Commit b9fa38f7 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (49 commits)
  [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore
  [POWERPC] bootwrapper: fix build error on virtex405-head.S
  [POWERPC] 4xx: Fix 460GT support to not enable FPU
  [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts
  [POWERPC] Xilinx: of_serial support for Xilinx uart 16550.
  [POWERPC] Xilinx: boot support for Xilinx uart 16550.
  [POWERPC] celleb: Add support for PCI Express
  [POWERPC] celleb: Move miscellaneous files for Beat
  [POWERPC] celleb: Move a file for SPU on Beat
  [POWERPC] celleb: Move files for Beat mmu and iommu
  [POWERPC] celleb: Move files for Beat hvcall interfaces
  [POWERPC] celleb: Move the SCC related code for celleb
  [POWERPC] celleb: Move the files for celleb base support
  [POWERPC] celleb: Consolidate io-workarounds code
  [POWERPC] cell: Generalize io-workarounds code
  [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries
  [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/
  [POWERPC] Register udbg console early on pseries LPAR
  [POWERPC] Mark udbg console as CON_ANYTIME, ie. callable early in boot
  [POWERPC] Set udbg_console index to 0
  ...
parents 6e18933f f360bf00
......@@ -2601,6 +2601,17 @@ platforms are moved over to use the flattened-device-tree model.
differ between different families. May be
'virtex2p', 'virtex4', or 'virtex5'.
vi) Xilinx Uart 16550
Xilinx UART 16550 devices are very similar to the NS16550 but with
different register spacing and an offset from the base address.
Requred properties:
- clock-frequency : Frequency of the clock input
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
p) Freescale Synchronous Serial Interface
The SSI is a serial device that communicates with audio codecs. It can
......
......@@ -1106,6 +1106,12 @@ M: kernel@wantstofly.org
L: linux-usb@vger.kernel.org
S: Maintained
CIRRUS LOGIC CS4270 SOUND DRIVER
P: Timur Tabi
M: timur@freescale.com
L: alsa-devel@alsa-project.org
S: Supported
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
P: Cirrus Logic Corporation (kernel 2.2 driver)
M: Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
......@@ -1628,6 +1634,12 @@ L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
FREESCALE QUICC ENGINE LIBRARY
P: Timur Tabi
M: timur@freescale.com
L: linuxppc-dev@ozlabs.org
S: Supported
FREESCALE HIGHSPEED USB DEVICE DRIVER
P: Li Yang
M: leoli@freescale.com
......@@ -1642,6 +1654,19 @@ L: netdev@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
FREESCALE QUICC ENGINE UCC UART DRIVER
P: Timur Tabi
M: timur@freescale.com
L: linuxppc-dev@ozlabs.org
S: Supported
FREESCALE SOC SOUND DRIVERS
P: Timur Tabi
M: timur@freescale.com
L: alsa-devel@alsa-project.org
L: linuxppc-dev@ozlabs.org
S: Supported
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
......
......@@ -626,20 +626,6 @@ config ADVANCED_OPTIONS
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
config HIGHMEM_START_BOOL
bool "Set high memory pool address"
depends on ADVANCED_OPTIONS && HIGHMEM
help
This option allows you to set the base address of the kernel virtual
area used to map high memory pages. This can be useful in
optimizing the layout of kernel virtual memory.
Say N here unless you know what you are doing.
config HIGHMEM_START
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
default "0xfe000000"
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
depends on ADVANCED_OPTIONS
......@@ -656,21 +642,76 @@ config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
help
This builds a kernel image that is capable of running at the
location the kernel is loaded at (some alignment restrictions may
exist).
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
kernel.
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the
load location of the kernel (eg. u-boot/mkimage).
config PAGE_OFFSET_BOOL
bool "Set custom page offset address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory. This can be useful in optimizing
the virtual memory layout of the system.
Say N here unless you know what you are doing.
config PAGE_OFFSET
hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
default "0xc0000000"
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory (the kernel image will be linked at
this address). This can be useful in optimizing the virtual memory
layout of the system.
the kernel will be loaded. Normally this should match PAGE_OFFSET
however there are times (like kdump) that one might not want them
to be the same.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default PAGE_OFFSET if PAGE_OFFSET_BOOL
default "0xc2000000" if CRASH_DUMP
default "0xc0000000"
config PHYSICAL_START_BOOL
bool "Set physical address where the kernel is loaded"
depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
help
This gives the physical address where the kernel is loaded.
Say N here unless you know what you are doing.
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
default "0x02000000" if PPC_STD_MMU && CRASH_DUMP
default "0x00000000"
config PHYSICAL_ALIGN
hex
default "0x10000000" if FSL_BOOKE
help
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
address which meets above alignment restriction.
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS
......@@ -717,9 +758,17 @@ config PIN_TLB
endmenu
if PPC64
config PAGE_OFFSET
hex
default "0xc000000000000000"
config KERNEL_START
hex
default "0xc000000002000000" if CRASH_DUMP
default "0xc000000000000000"
config PHYSICAL_START
hex
default "0x02000000" if CRASH_DUMP
default "0x00000000"
endif
source "net/Kconfig"
......
......@@ -27,6 +27,7 @@ zImage.chrp
zImage.coff
zImage.coff.lds
zImage.ep*
zImage.iseries
zImage.*lds
zImage.miboot
zImage.pmac
......
......@@ -40,7 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
zlib := inffast.c inflate.c inftrees.c
......
......@@ -142,8 +142,45 @@
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
interrupts = <6 4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
reg = <0 000000 4000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0 1e0000>;
};
partition@1e0000 {
label = "dtb";
reg = <1e0000 20000>;
};
partition@200000 {
label = "ramdisk";
reg = <200000 1400000>;
};
partition@1600000 {
label = "jffs2";
reg = <1600000 400000>;
};
partition@1a00000 {
label = "user";
reg = <1a00000 2560000>;
};
partition@3f60000 {
label = "env";
reg = <3f60000 40000>;
};
partition@3fa0000 {
label = "u-boot";
reg = <3fa0000 60000>;
};
};
};
UART0: serial@ef600300 {
......
......@@ -145,8 +145,45 @@
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
interrupts = <6 4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
reg = <0 000000 4000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0 1e0000>;
};
partition@1e0000 {
label = "dtb";
reg = <1e0000 20000>;
};
partition@200000 {
label = "ramdisk";
reg = <200000 1400000>;
};
partition@1600000 {
label = "jffs2";
reg = <1600000 400000>;
};
partition@1a00000 {
label = "user";
reg = <1a00000 2560000>;
};
partition@3f60000 {
label = "env";
reg = <3f60000 40000>;
};
partition@3fa0000 {
label = "u-boot";
reg = <3fa0000 60000>;
};
};
};
UART0: serial@ef600300 {
......
......@@ -55,10 +55,15 @@ static u8 ns16550_tstc(void)
int ns16550_console_init(void *devp, struct serial_console_data *scdp)
{
int n;
u32 reg_offset;
if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
return -1;
n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
if (n == sizeof(reg_offset))
reg_base += reg_offset;
n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
if (n != sizeof(reg_shift))
reg_shift = 0;
......
......@@ -106,4 +106,13 @@ PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
clean-files := vmlinux.lds
......@@ -93,10 +93,7 @@ int main(void)
DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
#ifdef CONFIG_PPC32
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
......@@ -165,13 +162,9 @@ int main(void)
/* Interrupt register frame */
DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
#ifndef CONFIG_PPC64
DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
#else /* CONFIG_PPC64 */
DEFINE(INT_FRAME_SIZE, STACK_INT_FRAME_SIZE);
#ifdef CONFIG_PPC64
DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
/* 288 = # of volatile regs, int & fp, for leaf routines */
/* which do not stack a frame. See the PPC64 ABI. */
DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288);
/* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
......
......@@ -33,7 +33,6 @@ _GLOBAL(__setup_cpu_440grx)
mtlr r4
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
b __init_fpu_44x
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
......
......@@ -17,7 +17,13 @@
#include <asm/cache.h>
_GLOBAL(__setup_cpu_603)
b setup_common_caches
mflr r4
BEGIN_FTR_SECTION
bl __init_fpu_registers
END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
bl setup_common_caches
mtlr r4
blr
_GLOBAL(__setup_cpu_604)
mflr r4
bl setup_common_caches
......
......@@ -37,7 +37,6 @@ extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
......@@ -1416,10 +1415,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_value = 0x13020000,
.cpu_name = "460GT",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_460gt,
.machine_check = machine_check_440A,
.platform = "ppc440",
},
......
......@@ -371,6 +371,17 @@ skpinv: addi r6,r6,1 /* Increment */
bl early_init
#ifdef CONFIG_RELOCATABLE
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
#ifdef CONFIG_PHYS_64BIT
stw r23,0(r3)
stw r25,4(r3)
#else
stw r25,0(r3)
#endif
#endif
mfspr r3,SPRN_TLB1CFG
andi. r3,r3,0xfff
lis r4,num_tlbcam_entries@ha
......
......@@ -152,7 +152,7 @@ _GLOBAL(low_choose_750fx_pll)
mtspr SPRN_HID1,r4
/* Store new HID1 image */
rlwinm r6,r1,0,0,18
rlwinm r6,r1,0,0,(31-THREAD_SHIFT)
lwz r6,TI_CPU(r6)
slwi r6,r6,2
addis r6,r6,nap_save_hid1@ha
......@@ -281,7 +281,7 @@ _GLOBAL(_tlbia)
#endif /* CONFIG_SMP */
#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
#if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18
rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
lwz r8,TI_CPU(r8)
oris r8,r8,10
mfmsr r10
......@@ -377,7 +377,7 @@ _GLOBAL(_tlbie)
#endif /* CONFIG_SMP */
#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
#if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18
rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
lwz r8,TI_CPU(r8)
oris r8,r8,11
mfmsr r10
......
......@@ -27,23 +27,11 @@
.text
_GLOBAL(get_msr)
mfmsr r3
blr
_GLOBAL(get_srr0)
mfsrr0 r3
blr
_GLOBAL(get_srr1)
mfsrr1 r3
blr
#ifdef CONFIG_IRQSTACKS
_GLOBAL(call_do_softirq)
mflr r0
std r0,16(r1)
stdu r1,THREAD_SIZE-112(r3)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
mr r1,r3
bl .__do_softirq
ld r1,0(r1)
......@@ -56,7 +44,7 @@ _GLOBAL(call_handle_irq)
mflr r0
std r0,16(r1)
mtctr r8
stdu r1,THREAD_SIZE-112(r5)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
mr r1,r5
bctrl
ld r1,0(r1)
......@@ -599,7 +587,7 @@ _GLOBAL(kexec_sequence)
std r0,16(r1)
/* switch stacks to newstack -- &kexec_stack.stack */
stdu r1,THREAD_SIZE-112(r3)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
mr r1,r3
li r0,0
......@@ -616,7 +604,7 @@ _GLOBAL(kexec_sequence)
std r26,-48(r1)
std r25,-56(r1)
stdu r1,-112-64(r1)
stdu r1,-STACK_FRAME_OVERHEAD-64(r1)
/* save args into preserved regs */
mr r31,r3 /* newstack (both) */
......
......@@ -275,6 +275,8 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
/* Scan the bus */
scan_phb(phb);
if (phb->bus == NULL)
return -ENXIO;
/* Claim resources. This might need some rework as well depending
* wether we are doing probe-only or not, like assigning unassigned
......
......@@ -7,17 +7,11 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/threads.h>
#include <linux/module.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
#include <asm/paca.h>
#include <asm/mmu.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
......@@ -65,60 +59,29 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
#define PACA_INIT(number) \
{ \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.hw_cpu_id = 0xffff, \
.slb_shadow_ptr = &slb_shadow[number], \
.__current = &init_task, \
}
struct paca_struct paca[] = {
PACA_INIT(0),
#if NR_CPUS > 1
PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3),
#if NR_CPUS > 4
PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7),
#if NR_CPUS > 8
PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11),
PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15),
PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19),
PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23),
PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27),
PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31),
#if NR_CPUS > 32
PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35),
PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39),
PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43),
PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47),
PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51),
PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55),
PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59),
PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63),
#if NR_CPUS > 64
PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67),
PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71),
PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75),
PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79),
PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83),
PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87),
PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91),
PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95),
PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99),
PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103),
PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107),
PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111),
PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115),
PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119),
PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123),
PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127),
#endif
#endif
#endif
#endif
#endif
};
struct paca_struct paca[NR_CPUS];
EXPORT_SYMBOL(paca);
void __init initialise_pacas(void)
{
int cpu;
/* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
* of the TOC can be addressed using a single machine instruction.
*/
unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL;
/* Can't use for_each_*_cpu, as they aren't functional yet */
for (cpu = 0; cpu < NR_CPUS; cpu++) {
struct paca_struct *new_paca = &paca[cpu];
new_paca->lppaca_ptr = &lppaca[cpu];
new_paca->lock_token = 0x8000;
new_paca->paca_index = cpu;
new_paca->kernel_toc = kernel_toc;
new_paca->hw_cpu_id = 0xffff;
new_paca->slb_shadow_ptr = &slb_shadow[cpu];
new_paca->__current = &init_task;
}
}
......@@ -135,6 +135,4 @@ struct ucontext32 {
struct mcontext32 uc_mcontext;
};
extern int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s);
#endif /* _PPC64_PPC32_H */
......@@ -1033,3 +1033,34 @@ void ppc64_runlatch_off(void)
}
}
#endif
#if THREAD_SHIFT < PAGE_SHIFT
static struct kmem_cache *thread_info_cache;
struct thread_info *alloc_thread_info(struct task_struct *tsk)
{
struct thread_info *ti;
ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
if (unlikely(ti == NULL))
return NULL;
#ifdef CONFIG_DEBUG_STACK_USAGE
memset(ti, 0, THREAD_SIZE);
#endif
return ti;
}
void free_thread_info(struct thread_info *ti)
{
kmem_cache_free(thread_info_cache, ti);
}
void thread_info_cache_init(void)
{
thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
THREAD_SIZE, 0, NULL);
BUG_ON(thread_info_cache == NULL);
}
#endif /* THREAD_SHIFT < PAGE_SHIFT */
......@@ -53,6 +53,7 @@
#include <asm/pci-bridge.h>
#include <asm/phyp_dump.h>
#include <asm/kexec.h>
#include <mm/mmu_decl.h>
#ifdef DEBUG
#define DBG(fmt...) printk(KERN_ERR fmt)
......@@ -978,7 +979,10 @@ static int __init early_init_dt_scan_memory(unsigned long node,
}
#endif
lmb_add(base, size);
memstart_addr = min((u64)memstart_addr, base);
}
return 0;
}
......
#!/bin/sh
#
# Copyright © 2008 IBM Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version
# 2 of the License, or (at your option) any later version.
# This script checks prom_init.o to see what external symbols it
# is using, if it finds symbols not in the whitelist it returns
# an error. The point of this is to discourage people from
# intentionally or accidentally adding new code to prom_init.c
# which has side effects on other parts of the kernel.