Commit e0af11fa authored by Samuel Ortiz's avatar Samuel Ortiz

NFC: microread: Add MEI physical layer

On some peculiar worlds, microreads are found hidden behind MEIs and needs
to be accessed through the ME bus.
Signed-off-by: 's avatarSamuel Ortiz <sameo@linux.intel.com>
parent 71054c7d
......@@ -22,3 +22,14 @@ config NFC_MICROREAD_I2C
If you choose to build a module, it'll be called microread_i2c.
Say N if unsure.
config NFC_MICROREAD_MEI
tristate "NFC Microread MEI support"
depends on NFC_MICROREAD && INTEL_MEI_BUS_NFC
---help---
This module adds support for the mei interface of adapters using
Inside microread chipsets. Select this if your microread chipset
is handled by Intel's Management Engine Interface on your platform.
If you choose to build a module, it'll be called microread_mei.
Say N if unsure.
......@@ -3,6 +3,8 @@
#
microread_i2c-objs = i2c.o
microread_mei-objs = mei.o
obj-$(CONFIG_NFC_MICROREAD) += microread.o
obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o
obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o
/*
* HCI based Driver for Inside Secure microread NFC Chip
*
* Copyright (C) 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/mei_bus.h>
#include <linux/nfc.h>
#include <net/nfc/hci.h>
#include <net/nfc/llc.h>
#include "microread.h"
#define MICROREAD_DRIVER_NAME "microread"
#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \
0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
struct mei_nfc_hdr {
u8 cmd;
u8 status;
u16 req_id;
u32 reserved;
u16 data_size;
} __attribute__((packed));
#define MEI_NFC_HEADER_SIZE 10
#define MEI_NFC_MAX_HCI_PAYLOAD 300
#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
struct microread_mei_phy {
struct mei_bus_client *client;
struct nfc_hci_dev *hdev;
int powered;
int hard_fault; /*
* < 0 if hardware error occured (e.g. i2c err)
* and prevents normal operation.
*/
};
#define MEI_DUMP_SKB_IN(info, skb) \
do { \
pr_debug("%s:\n", info); \
print_hex_dump(KERN_DEBUG, "mei in : ", DUMP_PREFIX_OFFSET, \
16, 1, (skb)->data, (skb)->len, 0); \
} while (0)
#define MEI_DUMP_SKB_OUT(info, skb) \
do { \
pr_debug("%s:\n", info); \
print_hex_dump(KERN_DEBUG, "mei out: ", DUMP_PREFIX_OFFSET, \
16, 1, (skb)->data, (skb)->len, 0); \
} while (0)
static int microread_mei_enable(void *phy_id)
{
struct microread_mei_phy *phy = phy_id;
pr_info(DRIVER_DESC ": %s\n", __func__);
phy->powered = 1;
return 0;
}
static void microread_mei_disable(void *phy_id)
{
struct microread_mei_phy *phy = phy_id;
pr_info(DRIVER_DESC ": %s\n", __func__);
phy->powered = 0;
}
/*
* Writing a frame must not return the number of written bytes.
* It must return either zero for success, or <0 for error.
* In addition, it must not alter the skb
*/
static int microread_mei_write(void *phy_id, struct sk_buff *skb)
{
struct microread_mei_phy *phy = phy_id;
int r;
MEI_DUMP_SKB_OUT("mei frame sent", skb);
r = mei_bus_send(phy->client, skb->data, skb->len);
if (r > 0)
r = 0;
return r;
}
static void microread_event_cb(struct mei_bus_client *client, u32 events,
void *context)
{
struct microread_mei_phy *phy = context;
if (phy->hard_fault != 0)
return;
if (events & BIT(MEI_BUS_EVENT_RX)) {
struct sk_buff *skb;
int reply_size;
skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
if (!skb)
return;
reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ);
if (reply_size < MEI_NFC_HEADER_SIZE) {
kfree(skb);
return;
}
skb_put(skb, reply_size);
skb_pull(skb, MEI_NFC_HEADER_SIZE);
MEI_DUMP_SKB_IN("mei frame read", skb);
nfc_hci_recv_frame(phy->hdev, skb);
}
}
static struct nfc_phy_ops mei_phy_ops = {
.write = microread_mei_write,
.enable = microread_mei_enable,
.disable = microread_mei_disable,
};
static int microread_mei_probe(struct mei_bus_client *client)
{
struct microread_mei_phy *phy;
int r;
pr_info("Probing NFC microread\n");
phy = kzalloc(sizeof(struct microread_mei_phy), GFP_KERNEL);
if (!phy) {
pr_err("Cannot allocate memory for microread mei phy.\n");
return -ENOMEM;
}
phy->client = client;
mei_bus_set_clientdata(client, phy);
r = mei_bus_register_event_cb(client, microread_event_cb, phy);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n");
goto err_out;
}
r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
&phy->hdev);
if (r < 0)
goto err_out;
return 0;
err_out:
kfree(phy);
return r;
}
static int microread_mei_remove(struct mei_bus_client *client)
{
struct microread_mei_phy *phy = mei_bus_get_clientdata(client);
pr_info("Removing microread\n");
microread_remove(phy->hdev);
if (phy->powered)
microread_mei_disable(phy);
kfree(phy);
return 0;
}
static struct mei_bus_driver microread_driver = {
.driver = {
.name = MICROREAD_DRIVER_NAME,
},
.id = {
.name = MICROREAD_DRIVER_NAME,
.uuid = MICROREAD_UUID,
},
.probe = microread_mei_probe,
.remove = microread_mei_remove,
};
static int microread_mei_init(void)
{
int r;
pr_debug(DRIVER_DESC ": %s\n", __func__);
r = mei_driver_register(&microread_driver);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
return r;
}
return 0;
}
static void microread_mei_exit(void)
{
mei_driver_unregister(&microread_driver);
}
module_init(microread_mei_init);
module_exit(microread_mei_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment