Commit 4ede028f authored by Hans-Christian Egtvedt's avatar Hans-Christian Egtvedt Committed by Takashi Iwai

ALSA: Add ALSA driver for Atmel AC97 controller

This patch adds ALSA support for the AC97 controller found on Atmel
AVR32 devices.

Tested on ATSTK1006 + ATSTK1000 with a development board with a AC97
codec.
Signed-off-by: default avatarHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent e4967d60
/*
* Driver for the Atmel AC97C controller
*
* Copyright (C) 2005-2009 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef __INCLUDE_SOUND_ATMEL_AC97C_H
#define __INCLUDE_SOUND_ATMEL_AC97C_H
#include <linux/dw_dmac.h>
#define AC97C_CAPTURE 0x01
#define AC97C_PLAYBACK 0x02
#define AC97C_BOTH (AC97C_CAPTURE | AC97C_PLAYBACK)
/**
* struct atmel_ac97c_pdata - board specific AC97C configuration
* @rx_dws: DMA slave interface to use for sound capture.
* @tx_dws: DMA slave interface to use for sound playback.
* @reset_pin: GPIO pin wired to the reset input on the external AC97 codec,
* optional to use, set to -ENODEV if not in use. AC97 layer will
* try to do a software reset of the external codec anyway.
* @flags: Flags for which directions should be enabled.
*
* If the user do not want to use a DMA channel for playback or capture, i.e.
* only one feature is required on the board. The slave for playback or capture
* can be set to NULL. The AC97C driver will take use of this when setting up
* the sound streams.
*/
struct ac97c_platform_data {
struct dw_dma_slave rx_dws;
struct dw_dma_slave tx_dws;
unsigned int flags;
int reset_pin;
};
#endif /* __INCLUDE_SOUND_ATMEL_AC97C_H */
......@@ -8,4 +8,12 @@ config SND_ATMEL_ABDAC
help
ALSA sound driver for the Atmel Audio Bitstream DAC (ABDAC).
config SND_ATMEL_AC97C
tristate "Atmel AC97 Controller (AC97C) driver"
select SND_PCM
select SND_AC97_CODEC
depends on DW_DMAC && AVR32
help
ALSA sound driver for the Atmel AC97 controller.
endmenu
snd-atmel-abdac-objs := abdac.o
snd-atmel-ac97c-objs := ac97c.o
obj-$(CONFIG_SND_ATMEL_ABDAC) += snd-atmel-abdac.o
obj-$(CONFIG_SND_ATMEL_AC97C) += snd-atmel-ac97c.o
This diff is collapsed.
/*
* Register definitions for the Atmel AC97C controller
*
* Copyright (C) 2005-2009 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef __SOUND_ATMEL_AC97C_H
#define __SOUND_ATMEL_AC97C_H
#define AC97C_MR 0x08
#define AC97C_ICA 0x10
#define AC97C_OCA 0x14
#define AC97C_CARHR 0x20
#define AC97C_CATHR 0x24
#define AC97C_CASR 0x28
#define AC97C_CAMR 0x2c
#define AC97C_CBRHR 0x30
#define AC97C_CBTHR 0x34
#define AC97C_CBSR 0x38
#define AC97C_CBMR 0x3c
#define AC97C_CORHR 0x40
#define AC97C_COTHR 0x44
#define AC97C_COSR 0x48
#define AC97C_COMR 0x4c
#define AC97C_SR 0x50
#define AC97C_IER 0x54
#define AC97C_IDR 0x58
#define AC97C_IMR 0x5c
#define AC97C_VERSION 0xfc
#define AC97C_CATPR PDC_TPR
#define AC97C_CATCR PDC_TCR
#define AC97C_CATNPR PDC_TNPR
#define AC97C_CATNCR PDC_TNCR
#define AC97C_CARPR PDC_RPR
#define AC97C_CARCR PDC_RCR
#define AC97C_CARNPR PDC_RNPR
#define AC97C_CARNCR PDC_RNCR
#define AC97C_PTCR PDC_PTCR
#define AC97C_MR_ENA (1 << 0)
#define AC97C_MR_WRST (1 << 1)
#define AC97C_MR_VRA (1 << 2)
#define AC97C_CSR_TXRDY (1 << 0)
#define AC97C_CSR_UNRUN (1 << 2)
#define AC97C_CSR_RXRDY (1 << 4)
#define AC97C_CSR_ENDTX (1 << 10)
#define AC97C_CSR_ENDRX (1 << 14)
#define AC97C_CMR_SIZE_20 (0 << 16)
#define AC97C_CMR_SIZE_18 (1 << 16)
#define AC97C_CMR_SIZE_16 (2 << 16)
#define AC97C_CMR_SIZE_10 (3 << 16)
#define AC97C_CMR_CEM_LITTLE (1 << 18)
#define AC97C_CMR_CEM_BIG (0 << 18)
#define AC97C_CMR_CENA (1 << 21)
#define AC97C_CMR_DMAEN (1 << 22)
#define AC97C_SR_CAEVT (1 << 3)
#define AC97C_CH_ASSIGN(slot, channel) \
(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
#define AC97C_CHANNEL_NONE 0x0
#define AC97C_CHANNEL_A 0x1
#define AC97C_CHANNEL_B 0x2
#endif /* __SOUND_ATMEL_AC97C_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment