Commit 512d1027 authored by Andreas Herrmann's avatar Andreas Herrmann Committed by Jean Delvare

hwmon: Add driver for AMD family 15h processor power information

This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)
Signed-off-by: default avatarAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 9e581311
Kernel driver fam15h_power
==========================
Supported chips:
* AMD Family 15h Processors
Prefix: 'fam15h_power'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
(not yet published)
Author: Andreas Herrmann <andreas.herrmann3@amd.com>
Description
-----------
This driver permits reading of registers providing power information
of AMD Family 15h processors.
For AMD Family 15h processors the following power values can be
calculated using different processor northbridge function registers:
* BasePwrWatts: Specifies in watts the maximum amount of power
consumed by the processor for NB and logic external to the core.
* ProcessorPwrWatts: Specifies in watts the maximum amount of power
the processor can support.
* CurrPwrWatts: Specifies in watts the current amount of power being
consumed by the processor.
This driver provides ProcessorPwrWatts and CurrPwrWatts:
* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)
On multi-node processors the calculated value is for the entire
package and not for a single node. Thus the driver creates sysfs
attributes only for internal node0 of a multi-node processor.
......@@ -483,6 +483,13 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
M: Andreas Herrmann <andreas.herrmann3@amd.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/fam15h_power
F: drivers/hwmon/fam15h_power.c
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
......
......@@ -248,6 +248,16 @@ config SENSORS_K10TEMP
This driver can also be built as a module. If so, the module
will be called k10temp.
config SENSORS_FAM15H_POWER
tristate "AMD Family 15h processor power"
depends on X86 && PCI
help
If you say yes here you get support for processor power
information of your AMD family 15h CPU.
This driver can also be built as a module. If so, the module
will be called fam15h_power.
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C && EXPERIMENTAL
......
......@@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o
obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
obj-$(CONFIG_SENSORS_G760A) += g760a.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
......
/*
* fam15h_power.c - AMD Family 15h processor power monitoring
*
* Copyright (c) 2011 Advanced Micro Devices, Inc.
* Author: Andreas Herrmann <andreas.herrmann3@amd.com>
*
*
* This driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License; either
* version 2 of the License, or (at your option) any later version.
*
* This driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this driver; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/bitops.h>
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
MODULE_LICENSE("GPL");
/* D18F3 */
#define REG_NORTHBRIDGE_CAP 0xe8
/* D18F4 */
#define REG_PROCESSOR_TDP 0x1b8
/* D18F5 */
#define REG_TDP_RUNNING_AVERAGE 0xe0
#define REG_TDP_LIMIT3 0xe8
struct fam15h_power_data {
struct device *hwmon_dev;
unsigned int tdp_to_watts;
unsigned int base_tdp;
unsigned int processor_pwr_watts;
};
static ssize_t show_power(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 val, tdp_limit, running_avg_range;
s32 running_avg_capture;
u64 curr_pwr_watts;
struct pci_dev *f4 = to_pci_dev(dev);
struct fam15h_power_data *data = dev_get_drvdata(dev);
pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
REG_TDP_RUNNING_AVERAGE, &val);
running_avg_capture = (val >> 4) & 0x3fffff;
running_avg_capture = sign_extend32(running_avg_capture, 22);
running_avg_range = val & 0xf;
pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
REG_TDP_LIMIT3, &val);
tdp_limit = val >> 16;
curr_pwr_watts = tdp_limit + data->base_tdp -
(s32)(running_avg_capture >> (running_avg_range + 1));
curr_pwr_watts *= data->tdp_to_watts;
/*
* Convert to microWatt
*
* power is in Watt provided as fixed point integer with
* scaling factor 1/(2^16). For conversion we use
* (10^6)/(2^16) = 15625/(2^10)
*/
curr_pwr_watts = (curr_pwr_watts * 15625) >> 10;
return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
}
static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);
static ssize_t show_power_crit(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fam15h_power_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->processor_pwr_watts);
}
static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
static ssize_t show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "fam15h_power\n");
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct attribute *fam15h_power_attrs[] = {
&dev_attr_power1_input.attr,
&dev_attr_power1_crit.attr,
&dev_attr_name.attr,
NULL
};
static const struct attribute_group fam15h_power_attr_group = {
.attrs = fam15h_power_attrs,
};
static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4)
{
u32 val;
pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3),
REG_NORTHBRIDGE_CAP, &val);
if ((val & BIT(29)) && ((val >> 30) & 3))
return false;
return true;
}
static void __devinit fam15h_power_init_data(struct pci_dev *f4,
struct fam15h_power_data *data)
{
u32 val;
u64 tmp;
pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
data->base_tdp = val >> 16;
tmp = val & 0xffff;
pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
REG_TDP_LIMIT3, &val);
data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);
tmp *= data->tdp_to_watts;
/* result not allowed to be >= 256W */
if ((tmp >> 16) >= 256)
dev_warn(&f4->dev, "Bogus value for ProcessorPwrWatts "
"(processor_pwr_watts>=%u)\n",
(unsigned int) (tmp >> 16));
/* convert to microWatt */
data->processor_pwr_watts = (tmp * 15625) >> 10;
}
static int __devinit fam15h_power_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct fam15h_power_data *data;
struct device *dev;
int err;
if (!fam15h_power_is_internal_node0(pdev)) {
err = -ENODEV;
goto exit;
}
data = kzalloc(sizeof(struct fam15h_power_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
fam15h_power_init_data(pdev, data);
dev = &pdev->dev;
dev_set_drvdata(dev, data);
err = sysfs_create_group(&dev->kobj, &fam15h_power_attr_group);
if (err)
goto exit_free_data;
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_group;
}
return 0;
exit_remove_group:
sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group);
exit_free_data:
kfree(data);
exit:
return err;
}
static void __devexit fam15h_power_remove(struct pci_dev *pdev)
{
struct device *dev;
struct fam15h_power_data *data;
dev = &pdev->dev;
data = dev_get_drvdata(dev);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&dev->kobj, &fam15h_power_attr_group);
dev_set_drvdata(dev, NULL);
kfree(data);
}
static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{}
};
MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
static struct pci_driver fam15h_power_driver = {
.name = "fam15h_power",
.id_table = fam15h_power_id_table,
.probe = fam15h_power_probe,
.remove = __devexit_p(fam15h_power_remove),
};
static int __init fam15h_power_init(void)
{
return pci_register_driver(&fam15h_power_driver);
}
static void __exit fam15h_power_exit(void)
{
pci_unregister_driver(&fam15h_power_driver);
}
module_init(fam15h_power_init)
module_exit(fam15h_power_exit)
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment