Commit 831bfb0e authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

qed*: Tx-switching configuration

Device should be configured by default to VEB once VFs are active.
This changes the configuration of both PFs' and VFs' vports into enabling
tx-switching once sriov is enabled.
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 73390ac9
......@@ -688,7 +688,8 @@ static int qed_hw_init_pf(struct qed_hwfn *p_hwfn,
qed_int_igu_enable(p_hwfn, p_ptt, int_mode);
/* send function start command */
rc = qed_sp_pf_start(p_hwfn, p_tunn, p_hwfn->cdev->mf_mode);
rc = qed_sp_pf_start(p_hwfn, p_tunn, p_hwfn->cdev->mf_mode,
allow_npar_tx_switch);
if (rc)
DP_NOTICE(p_hwfn, "Function start ramrod failed\n");
}
......
......@@ -99,6 +99,8 @@ int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn,
break;
}
p_ramrod->tx_switching_en = p_params->tx_switching;
/* Software Function ID in hwfn (PFs are 0 - 15, VFs are 16 - 135) */
p_ramrod->sw_fid = qed_concrete_to_sw_fid(p_hwfn->cdev,
p_params->concrete_fid);
......@@ -1792,6 +1794,8 @@ static int qed_update_vport(struct qed_dev *cdev,
params->update_vport_active_flg;
sp_params.vport_active_rx_flg = params->vport_active_flg;
sp_params.vport_active_tx_flg = params->vport_active_flg;
sp_params.update_tx_switching_flg = params->update_tx_switching_flg;
sp_params.tx_switching_flg = params->tx_switching_flg;
sp_params.accept_any_vlan = params->accept_any_vlan;
sp_params.update_accept_any_vlan_flg =
params->update_accept_any_vlan_flg;
......
......@@ -94,6 +94,7 @@ enum qed_tpa_mode {
struct qed_sp_vport_start_params {
enum qed_tpa_mode tpa_mode;
bool remove_inner_vlan;
bool tx_switching;
bool only_untagged;
bool drop_ttl0;
u8 max_buffers_per_cqe;
......
......@@ -216,6 +216,7 @@ int qed_fill_dev_info(struct qed_dev *cdev,
dev_info->fw_rev = FW_REVISION_VERSION;
dev_info->fw_eng = FW_ENGINEERING_VERSION;
dev_info->mf_mode = cdev->mf_mode;
dev_info->tx_switching = true;
} else {
qed_vf_get_fw_version(&cdev->hwfns[0], &dev_info->fw_major,
&dev_info->fw_minor, &dev_info->fw_rev,
......
......@@ -344,13 +344,14 @@ int qed_sp_init_request(struct qed_hwfn *p_hwfn,
* @param p_hwfn
* @param p_tunn
* @param mode
* @param allow_npar_tx_switch
*
* @return int
*/
int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
struct qed_tunn_start_params *p_tunn,
enum qed_mf_mode mode);
enum qed_mf_mode mode, bool allow_npar_tx_switch);
/**
* @brief qed_sp_pf_stop - PF Function Stop Ramrod
......
......@@ -299,7 +299,7 @@ qed_tunn_set_pf_start_params(struct qed_hwfn *p_hwfn,
int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
struct qed_tunn_start_params *p_tunn,
enum qed_mf_mode mode)
enum qed_mf_mode mode, bool allow_npar_tx_switch)
{
struct pf_start_ramrod_data *p_ramrod = NULL;
u16 sb = qed_int_get_sp_sb_id(p_hwfn);
......@@ -358,6 +358,9 @@ int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
&p_ramrod->tunnel_config);
p_hwfn->hw_info.personality = PERSONALITY_ETH;
if (IS_MF_SI(p_hwfn))
p_ramrod->allow_npar_tx_switching = allow_npar_tx_switch;
if (p_hwfn->cdev->p_iov_info) {
struct qed_hw_sriov_info *p_iov = p_hwfn->cdev->p_iov_info;
......
......@@ -1490,6 +1490,7 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
params.tpa_mode = start->tpa_mode;
params.remove_inner_vlan = start->inner_vlan_removal;
params.tx_switching = true;
params.only_untagged = vf_info->bulletin.p_virt->default_only_untagged;
params.drop_ttl0 = false;
......
......@@ -633,6 +633,18 @@ int qed_vf_pf_vport_update(struct qed_hwfn *p_hwfn,
}
}
if (p_params->update_tx_switching_flg) {
struct vfpf_vport_update_tx_switch_tlv *p_tx_switch_tlv;
size = sizeof(struct vfpf_vport_update_tx_switch_tlv);
tlv = CHANNEL_TLV_VPORT_UPDATE_TX_SWITCH;
p_tx_switch_tlv = qed_add_tlv(p_hwfn, &p_iov->offset,
tlv, size);
resp_size += sizeof(struct pfvf_def_resp_tlv);
p_tx_switch_tlv->tx_switching = p_params->tx_switching_flg;
}
if (p_params->update_approx_mcast_flg) {
struct vfpf_vport_update_mcast_bin_tlv *p_mcast_tlv;
......
......@@ -137,10 +137,26 @@ static int qede_set_vf_mac(struct net_device *ndev, int vfidx, u8 *mac)
static int qede_sriov_configure(struct pci_dev *pdev, int num_vfs_param)
{
struct qede_dev *edev = netdev_priv(pci_get_drvdata(pdev));
struct qed_dev_info *qed_info = &edev->dev_info.common;
int rc;
DP_VERBOSE(edev, QED_MSG_IOV, "Requested %d VFs\n", num_vfs_param);
return edev->ops->iov->configure(edev->cdev, num_vfs_param);
rc = edev->ops->iov->configure(edev->cdev, num_vfs_param);
/* Enable/Disable Tx switching for PF */
if ((rc == num_vfs_param) && netif_running(edev->ndev) &&
qed_info->mf_mode != QED_MF_NPAR && qed_info->tx_switching) {
struct qed_update_vport_params params;
memset(&params, 0, sizeof(params));
params.vport_id = 0;
params.update_tx_switching_flg = 1;
params.tx_switching_flg = num_vfs_param ? 1 : 0;
edev->ops->vport_update(edev->cdev, &params);
}
return rc;
}
#endif
......@@ -3291,6 +3307,12 @@ static int qede_start_queues(struct qede_dev *edev)
vport_update_params.update_vport_active_flg = 1;
vport_update_params.vport_active_flg = 1;
if ((qed_info->mf_mode == QED_MF_NPAR || pci_num_vf(edev->pdev)) &&
qed_info->tx_switching) {
vport_update_params.update_tx_switching_flg = 1;
vport_update_params.tx_switching_flg = 1;
}
/* Fill struct with RSS params */
if (QEDE_RSS_CNT(edev) > 1) {
vport_update_params.update_rss_flg = 1;
......
......@@ -35,6 +35,8 @@ struct qed_update_vport_params {
u8 vport_id;
u8 update_vport_active_flg;
u8 vport_active_flg;
u8 update_tx_switching_flg;
u8 tx_switching_flg;
u8 update_accept_any_vlan_flg;
u8 accept_any_vlan;
u8 update_rss_flg;
......
......@@ -93,6 +93,7 @@ struct qed_dev_info {
u32 flash_size;
u8 mf_mode;
bool tx_switching;
};
enum qed_sb_type {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment