Commit 531c4f89 authored by Jeff Kirsher's avatar Jeff Kirsher

acenic: Move the Alteon driver

Based on feedback from Alan Cox, the acenic driver moved to
drivers/net/ethernet/alteon/ and made the necessary Kconfig and
Makefile changes.

CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent cdd80bd4
......@@ -213,7 +213,7 @@ ACENIC DRIVER
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/ethernet/3com/acenic*
F: drivers/net/ethernet/alteon/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@piie.net>
......
......@@ -117,31 +117,4 @@ config TYPHOON
To compile this driver as a module, choose M here. The module
will be called typhoon.
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
---help---
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
bytes/frame) however it requires that your switches can handle this
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
---help---
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
version)). This will reduce the size of the driver object by
app. 100KB. If you are not sure whether your card is a Tigon I or a
Tigon II, say N here.
The safe and default value for this is N.
endif # NET_VENDOR_3COM
......@@ -8,5 +8,4 @@ obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_TYPHOON) += typhoon.o
......@@ -14,6 +14,7 @@ if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_ADAPTEC) += adaptec/
obj-$(CONFIG_GRETH) += aeroflex/
obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
......
#
# Alteon network device configuration
#
config NET_VENDOR_ALTEON
bool "Alteon devices"
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Alteon cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_ALTEON
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
---help---
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
bytes/frame) however it requires that your switches can handle this
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
---help---
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
version)). This will reduce the size of the driver object by
app. 100KB. If you are not sure whether your card is a Tigon I or a
Tigon II, say N here.
The safe and default value for this is N.
endif # NET_VENDOR_ALTEON
#
# Makefile for the Alteon network device drivers.
#
obj-$(CONFIG_ACENIC) += acenic.o
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment