cy82c693: remove no longer needed CY82C693_DEBUG_LOGS code

Having CY82C693_DEBUG_INFO is enough nowadays.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 00bb2c16
...@@ -53,7 +53,6 @@ ...@@ -53,7 +53,6 @@
/* /*
* The following are used to debug the driver. * The following are used to debug the driver.
*/ */
#define CY82C693_DEBUG_LOGS 0
#define CY82C693_DEBUG_INFO 0 #define CY82C693_DEBUG_INFO 0
/* /*
...@@ -172,17 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) ...@@ -172,17 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
#if CY82C693_DEBUG_LOGS
/* for debug let's show the previous values */
outb(index, CY82_INDEX_PORT);
data = inb(CY82_DATA_PORT);
printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
drive->name, HWIF(drive)->channel, drive->select.b.unit,
(data&0x3), ((data>>2)&1));
#endif /* CY82C693_DEBUG_LOGS */
data = (mode & 3) | (single << 2); data = (mode & 3) | (single << 2);
outb(index, CY82_INDEX_PORT); outb(index, CY82_INDEX_PORT);
...@@ -232,45 +220,6 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) ...@@ -232,45 +220,6 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
} }
} }
#if CY82C693_DEBUG_LOGS
/* for debug let's show the register values */
if (drive->select.b.unit == 0) {
/*
* get master drive registers
* address setup control register
* is 32 bit !!!
*/
pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
addrCtrl &= 0x0F;
/* now let's get the remaining registers */
pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r);
pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w);
pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8);
} else {
/*
* set slave drive registers
* address setup control register
* is 32 bit !!!
*/
pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
addrCtrl &= 0xF0;
addrCtrl >>= 4;
/* now let's get the remaining registers */
pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r);
pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w);
pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8);
}
printk(KERN_INFO "%s (ch=%d, dev=%d): PIO timing is "
"(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
drive->name, hwif->channel, drive->select.b.unit,
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_LOGS */
/* let's calc the values for this PIO mode */ /* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk); compute_clocks(pio, &pclk);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment