Commit f928b53d authored by Chanwoo Choi's avatar Chanwoo Choi Committed by Lee Jones

clk: s2mps11: Add the support for S2MPS13 PMIC clock

This patch adds the support for S2MPS13 PMIC clock which is same with existing
S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}).
Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: default avatarMichael Turquette <mturquette@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 76b9840b
......@@ -23,6 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mfd/samsung/core.h>
......@@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
},
};
static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps13_ap",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
[S2MPS11_CLK_CP] = {
.name = "s2mps13_cp",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
[S2MPS11_CLK_BT] = {
.name = "s2mps13_bt",
.ops = &s2mps11_clk_ops,
.flags = CLK_IS_ROOT,
},
};
static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps14_ap",
......@@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
s2mps11_reg = S2MPS11_REG_RTC_CTRL;
clks_init = s2mps11_clks_init;
break;
case S2MPS13X:
s2mps11_reg = S2MPS13_REG_RTCCTRL;
clks_init = s2mps13_clks_init;
break;
case S2MPS14X:
s2mps11_reg = S2MPS14_REG_RTCCTRL;
clks_init = s2mps14_clks_init;
......@@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
static const struct platform_device_id s2mps11_clk_id[] = {
{ "s2mps11-clk", S2MPS11X},
{ "s2mps13-clk", S2MPS13X},
{ "s2mps14-clk", S2MPS14X},
{ "s5m8767-clk", S5M8767X},
{ },
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment