ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers

Do explicit port setup in legacy VLB host drivers instead of depending
on init_ide_data().  This way hwif->io_ports[] and hwif->irq are always
correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI.
Signed-off-by: 's avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent e4079df0
......@@ -200,6 +200,7 @@ static const struct ide_port_info ali14xx_port_info = {
static int __init ali14xx_probe(void)
{
static u8 idx[4] = { 0, 1, 0xff, 0xff };
hw_regs_t hw[2];
printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
basePort, regOn);
......@@ -210,6 +211,17 @@ static int __init ali14xx_probe(void)
return 1;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
ide_init_port_hw(&ide_hwifs[0], &hw[0]);
ide_init_port_hw(&ide_hwifs[1], &hw[1]);
ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode;
ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode;
......
......@@ -103,6 +103,7 @@ static int __init dtc2278_probe(void)
unsigned long flags;
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
hw_regs_t hw[2];
hwif = &ide_hwifs[0];
mate = &ide_hwifs[1];
......@@ -128,6 +129,17 @@ static int __init dtc2278_probe(void)
#endif
local_irq_restore(flags);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
ide_init_port_hw(hwif, &hw[0]);
ide_init_port_hw(mate, &hw[1]);
hwif->set_pio_mode = &dtc2278_set_pio_mode;
ide_device_add(idx, &dtc2278_port_info);
......
......@@ -340,6 +340,7 @@ static int __init ht6560b_init(void)
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
hw_regs_t hw[2];
if (probe_ht6560b == 0)
return -ENODEV;
......@@ -358,6 +359,17 @@ static int __init ht6560b_init(void)
goto release_region;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
ide_init_port_hw(hwif, &hw[0]);
ide_init_port_hw(mate, &hw[1]);
hwif->selectproc = &ht6560b_selectproc;
hwif->set_pio_mode = &ht6560b_set_pio_mode;
......
......@@ -13,6 +13,7 @@ static int __init ide_4drives_init(void)
{
ide_hwif_t *hwif, *mate;
u8 idx[4] = { 0, 1, 0xff, 0xff };
hw_regs_t hw;
if (probe_4drives == 0)
return -ENODEV;
......@@ -20,11 +21,14 @@ static int __init ide_4drives_init(void)
hwif = &ide_hwifs[0];
mate = &ide_hwifs[1];
memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
memset(&hw, 0, sizeof(hw));
mate->irq = hwif->irq;
ide_std_init_ports(&hw, 0x1f0, 0x3f6);
hw.irq = 14;
hw.chipset = ide_4drives;
mate->chipset = hwif->chipset = ide_4drives;
ide_init_port_hw(hwif, &hw);
ide_init_port_hw(mate, &hw);
mate->drives[0].select.all ^= 0x20;
mate->drives[1].select.all ^= 0x20;
......
......@@ -352,9 +352,9 @@ static const struct ide_port_info qd65xx_port_info __initdata = {
static int __init qd_probe(int base)
{
ide_hwif_t *hwif;
u8 config, unit;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
u8 config;
u8 unit;
hw_regs_t hw[2];
config = inb(QD_CONFIG_PORT);
......@@ -363,6 +363,14 @@ static int __init qd_probe(int base)
unit = ! (config & QD_CONFIG_IDE_BASEPORT);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
if ((config & 0xf0) == QD_CONFIG_QD6500) {
if (qd_testreg(base)) return 1; /* bad register */
......@@ -379,6 +387,8 @@ static int __init qd_probe(int base)
return 1;
}
ide_init_port_hw(hwif, &hw[unit]);
qd_setup(hwif, base, config);
hwif->port_init_devs = qd6500_port_init_devs;
......@@ -416,6 +426,8 @@ static int __init qd_probe(int base)
printk(KERN_INFO "%s: qd6580: single IDE board\n",
hwif->name);
ide_init_port_hw(hwif, &hw[unit]);
qd_setup(hwif, base, config | (control << 8));
hwif->port_init_devs = qd6580_port_init_devs;
......@@ -435,6 +447,9 @@ static int __init qd_probe(int base)
printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n",
hwif->name, mate->name);
ide_init_port_hw(hwif, &hw[0]);
ide_init_port_hw(mate, &hw[1]);
qd_setup(hwif, base, config | (control << 8));
hwif->port_init_devs = qd6580_port_init_devs;
......
......@@ -130,6 +130,7 @@ static int __init umc8672_probe(void)
{
unsigned long flags;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
hw_regs_t hw[2];
if (!request_region(0x108, 2, "umc8672")) {
printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
......@@ -148,6 +149,17 @@ static int __init umc8672_probe(void)
umc_set_speeds (current_speeds);
local_irq_restore(flags);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
ide_init_port_hw(&ide_hwifs[0], &hw[0]);
ide_init_port_hw(&ide_hwifs[1], &hw[1]);
ide_hwifs[0].set_pio_mode = &umc_set_pio_mode;
ide_hwifs[1].set_pio_mode = &umc_set_pio_mode;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment