Commit 6341e62b authored by Christoph Jaeger's avatar Christoph Jaeger Committed by Michal Marek

kconfig: use bool instead of boolean for type definition attributes

Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.comSigned-off-by: 's avatarChristoph Jaeger <cj@linux.com>
Signed-off-by: 's avatarMichal Marek <mmarek@suse.cz>
parent 97bf6af1
......@@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA
endchoice
config MSP_HAS_USB
boolean
bool
depends on PMC_MSP
config MSP_ETH
boolean
bool
select MSP_HAS_MAC
depends on PMC_MSP
config MSP_HAS_MAC
boolean
bool
depends on PMC_MSP
......@@ -12,7 +12,7 @@ menuconfig CONNECTOR
if CONNECTOR
config PROC_EVENTS
boolean "Report process events to userspace"
bool "Report process events to userspace"
depends on CONNECTOR=y
default y
---help---
......
......@@ -1595,7 +1595,7 @@ config SENSORS_W83795
will be called w83795.
config SENSORS_W83795_FANCTRL
boolean "Include automatic fan control support (DANGEROUS)"
bool "Include automatic fan control support (DANGEROUS)"
depends on SENSORS_W83795
default n
help
......
......@@ -57,7 +57,7 @@ config SENSORS_LTC2978
be called ltc2978.
config SENSORS_LTC2978_REGULATOR
boolean "Regulator support for LTC2978 and compatibles"
bool "Regulator support for LTC2978 and compatibles"
depends on SENSORS_LTC2978 && REGULATOR
help
If you say yes here you get regulator support for Linear
......
......@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
if I2C
config I2C_BOARDINFO
boolean
bool
default y
config I2C_COMPAT
boolean "Enable compatibility bits for old user-space"
bool "Enable compatibility bits for old user-space"
default y
help
Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
......
......@@ -21,7 +21,7 @@ config IIO_BUFFER
if IIO_BUFFER
config IIO_BUFFER_CB
boolean "IIO callback buffer used for push in-kernel interfaces"
bool "IIO callback buffer used for push in-kernel interfaces"
help
Should be selected by any drivers that do in-kernel push
usage. That is, those where the data is pushed to the consumer.
......@@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER
endif # IIO_BUFFER
config IIO_TRIGGER
boolean "Enable triggered sampling support"
bool "Enable triggered sampling support"
help
Provides IIO core support for triggers. Currently these
are used to initialize capture of samples to push into
......
......@@ -24,7 +24,7 @@ config MISDN_HFCMULTI
* HFC-E1 (E1 interface for 2Mbit ISDN)
config MISDN_HFCMULTI_8xx
boolean "Support for XHFC embedded board in HFC multiport driver"
bool "Support for XHFC embedded board in HFC multiport driver"
depends on MISDN
depends on MISDN_HFCMULTI
depends on 8xx
......
......@@ -177,7 +177,7 @@ config MD_FAULTY
source "drivers/md/bcache/Kconfig"
config BLK_DEV_DM_BUILTIN
boolean
bool
config BLK_DEV_DM
tristate "Device mapper support"
......@@ -196,7 +196,7 @@ config BLK_DEV_DM
If unsure, say N.
config DM_DEBUG
boolean "Device mapper debugging support"
bool "Device mapper debugging support"
depends on BLK_DEV_DM
---help---
Enable this for messages that may help debug device-mapper problems.
......
......@@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
device-mapper targets such as the thin provisioning target.
config DM_DEBUG_BLOCK_STACK_TRACING
boolean "Keep stack trace of persistent data block lock holders"
bool "Keep stack trace of persistent data block lock holders"
depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
select STACKTRACE
---help---
......
......@@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
will be called davinci_cpdma. This is recommended.
config TI_CPSW_PHY_SEL
boolean "TI CPSW Switch Phy sel Support"
bool "TI CPSW Switch Phy sel Support"
depends on TI_CPSW
---help---
This driver supports configuring of the phy mode connected to
......@@ -71,7 +71,7 @@ config TI_CPSW
will be called cpsw.
config TI_CPTS
boolean "TI Common Platform Time Sync (CPTS) Support"
bool "TI Common Platform Time Sync (CPTS) Support"
depends on TI_CPSW
select PTP_1588_CLOCK
---help---
......
......@@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
not generally have permanently assigned Ethernet addresses.
config USB_ALI_M5632
boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
bool "ALi M5632 based 'USB 2.0 Data Link' cables"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
based on this design, which supports USB 2.0 high speed.
config USB_AN2720
boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
......@@ -412,7 +412,7 @@ config USB_AN2720
Cypress brand.
config USB_BELKIN
boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
......@@ -421,7 +421,7 @@ config USB_BELKIN
microcontroller, with LEDs that indicate traffic.
config USB_ARMLINUX
boolean "Embedded ARM Linux links (iPaq, ...)"
bool "Embedded ARM Linux links (iPaq, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
......@@ -438,14 +438,14 @@ config USB_ARMLINUX
this simpler protocol by installing a different kernel.
config USB_EPSON2888
boolean "Epson 2888 based firmware (DEVELOPMENT)"
bool "Epson 2888 based firmware (DEVELOPMENT)"
depends on USB_NET_CDC_SUBSET
help
Choose this option to support the usb networking links used
by some sample firmware from Epson.
config USB_KC2190
boolean "KT Technology KC2190 based cables (InstaNet)"
bool "KT Technology KC2190 based cables (InstaNet)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
......
......@@ -243,14 +243,14 @@ config RT2X00_LIB
select AVERAGE
config RT2X00_LIB_FIRMWARE
boolean
bool
select FW_LOADER
config RT2X00_LIB_CRYPTO
boolean
bool
config RT2X00_LIB_LEDS
boolean
bool
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
config RT2X00_LIB_DEBUGFS
......
......@@ -3,7 +3,7 @@
#
config PCIEAER
boolean "Root Port Advanced Error Reporting support"
bool "Root Port Advanced Error Reporting support"
depends on PCIEPORTBUS
select RAS
default y
......
......@@ -65,7 +65,7 @@ config RTC_DEBUG
comment "RTC interfaces"
config RTC_INTF_SYSFS
boolean "/sys/class/rtc/rtcN (sysfs)"
bool "/sys/class/rtc/rtcN (sysfs)"
depends on SYSFS
default RTC_CLASS
help
......@@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
If unsure, say Y.
config RTC_INTF_PROC
boolean "/proc/driver/rtc (procfs for rtcN)"
bool "/proc/driver/rtc (procfs for rtcN)"
depends on PROC_FS
default RTC_CLASS
help
......@@ -88,7 +88,7 @@ config RTC_INTF_PROC
If unsure, say Y.
config RTC_INTF_DEV
boolean "/dev/rtcN (character devices)"
bool "/dev/rtcN (character devices)"
default RTC_CLASS
help
Say yes here if you want to use your RTCs using the /dev
......@@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM
Supports the RTC firmware in the MSP430 on the DM355 EVM.
config RTC_DRV_TWL92330
boolean "TI TWL92330/Menelaus"
bool "TI TWL92330/Menelaus"
depends on MENELAUS
help
If you say yes here you get support for the RTC on the
......
......@@ -29,7 +29,7 @@ menuconfig SPI
if SPI
config SPI_DEBUG
boolean "Debug support for SPI drivers"
bool "Debug support for SPI drivers"
depends on DEBUG_KERNEL
help
Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
......@@ -40,8 +40,8 @@ config SPI_DEBUG
#
config SPI_MASTER
# boolean "SPI Master Support"
boolean
# bool "SPI Master Support"
bool
default SPI
help
If your system has an master-capable SPI controller (which
......
config STAGING_BOARD
boolean "Staging Board Support"
bool "Staging Board Support"
depends on OF_ADDRESS
depends on BROKEN
help
......
config USB_EMXX
boolean "EMXX USB Function Device Controller"
bool "EMXX USB Function Device Controller"
depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
help
The Emma Mobile series of SoCs from Renesas Electronics and
......
......@@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
if IIO_SIMPLE_DUMMY
config IIO_SIMPLE_DUMMY_EVENTS
boolean "Event generation support"
bool "Event generation support"
select IIO_DUMMY_EVGEN
help
Add some dummy events to the simple dummy driver.
config IIO_SIMPLE_DUMMY_BUFFER
boolean "Buffered capture support"
bool "Buffered capture support"
select IIO_BUFFER
select IIO_KFIFO_BUF
help
......
......@@ -498,7 +498,7 @@ config SERIAL_MFD_HSU
select SERIAL_CORE
config SERIAL_MFD_HSU_CONSOLE
boolean "Medfile HSU serial console support"
bool "Medfile HSU serial console support"
depends on SERIAL_MFD_HSU=y
select SERIAL_CORE_CONSOLE
......
......@@ -45,7 +45,7 @@ menuconfig USB_GADGET
if USB_GADGET
config USB_GADGET_DEBUG
boolean "Debugging messages (DEVELOPMENT)"
bool "Debugging messages (DEVELOPMENT)"
depends on DEBUG_KERNEL
help
Many controller and gadget drivers will print some debugging
......@@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
production build.
config USB_GADGET_DEBUG_FILES
boolean "Debugging information files (DEVELOPMENT)"
bool "Debugging information files (DEVELOPMENT)"
depends on PROC_FS
help
Some of the drivers in the "gadget" framework can expose
......@@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
here. If in doubt, or to conserve kernel memory, say "N".
config USB_GADGET_DEBUG_FS
boolean "Debugging information files in debugfs (DEVELOPMENT)"
bool "Debugging information files in debugfs (DEVELOPMENT)"
depends on DEBUG_FS
help
Some of the drivers in the "gadget" framework can expose
......@@ -230,7 +230,7 @@ config USB_CONFIGFS
For more information see Documentation/usb/gadget_configfs.txt.
config USB_CONFIGFS_SERIAL
boolean "Generic serial bulk in/out"
bool "Generic serial bulk in/out"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
......@@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
The function talks to the Linux-USB generic serial driver.
config USB_CONFIGFS_ACM
boolean "Abstract Control Model (CDC ACM)"
bool "Abstract Control Model (CDC ACM)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
......@@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
config USB_CONFIGFS_OBEX
boolean "Object Exchange Model (CDC OBEX)"
bool "Object Exchange Model (CDC OBEX)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
......@@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
since the kernel itself doesn't implement the OBEX protocol.
config USB_CONFIGFS_NCM
boolean "Network Control Model (CDC NCM)"
bool "Network Control Model (CDC NCM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
......@@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
different alignment possibilities.
config USB_CONFIGFS_ECM
boolean "Ethernet Control Model (CDC ECM)"
bool "Ethernet Control Model (CDC ECM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
......@@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
supported by firmware for smart network devices.
config USB_CONFIGFS_ECM_SUBSET
boolean "Ethernet Control Model (CDC ECM) subset"
bool "Ethernet Control Model (CDC ECM) subset"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
......@@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
the host is the same (a usbX device), so the differences are minimal.
config USB_CONFIGFS_PHONET
boolean "Phonet protocol"
bool "Phonet protocol"
depends on USB_CONFIGFS
depends on NET
depends on PHONET
......@@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
The Phonet protocol implementation for USB device.
config USB_CONFIGFS_MASS_STORAGE
boolean "Mass storage"
bool "Mass storage"
depends on USB_CONFIGFS
depends on BLOCK
select USB_F_MASS_STORAGE
......@@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
specified as a module parameter or sysfs option.
config USB_CONFIGFS_F_LB_SS
boolean "Loopback and sourcesink function (for testing)"
bool "Loopback and sourcesink function (for testing)"
depends on USB_CONFIGFS
select USB_F_SS_LB
help
......@@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
and its driver through a basic set of functional tests.
config USB_CONFIGFS_F_FS
boolean "Function filesystem (FunctionFS)"
bool "Function filesystem (FunctionFS)"
depends on USB_CONFIGFS
select USB_F_FS
help
......@@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
mass storage) and other are implemented in user space.
config USB_CONFIGFS_F_UAC1
boolean "Audio Class 1.0"
bool "Audio Class 1.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
......@@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
on the device.
config USB_CONFIGFS_F_UAC2
boolean "Audio Class 2.0"
bool "Audio Class 2.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
......@@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
wants as audio data to the USB Host.
config USB_CONFIGFS_F_MIDI
boolean "MIDI function"
bool "MIDI function"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
......@@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
ALSA's aconnect utility etc.
config USB_CONFIGFS_F_HID
boolean "HID function"
bool "HID function"
depends on USB_CONFIGFS
select USB_F_HID
help
......
......@@ -40,7 +40,7 @@ config USB_ZERO
dynamically linked module called "g_zero".
config USB_ZERO_HNPTEST
boolean "HNP Test Device"
bool "HNP Test Device"
depends on USB_ZERO && USB_OTG
help
You can configure this device to enumerate using the device
......
......@@ -198,7 +198,7 @@ config USB_S3C2410
S3C2440 processors.
config USB_S3C2410_DEBUG
boolean "S3C2410 udc debug messages"
bool "S3C2410 udc debug messages"
depends on USB_S3C2410
config USB_S3C_HSUDC
......@@ -287,7 +287,7 @@ config USB_NET2272
gadget drivers to also be dynamically linked.
config USB_NET2272_DMA
boolean "Support external DMA controller"
bool "Support external DMA controller"
depends on USB_NET2272 && HAS_DMA
help
The NET2272 part can optionally support an external DMA
......
......@@ -119,7 +119,7 @@ config TAHVO_USB
config TAHVO_USB_HOST_BY_DEFAULT
depends on TAHVO_USB
boolean "Device in USB host mode by default"
bool "Device in USB host mode by default"
help
Say Y here, if you want the device to enter USB host mode
by default on bootup.
......
......@@ -914,7 +914,7 @@ config NUMA_BALANCING_DEFAULT_ENABLED
machine.
menuconfig CGROUPS
boolean "Control Group support"
bool "Control Group support"
select KERNFS
help
This option adds support for grouping sets of processes together, for
......@@ -1770,7 +1770,7 @@ config SLABINFO
default y
config RT_MUTEXES
boolean
bool
config BASE_SMALL
int
......
......@@ -14,7 +14,7 @@ config BITREVERSE
tristate
config RATIONAL
boolean
bool
config GENERIC_STRNCPY_FROM_USER
bool
......@@ -39,14 +39,14 @@ config GENERIC_IOMAP
select GENERIC_PCI_IOMAP
config GENERIC_IO
boolean
bool
default n
config STMP_DEVICE
bool
config PERCPU_RWSEM
boolean
bool
config ARCH_USE_CMPXCHG_LOCKREF
bool
......@@ -257,7 +257,7 @@ config DECOMPRESS_LZ4
# Generic allocator support is selected if needed
#
config GENERIC_ALLOCATOR
boolean
bool
#
# reed solomon support is select'ed if needed
......@@ -266,16 +266,16 @@ config REED_SOLOMON
tristate
config REED_SOLOMON_ENC8
boolean
bool
config REED_SOLOMON_DEC8
boolean
bool
config REED_SOLOMON_ENC16
boolean
bool
config REED_SOLOMON_DEC16
boolean
bool
#
# BCH support is selected if needed
......@@ -284,7 +284,7 @@ config BCH
tristate
config BCH_CONST_PARAMS
boolean
bool
help
Drivers may select this option to force specific constant
values for parameters 'm' (Galois field order) and 't'
......@@ -320,7 +320,7 @@ config BCH_CONST_T
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
boolean
bool
config TEXTSEARCH_KMP
tristate
......@@ -332,10 +332,10 @@ config TEXTSEARCH_FSM
tristate
config BTREE
boolean
bool
config INTERVAL_TREE
boolean
bool
help
Simple, embeddable, interval-tree. Can find the start of an
overlapping range in log(n) time and then iterate over all
......@@ -363,18 +363,18 @@ config ASSOCIATIVE_ARRAY
for more information.
config HAS_IOMEM
boolean
bool
depends on !NO_IOMEM
select GENERIC_IO
default y
config HAS_IOPORT_MAP
boolean
bool
depends on HAS_IOMEM && !NO_IOPORT_MAP
default y
config HAS_DMA
boolean
bool
depends on !NO_DMA
default y
......
......@@ -129,28 +129,28 @@ config SPARSEMEM_VMEMMAP
efficient option when sufficient kernel resources are available.
config HAVE_MEMBLOCK
boolean
bool
config HAVE_MEMBLOCK_NODE_MAP
boolean
bool
config HAVE_MEMBLOCK_PHYS_MAP
boolean
bool
config HAVE_GENERIC_RCU_GUP
boolean
bool
config ARCH_DISCARD_MEMBLOCK
boolean
bool
config NO_BOOTMEM
boolean
bool
config MEMORY_ISOLATION
boolean
bool
config MOVABLE_NODE
boolean "Enable to assign a node which has only movable memory"
bool "Enable to assign a node which has only movable memory"
depends on HAVE_MEMBLOCK
depends on NO_BOOTMEM
depends on X86_64
......@@ -228,12 +228,12 @@ config SPLIT_PTLOCK_CPUS
default "4"
config ARCH_ENABLE_SPLIT_PMD_PTLOCK
boolean
bool
#
# support for memory balloon
config MEMORY_BALLOON
boolean
bool
#
# support for memory balloon compaction
......@@ -276,7 +276,7 @@ config MIGRATION
allocation instead of reclaiming.
config ARCH_ENABLE_HUGEPAGE_MIGRATION
boolean
bool
config PHYS_ADDR_T_64BIT
def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
......
......@@ -231,18 +231,18 @@ source "net/hsr/Kconfig"
source "net/switchdev/Kconfig"
config RPS
boolean
bool
depends on SMP && SYSFS
default y
config RFS_ACCEL
boolean
bool
depends on RPS
select CPU_RMAP
default y
config XPS
boolean
bool
depends on SMP
default y
......@@ -254,18 +254,18 @@ config CGROUP_NET_PRIO
a per-interface basis.
config CGROUP_NET_CLASSID
boolean "Network classid cgroup"
bool "Network classid cgroup"
depends on CGROUPS
---help---
Cgroup subsystem for use as general purpose socket classid marker that is
being used in cls_cgroup and for netfilter matching.
config NET_RX_BUSY_POLL
boolean
bool
default y
config BQL
boolean
bool
depends on SYSFS
select DQL
default y
......@@ -282,7 +282,7 @@ config BPF_JIT
this feature changing /proc/sys/net/core/bpf_jit_enable
config NET_FLOW_LIMIT
boolean
bool
depends on RPS
default y
---help---
......
......@@ -348,7 +348,7 @@ config NET_SCH_PLUG
comment "Classification"
config NET_CLS
boolean
bool
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
......
......@@ -3,7 +3,7 @@
#
config NET_SWITCHDEV
boolean "Switch (and switch-ish) device support (EXPERIMENTAL)"
bool "Switch (and switch-ish) device support (EXPERIMENTAL)"
depends on INET
---help---
This module provides glue between core networking code and device
......
......@@ -16,7 +16,7 @@ config INTEGRITY
if INTEGRITY
config INTEGRITY_SIGNATURE
boolean "Digital signature verification using multiple keyrings"
bool "Digital signature verification using multiple keyrings"
depends on KEYS
default n
select SIGNATURE
......@@ -30,7 +30,7 @@ config INTEGRITY_SIGNATURE
usually only added from initramfs.
config INTEGRITY_ASYMMETRIC_KEYS
boolean "Enable asymmetric keys support"
bool "Enable asymmetric keys support"
depends on INTEGRITY_SIGNATURE
default n
select ASYMMETRIC_KEY_TYPE
......
config EVM
boolean "EVM support"
bool "EVM support"
select KEYS
select ENCRYPTED_KEYS
select CRYPTO_HMAC
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment