Commit aa1acb04 authored by hongbo.zhang's avatar hongbo.zhang Committed by Zhang Rui

Thermal: Add ST-Ericsson DB8500 thermal driver.

This driver is based on the thermal management framework in thermal_sys.c. A
thermal zone device is created with the trip points to which cooling devices
can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
clipped down to cool the CPU, and other cooling devices can be added and bound
to the trip points dynamically.  The platform specific PRCMU interrupts are
used to active thermal update when trip points are reached.
Signed-off-by: default avatarhongbo.zhang <hongbo.zhang@linaro.com>
Reviewed-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: default avatarFrancesco Lavra <francescolavra.fl@gmail.com>
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
parent 445110e9
* ST-Ericsson DB8500 Thermal
** Thermal node properties:
- compatible : "stericsson,db8500-thermal";
- reg : address range of the thermal sensor registers;
- interrupts : interrupts generated from PRCMU;
- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH";
- num-trips : number of total trip points, this is required, set it 0 if none,
if greater than 0, the following properties must be defined;
- tripN-temp : temperature of trip point N, should be in ascending order;
- tripN-type : type of trip point N, should be one of "active" "passive" "hot"
"critical";
- tripN-cdev-num : number of the cooling devices which can be bound to trip
point N, this is required if trip point N is defined, set it 0 if none,
otherwise the following cooling device names must be defined;
- tripN-cdev-nameM : name of the No. M cooling device of trip point N;
Usually the num-trips and tripN-*** are separated in board related dts files.
Example:
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
interrupts = <21 0x4>, <22 0x4>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
num-trips = <3>;
trip0-temp = <75000>;
trip0-type = "active";
trip0-cdev-num = <1>;
trip0-cdev-name0 = "thermal-cpufreq-0";
trip1-temp = <80000>;
trip1-type = "active";
trip1-cdev-num = <2>;
trip1-cdev-name0 = "thermal-cpufreq-0";
trip1-cdev-name1 = "thermal-fan";
trip2-temp = <85000>;
trip2-type = "critical";
trip2-cdev-num = <0>;
}
......@@ -101,5 +101,25 @@ config EXYNOS_THERMAL
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS series of SoC.
config DB8500_THERMAL
bool "DB8500 thermal management"
depends on ARCH_U8500
default y
help
Adds DB8500 thermal management implementation according to the thermal
management framework. A thermal zone with several trip points will be
created. Cooling devices can be bound to the trip points to cool this
thermal zone if trip points reached.
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500
depends on CPU_THERMAL
default y
help
Adds DB8500 cpufreq cooling devices, and these cooling devices can be
bound to thermal zone trip points. When a trip point reached, the
bound cpufreq cooling device turns active to set CPU frequency low to
cool down the CPU.
endif
......@@ -16,3 +16,5 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
/*
* db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
*
* Copyright (C) 2012 ST-Ericsson
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Hongbo Zhang <hongbo.zhang@linaro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
struct cpumask mask_val;
/* make sure cpufreq driver has been initialized */
if (!cpufreq_frequency_get_table(0))
return -EPROBE_DEFER;
cpumask_set_cpu(0, &mask_val);
cdev = cpufreq_cooling_register(&mask_val);
if (IS_ERR_OR_NULL(cdev)) {
dev_err(&pdev->dev, "Failed to register cooling device\n");
return PTR_ERR(cdev);
}
platform_set_drvdata(pdev, cdev);
dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type);
return 0;
}
static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
cpufreq_cooling_unregister(cdev);
return 0;
}
static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
pm_message_t state)
{
return -ENOSYS;
}
static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
{
return -ENOSYS;
}
#ifdef CONFIG_OF
static const struct of_device_id db8500_cpufreq_cooling_match[] = {
{ .compatible = "stericsson,db8500-cpufreq-cooling" },
{},
};
#else
#define db8500_cpufreq_cooling_match NULL
#endif
static struct platform_driver db8500_cpufreq_cooling_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "db8500-cpufreq-cooling",
.of_match_table = db8500_cpufreq_cooling_match,
},
.probe = db8500_cpufreq_cooling_probe,
.suspend = db8500_cpufreq_cooling_suspend,
.resume = db8500_cpufreq_cooling_resume,
.remove = db8500_cpufreq_cooling_remove,
};
static int __init db8500_cpufreq_cooling_init(void)
{
return platform_driver_register(&db8500_cpufreq_cooling_driver);
}
static void __exit db8500_cpufreq_cooling_exit(void)
{
platform_driver_unregister(&db8500_cpufreq_cooling_driver);
}
/* Should be later than db8500_cpufreq_register */
late_initcall(db8500_cpufreq_cooling_init);
module_exit(db8500_cpufreq_cooling_exit);
MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
MODULE_LICENSE("GPL");
This diff is collapsed.
/*
* db8500_thermal.h - DB8500 Thermal Management Implementation
*
* Copyright (C) 2012 ST-Ericsson
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Hongbo Zhang <hongbo.zhang@linaro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _DB8500_THERMAL_H_
#define _DB8500_THERMAL_H_
#include <linux/thermal.h>
#define COOLING_DEV_MAX 8
struct db8500_trip_point {
unsigned long temp;
enum thermal_trip_type type;
char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH];
};
struct db8500_thsens_platform_data {
struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS];
int num_trips;
};
#endif /* _DB8500_THERMAL_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment