Commit b71bb863 authored by Johannes Thumshirn's avatar Johannes Thumshirn Committed by Greg Kroah-Hartman

mcb: Add PCI carrier for MEN Chameleon Bus

Add support for MCB over PCI devices. Both PCI attached on-board Chameleon FPGAs
as well as CompactPCI based MCB carrier cards are supported with this driver.
Signed-off-by: default avatarJohannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 3764e82e
......@@ -13,3 +13,17 @@ menuconfig MCB
for these devices.
If build as a module, the module is called mcb.ko
if MCB
config MCB_PCI
tristate "PCI based MCB carrier"
default m
help
This is a MCB carrier on a PCI device. Both PCI attached on-board
FPGAs as well as CompactPCI attached MCB FPGAs are supported with
this driver.
If build as a module, the module is called mcb-pci.ko
endif # MCB
......@@ -3,3 +3,5 @@ obj-$(CONFIG_MCB) += mcb.o
mcb-y += mcb-core.o
mcb-y += mcb-parse.o
obj-$(CONFIG_MCB_PCI) += mcb-pci.o
......@@ -3,6 +3,8 @@
#include <linux/types.h>
#define PCI_VENDOR_ID_MEN 0x1a88
#define PCI_DEVICE_ID_MEN_CHAMELEON 0x4d45
#define CHAMELEON_FILENAME_LEN 12
#define CHAMELEONV2_MAGIC 0xabce
......
/*
* MEN Chameleon Bus.
*
* Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
* Author: Johannes Thumshirn <johannes.thumshirn@men.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2 of the License.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/mcb.h>
#include "mcb-internal.h"
struct priv {
struct mcb_bus *bus;
void __iomem *base;
};
static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct priv *priv;
phys_addr_t mapbase;
int ret;
int num_cells;
unsigned long flags;
priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to enable PCI device\n");
return -ENODEV;
}
mapbase = pci_resource_start(pdev, 0);
if (!mapbase) {
dev_err(&pdev->dev, "No PCI resource\n");
goto err_start;
}
ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "Failed to request PCI BARs\n");
goto err_start;
}
priv->base = pci_iomap(pdev, 0, 0);
if (!priv->base) {
dev_err(&pdev->dev, "Cannot ioremap\n");
ret = -ENOMEM;
goto err_ioremap;
}
flags = pci_resource_flags(pdev, 0);
if (flags & IORESOURCE_IO) {
ret = -ENOTSUPP;
dev_err(&pdev->dev,
"IO mapped PCI devices are not supported\n");
goto err_ioremap;
}
pci_set_drvdata(pdev, priv);
priv->bus = mcb_alloc_bus();
ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
if (ret < 0)
goto err_drvdata;
num_cells = ret;
dev_dbg(&pdev->dev, "Found %d cells\n", num_cells);
mcb_bus_add_devices(priv->bus);
err_drvdata:
pci_iounmap(pdev, priv->base);
err_ioremap:
pci_release_region(pdev, 0);
err_start:
pci_disable_device(pdev);
return ret;
}
static void mcb_pci_remove(struct pci_dev *pdev)
{
struct priv *priv = pci_get_drvdata(pdev);
mcb_release_bus(priv->bus);
}
static const struct pci_device_id mcb_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MEN, PCI_DEVICE_ID_MEN_CHAMELEON) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, mcb_pci_tbl);
static struct pci_driver mcb_pci_driver = {
.name = "mcb-pci",
.id_table = mcb_pci_tbl,
.probe = mcb_pci_probe,
.remove = mcb_pci_remove,
};
module_pci_driver(mcb_pci_driver);
MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MCB over PCI support");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment