Commit 227f0647 authored by Ryan Desfosses's avatar Ryan Desfosses Committed by Bjorn Helgaas

PCI: Merge multi-line quoted strings

Merge quoted strings that are broken across lines into a single entity.
The compiler merges them anyway, but checkpatch complains about it, and
merging them makes it easier to grep for strings.

No functional change.

[bhelgaas: changelog, do the same for everything under drivers/pci]
Signed-off-by: 's avatarRyan Desfosses <ryan@desfo.org>
Signed-off-by: 's avatarBjorn Helgaas <bhelgaas@google.com>
parent 3c78bc61
......@@ -231,10 +231,7 @@ static int pci_vpd_pci22_wait(struct pci_dev *dev)
}
if (time_after(jiffies, timeout)) {
dev_printk(KERN_DEBUG, &dev->dev,
"vpd r/w failed. This is likely a firmware "
"bug on this device. Contact the card "
"vendor for a firmware update.");
dev_printk(KERN_DEBUG, &dev->dev, "vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
return -ETIMEDOUT;
}
if (fatal_signal_pending(current))
......
......@@ -277,9 +277,8 @@ static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
else if (size == 2)
*val = (*val >> (8 * (where & 2))) & 0xffff;
dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x "
"where=0x%04x size=%d val=0x%08lx\n", bus->number,
devfn, where, size, (unsigned long)*val);
dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
bus->number, devfn, where, size, (unsigned long)*val);
return ret;
}
......@@ -302,9 +301,8 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x "
"where=0x%04x size=%d val=0x%08lx\n", bus->number,
devfn, where, size, (unsigned long)val);
dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n",
bus->number, devfn, where, size, (unsigned long)val);
if (size == 1) {
shift = 8 * (where & 3);
......
......@@ -351,11 +351,9 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
slot->slot = NULL;
bridge->nr_slots--;
if (retval == -EBUSY)
pr_warn("Slot %llu already registered by another "
"hotplug driver\n", sun);
pr_warn("Slot %llu already registered by another hotplug driver\n", sun);
else
pr_warn("acpiphp_register_hotplug_slot failed "
"(err code = 0x%x)\n", retval);
pr_warn("acpiphp_register_hotplug_slot failed (err code = 0x%x)\n", retval);
}
/* Even if the slot registration fails, we can still use it. */
}
......
......@@ -706,8 +706,7 @@ static int ctrl_slot_setup(struct controller *ctrl,
hotplug_slot_info->adapter_status =
get_presence_status(ctrl, slot);
dbg("registering bus %d, dev %d, number %d, "
"ctrl->slot_device_offset %d, slot %d\n",
dbg("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n",
slot->bus, slot->device,
slot->number, ctrl->slot_device_offset,
slot_number);
......@@ -837,8 +836,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
bus = pdev->subordinate;
if (!bus) {
dev_notice(&pdev->dev, "the device is not a bridge, "
"skipping\n");
dev_notice(&pdev->dev, "the device is not a bridge, skipping\n");
rc = -ENODEV;
goto err_disable_device;
}
......
......@@ -1045,8 +1045,7 @@ static int enable_slot(struct hotplug_slot *hs)
rc = check_limitations(slot_cur);
if (rc) {
err("Adding this card exceeds the limitations of this bus.\n");
err("(i.e., >1 133MHz cards running on same bus, or "
">2 66 PCI cards running on same bus.\n");
err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n");
err("Try hot-adding into another bus\n");
rc = -EINVAL;
goto error_nopower;
......@@ -1070,12 +1069,10 @@ static int enable_slot(struct hotplug_slot *hs)
!(SLOT_PWRGD(slot_cur->status)))
err("power fault occurred trying to power up\n");
else if (SLOT_BUS_SPEED(slot_cur->status)) {
err("bus speed mismatch occurred. please check "
"current bus speed and card capability\n");
err("bus speed mismatch occurred. please check current bus speed and card capability\n");
print_card_capability(slot_cur);
} else if (SLOT_BUS_MODE(slot_cur->ext_status)) {
err("bus mode mismatch occurred. please check "
"current bus mode and card capability\n");
