1. 18 Mar, 2015 1 commit
  2. 31 Oct, 2011 1 commit
  3. 17 May, 2009 3 commits
  4. 27 Mar, 2009 1 commit
  5. 23 Jul, 2008 3 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add ide_host_add() helper · 6f904d01
      Bartlomiej Zolnierkiewicz authored
      Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(),
      then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some
      host drivers to use it.
      While at it:
      * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c,
        macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value.
      * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c
        and pmac.c
      * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c
      * -1 -> -ENOMEM in ide-pnp.c
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add struct ide_host (take 3) · 48c3c107
      Bartlomiej Zolnierkiewicz authored
      * Add struct ide_host which keeps pointers to host's ports.
      * Add ide_host_alloc[_all]() and ide_host_remove() helpers.
      * Pass 'struct ide_host *host' instead of 'u8 *idx' to
        ide_device_add[_all]() and rename it to ide_host_register[_all]().
      * Convert host drivers and core code to use struct ide_host.
      * Remove no longer needed ide_find_port().
      * Make ide_find_port_slot() static.
      * Unexport ide_unregister().
      * Add missing 'struct ide_host *host' to macide.c.
      * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/)
        (Noticed by Stephen Rothwell).
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3) · c97c6aca
      Bartlomiej Zolnierkiewicz authored
      * Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert
        host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use
        it instead of calling ide_init_port_hw() directly.
        [ However if host has > 1 port we must still set hwif->chipset to hint
          consecutive ide_find_port() call that the previous slot is occupied. ]
      * Unexport ide_init_port_hw().
      * Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c.
        (Suggested by Geert Uytterhoeven)
      * Better patch description.
      * Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell)
      There should be no functional changes caused by this patch.
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  6. 16 Jul, 2008 2 commits
  7. 10 Jun, 2008 1 commit
  8. 27 Apr, 2008 1 commit
  9. 26 Apr, 2008 4 commits
  10. 17 Apr, 2008 1 commit
    • Bartlomiej Zolnierkiewicz's avatar
      ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3) · 93de00fd
      Bartlomiej Zolnierkiewicz authored
      hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
      and given the number of bugs we can assume that there are no real users:
      * DMA has no chance of working because DMA resources are released by
        ide_unregister() and they are never allocated again.
      * Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
        don't work for almost all hosts with "non-standard" (== non ISA-like)
        layout of IDE taskfile registers (there is a lot of such host drivers).
      * ide_port_init_devices() is not called when probing IDE devices so:
        - drive->autotune is never set and IDE host/devices are not programmed
          for the correct PIO/DMA transfer modes (=> possible data corruption)
        - host specific I/O 32-bit and IRQ unmasking settings are not applied
          (=> possible data corruption)
        - host specific ->port_init_devs method is not called (=> no luck with
          ht6560b, qd65xx and opti621 host drivers)
      * ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).
      * ->serialized flag is not preserved (=> possible data corruption when
         using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
         (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).
      * ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
        gayle and macide host drivers).
      * ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
        isn't initialized again (SiI3112 support needs them).
      * To issue an ioctl() there need to be at least one IDE device present
        in the system.
      * ->cable_detect method is not preserved + it is not called when probing
        IDE devices so cable detection is broken (however since DMA support is
        also broken it doesn't really matter ;-).
      * Some objects which may have already been freed in ide_unregister()
        are restored by ide_hwif_restore() (i.e. ->hwgroup).
      * ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
        slot cannot be found.
      * When IDE host drivers are modular unregistered port may be re-used by
        different host driver that owned it first causing subtle bugs.
      Since we now have a proper warm-plug support remove these ioctls,
      then remove no longer needed:
      - ide_register_hw() and ide_hwif_restore() functions
      - 'init_default' and 'restore' arguments of ide_unregister()
      - zeroeing of hwif->{dma,extra}_* fields in ide_unregister()
      As an added bonus IDE core code size shrinks by ~3kB (x86-32).
      * fix ide_unregister() arguments in cleanup_module() (Andrew Morton).
      * fix ide_unregister() arguments in palm_bk3710.c.
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  11. 02 Apr, 2008 1 commit
  12. 02 Feb, 2008 3 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: fix ide_unregister() usage in host drivers · 909f4369
      Bartlomiej Zolnierkiewicz authored
      * Don't set 'restore' flag for ide_unregister() when initializing new
      * Don't set 'init_default' and 'restore' flags for ide_unregister() when
        removing interface.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add 'init_default' and 'restore' arguments to ide_unregister() · f82c2b17
      Bartlomiej Zolnierkiewicz authored
      * Add 'init_default' (flag for calling init_hwif_default()) and 'restore'
        (flag for calling ide_hwif_restore()) arguments to ide_unregister().
      * Update ide_unregister() users to set 'init_default' and 'restore' flags.
      * No need to set 'init_default' flag in ide_register_hw() if the setup done
        by init_hwif_default() is going to be overridden by ide_init_port_hw().
      * No need to set 'init_default' and 'restore' flags in cleanup_module().
      There should be no functionality changes caused by this patch.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add struct ide_port_info instances to legacy host drivers · c413b9b9
      Bartlomiej Zolnierkiewicz authored
      * Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().
      * Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.
      * Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().
      * Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
        move it to ide-probe.c and call it in in ide_device_add_all() instead of
      * Move ->mate setup to ide_device_add_all() from ide_port_init().
      * Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
        ->autotune currently.
      * Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
        (to not override setup done by ide_hwif_configure()).
      * Add ETRAX host handling to ide_device_add_all().
      * cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.
      * pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
        setup to pmac_ide_setup_device().
      * Add 'struct ide_port_info' instances to legacy host drivers, pass them to
        ide_device_add() calls and then remove open-coded ports initialization.
      Reviewed-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  13. 01 Feb, 2008 1 commit
  14. 26 Jan, 2008 3 commits
    • Bartlomiej Zolnierkiewicz's avatar
      ide: make remaining built-in only IDE host drivers modular (take 2) · ade2daf9
      Bartlomiej Zolnierkiewicz authored
      * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
        file for probing PCI host drivers registered with IDE core (special case
        for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
        the ordering in which all IDE host drivers are probed when IDE is built-in
        during link time.
      * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
        specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
        arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).
      * Move probing of ide-cris (cris arch specific) host driver before cmd640
        (x86 arch specific).
      * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
        on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
        (h8300 arch specific).
      * Add "probe_vlb" kernel parameter to cmd640 host driver and update
        Documentation/ide.txt accordingly.
      * Make IDE_ARM config option visible so it can also be disabled if needed.
      * Remove bogus comment from ide.c while at it.
      * Fix two issues spotted by Sergei:
        - replace ENOMEM error value by ENOENT in ide-h8300 host driver
        - fix MODULE_PARM_DESC() in cmd640 host driver
      Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: fix host drivers depending on ide_generic to probe for interfaces (take 2) · 8ac4ce74
      Bartlomiej Zolnierkiewicz authored
      * Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().
      * Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,
        macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().
        This removes dependency on ide_generic for these drivers so update
        ide/Kconfig accordingly.
      * ide_arm build fix (s/ide_device_idx/ide_device_add/)
        (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem).
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: drop 'initializing' argument from ide_register_hw() · cbb010c1
      Bartlomiej Zolnierkiewicz authored
      * Rename init_hwif_data() to ide_init_port_data() and export it.
      * For all users of ide_register_hw() with 'initializing' argument set
        hwif->present and hwif->hold are always zero so convert these host
        drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()
        instead (also no need for init_hwif_default() call since the setup
        done by it gets over-ridden by ide_init_port_hw() call).
      * Drop 'initializing' argument from ide_register_hw().
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  15. 19 Oct, 2007 2 commits
    • Bartlomiej Zolnierkiewicz's avatar
      icside: use ec->dma directly · 86f3a492
      Bartlomiej Zolnierkiewicz authored
      * hwif->hwif_data contains pointer to struct expansion_card so use ec->dma
        directly instead of caching it in hwif->hw.dma.
      * Remove no longer needed hw_regs_t.dma and NO_DMA define.
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
    • Bartlomiej Zolnierkiewicz's avatar
      ide: add ->fixup method to ide_hwif_t · fd9bb539
      Bartlomiej Zolnierkiewicz authored
      * Add ->fixup method to ide_hwif_t.
      * Set hwif->fixup in ide_pci_setup_ports() to d->fixup.
      * Use hwif->fixup in probe_hwif().
      * Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in
      * Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup,
        update all ide_register_hw() users accordingly.
      * Convert ide-cs/delkin_cb host drivers to use ide_register_hw().
      * Restore hwif->fixup in ide_hwif_restore().
      * Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()
        and 'fixup' argument from probe_hwif().
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  16. 09 May, 2007 1 commit
  17. 27 Jan, 2007 1 commit
  18. 16 Apr, 2005 1 commit
    • Linus Torvalds's avatar
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds authored
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      Let it rip!