Commit 943ffb58 authored by Adrian Bunk's avatar Adrian Bunk Committed by Adrian Bunk

spelling: s/retreive/retrieve/

Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 54069588
......@@ -185,7 +185,7 @@ VII. Getting Parameters
ENOMEM Kernel memory allocation error
A return value of 0 does not mean that the value was actually
properly retreived. The user should check the result list
properly retrieved. The user should check the result list
to determine the specific status of the transaction.
VIII. Downloading Software
......
......@@ -972,7 +972,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
#endif
#ifdef CONFIG_PPC_RTAS
/* To help early debugging via the front panel, we retreive a minimal
/* To help early debugging via the front panel, we retrieve a minimal
* set of RTAS infos now if available
*/
{
......
......@@ -632,7 +632,7 @@ void rtas_stop_self(void)
}
/*
* Call early during boot, before mem init or bootmem, to retreive the RTAS
* Call early during boot, before mem init or bootmem, to retrieve the RTAS
* informations from the device-tree and allocate the RMO buffer for userland
* accesses.
*/
......
......@@ -438,7 +438,7 @@ void __init setup_system(void)
/*
* Fill the ppc64_caches & systemcfg structures with informations
* retreived from the device-tree. Need to be called before
* retrieved from the device-tree. Need to be called before
* finish_device_tree() since the later requires some of the
* informations filled up here to properly parse the interrupt
* tree.
......
......@@ -368,7 +368,7 @@ static unsigned long __init htab_get_table_size(void)
unsigned long mem_size, rnd_mem_size, pteg_count;
/* If hash size isn't already provided by the platform, we try to
* retreive it from the device-tree. If it's not there neither, we
* retrieve it from the device-tree. If it's not there neither, we
* calculate it now based on the total RAM size
*/
if (ppc64_pft_size == 0)
......
......@@ -80,7 +80,7 @@ static struct freq_attr* g5_cpu_freqs_attr[] = {
};
/* Power mode data is an array of the 32 bits PCR values to use for
* the various frequencies, retreived from the device-tree
* the various frequencies, retrieved from the device-tree
*/
static u32 *g5_pmode_data;
static int g5_pmode_max;
......
......@@ -630,12 +630,12 @@ static int read_eeprom(int cpu, struct mpu_data *out)
sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0);
np = of_find_node_by_path(nodename);
if (np == NULL) {
printk(KERN_ERR "therm_pm72: Failed to retreive cpuid node from device-tree\n");
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid node from device-tree\n");
return -ENODEV;
}
data = (u8 *)get_property(np, "cpuid", &len);
if (data == NULL) {
printk(KERN_ERR "therm_pm72: Failed to retreive cpuid property from device-tree\n");
printk(KERN_ERR "therm_pm72: Failed to retrieve cpuid property from device-tree\n");
of_node_put(np);
return -ENODEV;
}
......
......@@ -26,7 +26,7 @@
* (typically the drive fan)
* - the main control (first control) gets the target value scaled with
* the first pair of factors, and is then modified as below
* - the value of the target of the CPU Fan control loop is retreived,
* - the value of the target of the CPU Fan control loop is retrieved,
* scaled with the second pair of factors, and the max of that and
* the scaled target is applied to the main control.
*
......
......@@ -185,7 +185,7 @@ VII. Getting Parameters
ENOMEM Kernel memory allocation error
A return value of 0 does not mean that the value was actually
properly retreived. The user should check the result list
properly retrieved. The user should check the result list
to determine the specific status of the transaction.
VIII. Downloading Software
......
......@@ -276,7 +276,7 @@ static void hp100_RegisterDump(struct net_device *dev);
* Convert an address in a kernel buffer to a bus/phys/dma address.
* This work *only* for memory fragments part of lp->page_vaddr,
* because it was properly DMA allocated via pci_alloc_consistent(),
* so we just need to "retreive" the original mapping to bus/phys/dma
* so we just need to "retrieve" the original mapping to bus/phys/dma
* address - Jean II */
static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
{
......
......@@ -357,7 +357,7 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
} while (retval != 5 && retval != ENODEV);
if (retval != 5) {
err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
......
......@@ -423,7 +423,7 @@ static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
/*
* Probe display on both primary and secondary card's connector (if any)
* by various available techniques (i2c, OF device tree, BIOS, ...) and
* try to retreive EDID. The algorithm here comes from XFree's radeon
* try to retrieve EDID. The algorithm here comes from XFree's radeon
* driver
*/
void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
......
......@@ -16,7 +16,7 @@ obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o
# How to generate logo's
# Use logo-cfiles to retreive list of .c files to be built
# Use logo-cfiles to retrieve list of .c files to be built
logo-cfiles = $(notdir $(patsubst %.$(2), %.c, \
$(wildcard $(srctree)/$(src)/*$(1).$(2))))
......
......@@ -663,7 +663,7 @@ v9fs_vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
}
/**
* v9fs_vfs_getattr - retreive file metadata
* v9fs_vfs_getattr - retrieve file metadata
* @mnt - mount information
* @dentry - file to get attributes on
* @stat - metadata structure to populate
......
......@@ -22,7 +22,7 @@
/*
* Partition info commands
*
* These commands are used to retreive the sdb-partition-XX datas from
* These commands are used to retrieve the sdb-partition-XX datas from
* the SMU. The lenght is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
......@@ -225,7 +225,7 @@
*
* SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
* transfer blocks of data from the SMU. So far, I've decrypted it's
* usage to retreive partition data. In order to do that, you have to
* usage to retrieve partition data. In order to do that, you have to
* break your transfer in "chunks" since that command cannot transfer
* more than a chunk at a time. The chunk size used by OF is 0xe bytes,
* but it seems that the darwin driver will let you do 0x1e bytes if
......@@ -556,7 +556,7 @@ struct smu_user_cmd_hdr
__u32 cmdtype;
#define SMU_CMDTYPE_SMU 0 /* SMU command */
#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
#define SMU_CMDTYPE_GET_PARTITION 2 /* retreive an sdb partition */
#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
......
......@@ -30,7 +30,7 @@
# - See include/linux/module.h for more details
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retreived from the Module.symers file.
# where the CRC of each module is retrieved from the Module.symers file.
.PHONY: _modpost
_modpost: __modpost
......
#!/bin/sh -x
# Based on the vmlinux file create the System.map file
# System.map is used by module-init tools and some debugging
# tools to retreive the actual addresses of symbols in the kernel.
# tools to retrieve the actual addresses of symbols in the kernel.
#
# Usage
# mksysmap vmlinux System.map
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment