Commit 3e66848a authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge 4.5-rc6 into staging-next

We want the staging fixes in here as well.
Signed-off-by: 's avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parents 2cda64cf fc77dbd3
......@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "ext_i2s" - external I2S clock - optional,
- "ext_gmac" - external GMAC clock - optional
- "rmii_clkin" - external EMAC clock - optional
Example: Clock controller node:
......
......@@ -24,9 +24,8 @@ Main node required properties:
1 = edge triggered
4 = level triggered
Cells 4 and beyond are reserved for future use. When the 1st cell
has a value of 0 or 1, cells 4 and beyond act as padding, and may be
ignored. It is recommended that padding cells have a value of 0.
Cells 4 and beyond are reserved for future use and must have a value
of 0 if present.
- reg : Specifies base physical address(s) and size of the GIC
registers, in the following order:
......
......@@ -82,8 +82,8 @@ Example:
"ch16", "ch17", "ch18", "ch19",
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
clocks = <&cpg CPG_MOD 812>;
power-domains = <&cpg>;
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
......
......@@ -26,11 +26,7 @@ Example:
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: dcdc1 {
reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
......@@ -38,7 +34,6 @@ Example:
};
dcdc2_reg: dcdc2 {
reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -46,7 +41,6 @@ Example:
};
dcdc3_reg: dcc3 {
reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
......@@ -54,7 +48,6 @@ Example:
};
ldo1_reg: ldo1 {
reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -62,7 +55,6 @@ Example:
};
ldo2_reg: ldo2 {
reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -70,7 +62,6 @@ Example:
};
ldo3_reg: ldo3 {
reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -78,7 +69,6 @@ Example:
};
ldo4_reg: ldo4 {
reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......
......@@ -14,6 +14,10 @@ Required properties:
interrupt number is the rtc alarm interrupt and second interrupt number
is the rtc tick interrupt. The number of cells representing a interrupt
depends on the parent interrupt controller.
- clocks: Must contain a list of phandle and clock specifier for the rtc
and source clocks.
- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
same order as the clocks property.
Example:
......@@ -21,4 +25,6 @@ Example:
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <44 0 45 0>;
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
......@@ -9,7 +9,7 @@ Optional properties:
- fsl,uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
is DCE mode by default.
in DCE mode by default.
Note: Each uart controller should have an alias correctly numbered
in "aliases" node.
......
......@@ -14,3 +14,10 @@ filesystem.
efivarfs is typically mounted like this,
mount -t efivarfs none /sys/firmware/efi/efivars
Due to the presence of numerous firmware bugs where removing non-standard
UEFI variables causes the system firmware to fail to POST, efivarfs
files that are not well-known standardized variables are created
as immutable files. This doesn't prevent removal - "chattr -i" will work -
but it does prevent this kind of failure from being accomplished
accidentally.
High Precision Event Timer Driver for Linux
The High Precision Event Timer (HPET) hardware follows a specification
by Intel and Microsoft which can be found at
http://www.intel.com/hardwaredesign/hpetspec_1.pdf
by Intel and Microsoft, revision 1.
Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
and up to 32 comparators. Normally three or more comparators are provided,
......
......@@ -926,17 +926,24 @@ M: Emilio López <emilio@elopez.com.ar>
S: Maintained
F: drivers/clk/sunxi/
ARM/Amlogic MesonX SoC support
ARM/Amlogic Meson SoC support
M: Carlo Caione <carlo@caione.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-meson@googlegroups.com
W: http://linux-meson.com/
S: Maintained
F: drivers/media/rc/meson-ir.c
N: meson[x68]
F: arch/arm/mach-meson/
F: arch/arm/boot/dts/meson*
N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
S: Maintained
F: arch/arm/mach-alpine/
F: arch/arm/boot/dts/alpine*
F: arch/arm64/boot/dts/al/
F: drivers/*/*alpine*
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
......@@ -1448,8 +1455,8 @@ S: Maintained
ARM/RENESAS ARM64 ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-sh@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-sh/list/
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
......@@ -3456,7 +3463,6 @@ F: drivers/usb/dwc2/
DESIGNWARE USB3 DRD IP DRIVER
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/dwc3/
......@@ -6134,7 +6140,7 @@ F: include/uapi/linux/sunrpc/
KERNEL SELFTEST FRAMEWORK
M: Shuah Khan <shuahkh@osg.samsung.com>
L: linux-api@vger.kernel.org
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/shuah/linux-kselftest
S: Maintained
F: tools/testing/selftests
......@@ -7360,7 +7366,7 @@ F: drivers/tty/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <balbi@kernel.org>
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
......@@ -7692,13 +7698,13 @@ S: Maintained
F: arch/nios2/
NOKIA N900 POWER SUPPLY DRIVERS
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
R: Pali Rohár <pali.rohar@gmail.com>
F: include/linux/power/bq2415x_charger.h
F: include/linux/power/bq27xxx_battery.h
F: include/linux/power/isp1704_charger.h
F: drivers/power/bq2415x_charger.c
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
F: drivers/power/isp1704_charger.c
F: drivers/power/rx51_battery.c
......@@ -7929,11 +7935,9 @@ F: drivers/media/platform/omap3isp/
F: drivers/staging/media/omap4iss/
OMAP USB SUPPORT
M: Felipe Balbi <balbi@kernel.org>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
S: Orphan
F: drivers/usb/*/*omap*
F: arch/arm/*omap*/usb*
......@@ -9571,6 +9575,12 @@ M: Andreas Noever <andreas.noever@gmail.com>
S: Maintained
F: drivers/thunderbolt/
TI BQ27XXX POWER SUPPLY DRIVER
R: Andrew F. Davis <afd@ti.com>
F: include/linux/power/bq27xxx_battery.h
F: drivers/power/bq27xxx_battery.c
F: drivers/power/bq27xxx_battery_i2c.c
TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
......@@ -12013,7 +12023,6 @@ F: arch/arm64/xen/
F: arch/arm64/include/asm/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
M: Wei Liu <wei.liu2@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org
......
VERSION = 4
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc6
NAME = Blurry Fish Butt
# *DOCUMENTATION*
......
......@@ -12,8 +12,6 @@ config ARC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
......@@ -275,14 +273,6 @@ config ARC_DCCM_BASE
default "0xA0000000"
depends on ARC_HAS_DCCM
config ARC_HAS_HW_MPY
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
default y
help
Influences how gcc generates code for MPY operations.
If enabled, MPYxx insns are generated, provided by Standard/XMAC
Multipler. Otherwise software multipy lib is used
choice
prompt "MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
......@@ -542,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
if SMP
config ARC_IPI_DBG
bool "Debug Inter Core interrupts"
default n
endif
endif
config ARC_UBOOT_SUPPORT
......
......@@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
ifndef CONFIG_ARC_HAS_HW_MPY
cflags-y += -mno-mpy
endif
LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel
......
......@@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
......@@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
......@@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
......
......@@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......@@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
......@@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
......
......@@ -40,14 +40,10 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AXS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......@@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
......@@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
......
......@@ -4,6 +4,7 @@ CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
......@@ -26,7 +27,6 @@ CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -34,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
......@@ -51,7 +52,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
......@@ -63,4 +63,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y
......@@ -35,6 +35,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
......@@ -49,7 +50,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
......@@ -61,4 +61,3 @@ CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_XZ_DEC=y
......@@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
......@@ -21,13 +22,11 @@ CONFIG_MODULES=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_SIM=y
CONFIG_ARC_BOARD_ML509=y
CONFIG_ISA_ARCV2=y
CONFIG_SMP=y
CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
CONFIG_PREEMPT=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
......@@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
......@@ -60,4 +59,3 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_XZ_DEC=y
......@@ -33,6 +33,7 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set