ide: add generic ATA/ATAPI disk driver

* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()
Acked-by: 's avatarBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: 's avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 79cb3803
......@@ -84,21 +84,40 @@ config BLK_DEV_IDE_SATA
If unsure, say N.
config BLK_DEV_IDEDISK
tristate "Include IDE/ATA-2 DISK support"
---help---
This will include enhanced support for MFM/RLL/IDE hard disks. If
you have a MFM/RLL/IDE disk, and there is no special reason to use
the old hard disk driver instead, say Y. If you have an SCSI-only
system, you can say N here.
config IDE_GD
tristate "generic ATA/ATAPI disk support"
default y
help
Support for ATA/ATAPI disks (including ATAPI floppy drives).
To compile this driver as a module, choose M here: the
module will be called ide-disk.
Do not compile this driver as a module if your root file system
(the one containing the directory /) is located on the IDE disk.
To compile this driver as a module, choose M here.
The module will be called ide-gd_mod.
If unsure, say Y.
config IDE_GD_ATA
bool "ATA disk support"
depends on IDE_GD
default y
help
This will include support for ATA hard disks.
If unsure, say Y.
config IDE_GD_ATAPI
bool "ATAPI floppy support"
depends on IDE_GD
select IDE_ATAPI
help
This will include support for ATAPI floppy drives
(i.e. Iomega ZIP or MKE LS-120).
For information about jumper settings and the question
of when a ZIP drive uses a partition table, see
<http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
If unsure, say N.
config BLK_DEV_IDECS
tristate "PCMCIA IDE support"
depends on PCMCIA
......@@ -163,29 +182,6 @@ config BLK_DEV_IDETAPE
To compile this driver as a module, choose M here: the
module will be called ide-tape.
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
select IDE_ATAPI
---help---
If you have an IDE floppy drive which uses the ATAPI protocol,
answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
drives, similar to the SCSI protocol.
The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
this driver. For information about jumper settings and the question
of when a ZIP drive uses a partition table, see
<http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
(ATAPI PD-CD/CDR drives are not supported by this driver; support
for PD-CD/CDR drives is available if you answer Y to
"SCSI emulation support", below).
If you say Y here, the FLOPPY drive will be identified along with
other IDE devices, as "hdb" or "hdc", or something similar (check
the boot messages with dmesg).
To compile this driver as a module, choose M here: the
module will be called ide-floppy.
config BLK_DEV_IDESCSI
tristate "SCSI emulation support (DEPRECATED)"
depends on SCSI
......
......@@ -37,18 +37,25 @@ obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-disk_mod-y += ide-gd.o ide-disk.o ide-disk_ioctl.o
ide-gd_mod-y += ide-gd.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-floppy_mod-y += ide-gd-floppy.o ide-floppy.o ide-floppy_ioctl.o
ifeq ($(CONFIG_IDE_GD_ATA), y)
ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide-disk_mod-y += ide-disk_proc.o
ide-floppy_mod-y += ide-floppy_proc.o
ide-gd_mod-y += ide-disk_proc.o
endif
endif
ifeq ($(CONFIG_IDE_GD_ATAPI), y)
ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide-gd_mod-y += ide-floppy_proc.o
endif
endif
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk_mod.o
obj-$(CONFIG_IDE_GD) += ide-gd_mod.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
ifeq ($(CONFIG_BLK_DEV_IDECS), y)
......
......@@ -184,8 +184,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
* 1073741822 == 549756 MB or 48bit addressing fake drive
*/
ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -333,7 +333,7 @@ static void idedisk_check_hpa(ide_drive_t *drive)
}
}
void ide_disk_init_capacity(ide_drive_t *drive)
static int ide_disk_get_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
int lba;
......@@ -382,6 +382,8 @@ void ide_disk_init_capacity(ide_drive_t *drive)
} else
drive->dev_flags &= ~IDE_DFLAG_LBA48;
}
return 0;
}
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
......@@ -590,7 +592,12 @@ ide_ext_devset_rw(wcache, wcache);
ide_ext_devset_rw_sync(nowerr, nowerr);
void ide_disk_setup(ide_drive_t *drive)
static int ide_disk_check(ide_drive_t *drive, const char *s)
{
return 1;
}
static void ide_disk_setup(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
......@@ -626,7 +633,7 @@ void ide_disk_setup(ide_drive_t *drive)
drive->queue->max_sectors / 2);
/* calculate drive capacity, and select LBA if possible */
ide_disk_init_capacity(drive);
ide_disk_get_capacity(drive);
/*
* if possible, give fdisk access to more of the drive,
......@@ -682,7 +689,7 @@ void ide_disk_setup(ide_drive_t *drive)
drive->dev_flags |= IDE_DFLAG_ATTACH;
}
void ide_disk_flush(ide_drive_t *drive)
static void ide_disk_flush(ide_drive_t *drive)
{
if (ata_id_flush_enabled(drive->id) == 0 ||
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
......@@ -692,7 +699,13 @@ void ide_disk_flush(ide_drive_t *drive)
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
}
int ide_disk_set_doorlock(ide_drive_t *drive, int on)
static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
{
return 0;
}
static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
int on)
{
ide_task_t task;
int ret;
......@@ -711,3 +724,15 @@ int ide_disk_set_doorlock(ide_drive_t *drive, int on)
return ret;
}
const struct ide_disk_ops ide_ata_disk_ops = {
.check = ide_disk_check,
.get_capacity = ide_disk_get_capacity,
.setup = ide_disk_setup,
.flush = ide_disk_flush,
.init_media = ide_disk_init_media,
.set_doorlock = ide_disk_set_doorlock,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.ioctl = ide_disk_ioctl,
};
#ifndef __IDE_DISK_H
#define __IDE_DISK_H
struct ide_disk_obj {
ide_drive_t *drive;
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
unsigned int openers; /* protected by BKL for now */
};
sector_t ide_gd_capacity(ide_drive_t *);
#include "ide-gd.h"
#ifdef CONFIG_IDE_GD_ATA
/* ide-disk.c */
void ide_disk_init_capacity(ide_drive_t *);
void ide_disk_setup(ide_drive_t *);
void ide_disk_flush(ide_drive_t *);
int ide_disk_set_doorlock(ide_drive_t *, int);
ide_startstop_t ide_do_rw_disk(ide_drive_t *, struct request *, sector_t);
extern const struct ide_disk_ops ide_ata_disk_ops;
ide_decl_devset(address);
ide_decl_devset(multcount);
ide_decl_devset(nowerr);
......@@ -24,12 +13,17 @@ ide_decl_devset(wcache);
ide_decl_devset(acoustic);
/* ide-disk_ioctl.c */
int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
int ide_disk_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
unsigned long);
#ifdef CONFIG_IDE_PROC_FS
/* ide-disk_proc.c */
extern ide_proc_entry_t ide_disk_proc[];
extern const struct ide_proc_devset ide_disk_settings[];
#endif
#else
#define ide_disk_proc NULL
#define ide_disk_settings NULL
#endif
#endif /* __IDE_DISK_H */
......@@ -13,12 +13,10 @@ static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
{ 0 }
};
int ide_disk_ioctl(struct inode *inode, struct file *file,
int ide_disk_ioctl(ide_drive_t *drive, struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
int err;
err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
......
......@@ -68,7 +68,7 @@
* Used to finish servicing a request. For read/write requests, we will call
* ide_end_request to pass to the next buffer.
*/
int ide_floppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
static int ide_floppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
......@@ -280,13 +280,12 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
pc->req_xfer = pc->buf_size = rq->data_len;
}
ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, struct request *rq,
sector_t block_s)
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;
ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
"errors: %d\n",
......@@ -316,7 +315,7 @@ ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
}
pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(drive, pc, rq, block);
idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
......@@ -406,7 +405,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
* Determine if a media is present in the floppy drive, and if so, its LBA
* capacity.
*/
int ide_floppy_get_capacity(ide_drive_t *drive)
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
......@@ -505,9 +504,9 @@ int ide_floppy_get_capacity(ide_drive_t *drive)
return rc;
}
void ide_floppy_setup(ide_drive_t *drive)
static void ide_floppy_setup(ide_drive_t *drive)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
u16 *id = drive->id;
drive->pc_callback = ide_floppy_callback;
......@@ -547,3 +546,33 @@ void ide_floppy_setup(ide_drive_t *drive)
drive->dev_flags |= IDE_DFLAG_ATTACH;
}
static void ide_floppy_flush(ide_drive_t *drive)
{
}
static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
{
int ret = 0;
if (ide_do_test_unit_ready(drive, disk))
ide_do_start_stop(drive, disk, 1);
ret = ide_floppy_get_capacity(drive);
set_capacity(disk, ide_gd_capacity(drive));
return ret;
}
const struct ide_disk_ops ide_atapi_disk_ops = {
.check = ide_check_atapi_device,
.get_capacity = ide_floppy_get_capacity,
.setup = ide_floppy_setup,
.flush = ide_floppy_flush,
.init_media = ide_floppy_init_media,
.set_doorlock = ide_set_media_lock,
.do_request = ide_floppy_do_request,
.end_request = ide_floppy_end_request,
.ioctl = ide_floppy_ioctl,
};
#ifndef __IDE_FLOPPY_H
#define __IDE_FLOPPY_H
#define DRV_NAME "ide-floppy"
#define PFX DRV_NAME ": "
#include "ide-gd.h"
/* define to see debug info */
#define IDEFLOPPY_DEBUG_LOG 0
#if IDEFLOPPY_DEBUG_LOG
#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
/*
* Most of our global data which we need to save even as we leave the driver
* due to an interrupt or a timer event is stored in a variable of type
* idefloppy_floppy_t, defined below.
*/
typedef struct ide_floppy_obj {
ide_drive_t *drive;
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
unsigned int openers; /* protected by BKL for now */
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;
/* Last error information */
u8 sense_key, asc, ascq;
int progress_indication;
/* Device information */
/* Current format */
int blocks, block_size, bs_factor;
/* Last format capacity descriptor */
u8 cap_desc[8];
/* Copy of the flexible disk page */
u8 flexible_disk_page[32];
} idefloppy_floppy_t;
#ifdef CONFIG_IDE_GD_ATAPI
typedef struct ide_disk_obj idefloppy_floppy_t;
/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
......@@ -57,23 +19,23 @@ typedef struct ide_floppy_obj {
#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
sector_t ide_gd_capacity(ide_drive_t *);
/* ide-floppy.c */
extern const struct ide_disk_ops ide_atapi_disk_ops;
void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
int ide_floppy_get_capacity(ide_drive_t *);
void ide_floppy_setup(ide_drive_t *);
ide_startstop_t ide_floppy_do_request(ide_drive_t *, struct request *, sector_t);
int ide_floppy_end_request(ide_drive_t *, int, int);
/* ide-floppy_ioctl.c */
int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long);
int ide_floppy_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
unsigned long);
#ifdef CONFIG_IDE_PROC_FS
/* ide-floppy_proc.c */
extern ide_proc_entry_t ide_floppy_proc[];
extern const struct ide_proc_devset ide_floppy_settings[];
#endif
#else
#define ide_floppy_proc NULL
#define ide_floppy_settings NULL
#endif
#endif /*__IDE_FLOPPY_H */
......@@ -33,7 +33,7 @@
static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
......@@ -260,13 +260,10 @@ static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
}
}
int ide_floppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
int ide_floppy_ioctl(ide_drive_t *drive, struct inode *inode,
struct file *file, unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct ide_atapi_pc pc;
void __user *argp = (void __user *)arg;
int err;
......
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/mutex.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include "ide-floppy.h"
#define IDEFLOPPY_VERSION "1.00"
/* module parameters */
static unsigned long debug_mask;
module_param(debug_mask, ulong, 0644);
static DEFINE_MUTEX(ide_disk_ref_mutex);
static void ide_disk_release(struct kref *);
static struct ide_floppy_obj *ide_disk_get(struct gendisk *disk)
{
struct ide_floppy_obj *idkp = NULL;
mutex_lock(&ide_disk_ref_mutex);
idkp = ide_drv_g(disk, ide_floppy_obj);
if (idkp) {
if (ide_device_get(idkp->drive))
idkp = NULL;
else
kref_get(&idkp->kref);
}
mutex_unlock(&ide_disk_ref_mutex);
return idkp;
}
static void ide_disk_put(struct ide_floppy_obj *idkp)
{
ide_drive_t *drive = idkp->drive;
mutex_lock(&ide_disk_ref_mutex);
kref_put(&idkp->kref, ide_disk_release);
ide_device_put(drive);
mutex_unlock(&ide_disk_ref_mutex);
}
sector_t ide_gd_capacity(ide_drive_t *drive)
{
return drive->capacity64;
}
static int ide_gd_probe(ide_drive_t *);
static void ide_gd_remove(ide_drive_t *drive)
{
struct ide_floppy_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
del_gendisk(g);
ide_disk_put(idkp);
}
static void ide_disk_release(struct kref *kref)
{
struct ide_floppy_obj *idkp = to_ide_drv(kref, ide_floppy_obj);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
kfree(idkp);
}
#ifdef CONFIG_IDE_PROC_FS
static ide_proc_entry_t *ide_floppy_proc_entries(ide_drive_t *drive)
{
return ide_floppy_proc;
}
static const struct ide_proc_devset *ide_floppy_proc_devsets(ide_drive_t *drive)
{
return ide_floppy_settings;
}
#endif
static ide_driver_t ide_gd_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-floppy",
.bus = &ide_bus_type,
},
.probe = ide_gd_probe,
.remove = ide_gd_remove,
.version = IDEFLOPPY_VERSION,
.do_request = ide_floppy_do_request,
.end_request = ide_floppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc_entries = ide_floppy_proc_entries,
.proc_devsets = ide_floppy_proc_devsets,
#endif
};
static int ide_gd_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *idkp;
ide_drive_t *drive;
int ret = 0;
idkp = ide_disk_get(disk);
if (idkp == NULL)
return -ENXIO;
drive = idkp->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
idkp->openers++;
if (idkp->openers == 1) {
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
/* Just in case */
if (ide_do_test_unit_ready(drive, disk))
ide_do_start_stop(drive, disk, 1);
ret = ide_floppy_get_capacity(drive);
set_capacity(disk, ide_gd_capacity(drive));
if (ret && (filp->f_flags & O_NDELAY) == 0) {
/*
* Allow O_NDELAY to open a drive without a disk, or with an
* unreadable disk, so that we can get the format capacity
* of the drive or begin the format - Sam
*/
ret = -EIO;
goto out_put_idkp;
}
if ((drive->dev_flags & IDE_DFLAG_WP) && (filp->f_mode & 2)) {
ret = -EROFS;
goto out_put_idkp;
}
ide_set_media_lock(drive, disk, 1);
drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
check_disk_change(inode->i_bdev);
} else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
goto out_put_idkp;
}
return 0;
out_put_idkp:
idkp->openers--;
ide_disk_put(idkp);
return ret;
}
static int ide_gd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *idkp = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = idkp->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (idkp->openers == 1) {
ide_set_media_lock(drive, disk, 0);
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
}
idkp->openers--;
ide_disk_put(idkp);
return 0;
}
static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ide_floppy_obj *idkp = ide_drv_g(bdev->bd_disk, ide_floppy_obj);
ide_drive_t *drive = idkp->drive;
geo->heads = drive->bios_head;
geo->sectors = drive->bios_sect;
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
return 0;
}
static int ide_gd_media_changed(struct gendisk *disk)
{
struct ide_floppy_obj *idkp = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = idkp->drive;
int ret;
/* do not scan partitions twice if this is a removable device */
if (drive->dev_flags & IDE_DFLAG_ATTACH) {
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
ret = !!(drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED);
drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
return ret;
}
static int ide_gd_revalidate_disk(struct gendisk *disk)
{
struct ide_floppy_obj *idkp = ide_drv_g(disk, ide_floppy_obj);
set_capacity(disk, ide_gd_capacity(idkp->drive));
return 0;
}
static struct block_device_operations ide_gd_ops = {
.owner = THIS_MODULE,
.open = ide_gd_open,
.release = ide_gd_release,
.ioctl = ide_floppy_ioctl,
.getgeo = ide_gd_getgeo,
.media_changed = ide_gd_media_changed,
.revalidate_disk = ide_gd_revalidate_disk
};
static int ide_gd_probe(ide_drive_t *drive)
{
struct ide_floppy_obj *idkp;
struct gendisk *g;
if (!strstr("ide-floppy", drive->driver_req))
goto failed;
if (drive->media != ide_floppy)
goto failed;
if (!ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR PFX "%s: not supported by this version of "
DRV_NAME "\n", drive->name);
goto failed;
}
idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
if (!idkp) {
printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
drive->name);
goto failed;
}
g = alloc_disk_node(1 << PARTN_BITS, hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;
ide_init_disk(g, drive);
kref_init(&idkp->kref);
idkp->drive = drive;
idkp->driver = &ide_gd_driver;
idkp->disk = g;
g->private_data = &idkp->driver;
drive->driver_data = idkp;
drive->debug_mask = debug_mask;
ide_floppy_setup(drive);
set_capacity(g, ide_gd_capacity(drive));
g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
g->fops = &ide_gd_ops;
add_disk(g);
return 0;
out_free_idkp: