Commit ff85f707 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge 4.0-rc5 into char-misc-next

We want those fixes in here as well.
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parents e9533ae5 bc465aa9
......@@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
- power-domains: phandle pointing to the parent power domain, for more details
see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.
......
......@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
Boards with the ST STiH410 SoC shall have the following properties:
Required root node property:
compatible = "st,stih410";
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";
......
......@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
APM X-Gene SoC.
Required properties for all the ethernet interfaces:
- compatible: Should be "apm,xgene-enet"
- compatible: Should state binding information from the following list,
- "apm,xgene-enet": RGMII based 1G interface
- "apm,xgene1-sgenet": SGMII based 1G interface
- "apm,xgene1-xgenet": XFI based 10G interface
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names
- reg-names: Should contain the register set names
......
......@@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
Optional properties:
- power-domains : A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle.
Some power domains might be powered from another power domain (or have
other hardware specific dependencies). For representing such dependency
a standard PM domain consumer binding is used. When provided, all domains
created by the given provider should be subdomains of the domain
specified by this binding. More details about power domain specifier are
available in the next section.
Example:
power: power-controller@12340000 {
......@@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
Example 2:
parent: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12340000 0x1000>;
#power-domain-cells = <1>;
};
child: power-controller@12340000 {
compatible = "foo,power-controller";
reg = <0x12341000 0x1000>;
power-domains = <&parent 0>;
#power-domain-cells = <1>;
};
The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
==PM domain consumers==
Required properties:
......
ETRAX FS UART
Required properties:
- compatible : "axis,etraxfs-uart"
- reg: offset and length of the register set for the device.
- interrupts: device interrupt
Optional properties:
- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
line respectively.
Example:
serial@b00260000 {
compatible = "axis,etraxfs-uart";
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
};
......@@ -12,6 +12,9 @@ I. For patch submitters
devicetree@vger.kernel.org
and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
all of the DT maintainers.
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.
......
......@@ -20,6 +20,7 @@ amlogic Amlogic, Inc.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arasan Arasan Chip Systems
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
......@@ -27,6 +28,7 @@ atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.
......
......@@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
......
......@@ -1030,6 +1030,16 @@ F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE VYBRID ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
F: arch/arm/mach-imx/*vf610*
F: arch/arm/boot/dts/vf*
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......@@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
M: Gregory Clement <gregory.clement@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
......@@ -1730,7 +1741,7 @@ S: Maintained
F: drivers/net/ethernet/atheros/
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
M: Chas Williams <3chas3@gmail.com>
L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
......@@ -2107,7 +2118,6 @@ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Matt Porter <mporter@linaro.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
......@@ -2369,8 +2379,9 @@ F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
......@@ -2386,7 +2397,7 @@ CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
......@@ -10196,6 +10207,13 @@ S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OTG FSM (Finite State Machine)
M: Peter Chen <Peter.Chen@freescale.com>
T: git git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/common/usb-otg-fsm.c
USB OVER IP DRIVER
M: Valentina Manea <valentina.manea.m@gmail.com>
M: Shuah Khan <shuah.kh@samsung.com>
......
VERSION = 4
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
......
......@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
......
......@@ -301,3 +301,11 @@
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
};
&aes {
status = "okay";
};
&sham {
status = "okay";
};
......@@ -24,11 +24,3 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
......@@ -328,6 +328,10 @@
dual_emac_res_vlan = <3>;
};
&phy_sel {
rmii-clock-ext;
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
......
......@@ -99,7 +99,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
......@@ -107,7 +107,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
......@@ -115,7 +115,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
......
......@@ -107,7 +107,7 @@
ehrpwm0_tbclk: ehrpwm0_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
......@@ -115,7 +115,7 @@
ehrpwm1_tbclk: ehrpwm1_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
......@@ -123,7 +123,7 @@
ehrpwm2_tbclk: ehrpwm2_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
......@@ -131,7 +131,7 @@
ehrpwm3_tbclk: ehrpwm3_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
......@@ -139,7 +139,7 @@
ehrpwm4_tbclk: ehrpwm4_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
......@@ -147,7 +147,7 @@
ehrpwm5_tbclk: ehrpwm5_tbclk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_m2_ck>;
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};
......
......@@ -494,12 +494,12 @@
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */
<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */
<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
......@@ -853,7 +853,7 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
......@@ -976,7 +976,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -124,11 +124,12 @@
};
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&udc_clk>, <&udpck>;
clock-names = "usb_clk", "udc_clk", "udpck";
clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
};
......@@ -262,7 +263,7 @@
};
matrix: matrix@ffffee00 {
compatible = "atmel,at91sam9260-bus-matrix";
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
reg = <0xffffee00 0x200>;
};
......
......@@ -69,7 +69,7 @@
sram1: sram@00500000 {
compatible = "mmio-sram";
reg = <0x00300000 0x4000>;
reg = <0x00500000 0x4000>;
};
ahb {
......@@ -856,7 +856,7 @@
};
usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc";
compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>;
......@@ -905,7 +905,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -1116,7 +1116,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......@@ -1301,7 +1300,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
......
......@@ -894,7 +894,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......
......@@ -1066,7 +1066,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&usb>, <&udphs_clk>;
clocks = <&utmi>, <&udphs_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
......@@ -1130,7 +1130,6 @@
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
atmel,idle-halt;
status = "disabled";
};
......@@ -1186,7 +1185,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
......
......@@ -263,17 +263,15 @@
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
0x3d0 (MUX_MODE15) /* dcan1_tx.off */
0x3d4 (MUX_MODE15) /* dcan1_rx.off */
0x418 (MUX_MODE15) /* wakeup0.off */
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
};
......