCIState {
AHCIDevice dev[SATA_PORTS];
AHCIControlRegs control_regs;
int mem;
qemu_irq irq;
} AHCIState;
typedef struct AHCIPCIState {
PCIDevice card;
AHCIState ahci;
} AHCIPCIState;
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
uint8_t command;
uint8_t sector_count_low;
uint8_t lba0;
uint8_t lba1;
uint8_t lba2;
uint8_t fua;
uint8_t lba3;
uint8_t lba4;
uint8_t lba5;
uint8_t sector_count_high;
uint8_t tag;
uint8_t reserved5;
uint8_t reserved6;
uint8_t control;
uint8_t reserved7;
uint8_t reserved8;
uint8_t reserved9;