err("bus mode mismatch occurred. please check current bus mode and card capability\n");
print_card_capability(slot_cur);
}
ibmphp_update_slot_info(slot_cur);
......@@ -1098,8 +1095,7 @@ static int enable_slot(struct hotplug_slot *hs)
goto error_power;
}
if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) {
err("bus speed mismatch occurred. please check current bus "
"speed and card capability\n");
err("bus speed mismatch occurred. please check current bus speed and card capability\n");
print_card_capability(slot_cur);
goto error_power;
}
......
......@@ -137,8 +137,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno)
"Please choose another device.\n", cur_func->device);
return -ENODEV;
} else if (class == PCI_CLASS_DISPLAY_VGA) {
err ("The device %x is not supported for hot plugging. "
"Please choose another device.\n", cur_func->device);
err ("The device %x is not supported for hot plugging. Please choose another device.\n",
cur_func->device);
return -ENODEV;
}
switch (hdr_type) {
......@@ -179,8 +179,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno)
case PCI_HEADER_TYPE_MULTIBRIDGE:
class >>= 8;
if (class != PCI_CLASS_BRIDGE_PCI) {
err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. "
"Please insert another card.\n", cur_func->device);
err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n",
cur_func->device);
return -ENODEV;
}
assign_alt_irq (cur_func, class_code);
......@@ -247,8 +247,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno)
class >>= 8;
debug ("class now is %x\n", class);
if (class != PCI_CLASS_BRIDGE_PCI) {
err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. "
"Please insert another card.\n", cur_func->device);
err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n",
cur_func->device);
return -ENODEV;
}
......@@ -1125,13 +1125,11 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno)
class >>= 8; /* to take revision out, class = class.subclass.prog i/f */
if (class == PCI_CLASS_NOT_DEFINED_VGA) {
err ("The device %x is VGA compatible and as is not supported for hot plugging. "
"Please choose another device.\n", device);
err ("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device);
amount->not_correct = 1;
return amount;
} else if (class == PCI_CLASS_DISPLAY_VGA) {
err ("The device %x is not supported for hot plugging. "
"Please choose another device.\n", device);
err ("The device %x is not supported for hot plugging. Please choose another device.\n", device);
amount->not_correct = 1;
return amount;
}
......@@ -1483,12 +1481,10 @@ static int unconfigure_boot_card (struct slot *slot_cur)
debug ("hdr_type %x, class %x\n", hdr_type, class);
class >>= 8; /* to take revision out, class = class.subclass.prog i/f */
if (class == PCI_CLASS_NOT_DEFINED_VGA) {
err ("The device %x function %x is VGA compatible and is not supported for hot removing. "
"Please choose another device.\n", device, function);
err ("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function);
return -ENODEV;
} else if (class == PCI_CLASS_DISPLAY_VGA) {
err ("The device %x function %x is not supported for hot removing. "
"Please choose another device.\n", device, function);
err ("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function);
return -ENODEV;
}
......@@ -1513,9 +1509,7 @@ static int unconfigure_boot_card (struct slot *slot_cur)
case PCI_HEADER_TYPE_BRIDGE:
class >>= 8;
if (class != PCI_CLASS_BRIDGE_PCI) {
err ("This device %x function %x is not PCI-to-PCI bridge, "
"and is not supported for hot-removing. "
"Please try another card.\n", device, function);
err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function);
return -ENODEV;
}
rc = unconfigure_boot_bridge (busno, device, function);
......@@ -1529,9 +1523,7 @@ static int unconfigure_boot_card (struct slot *slot_cur)
case PCI_HEADER_TYPE_MULTIBRIDGE:
class >>= 8;
if (class != PCI_CLASS_BRIDGE_PCI) {
err ("This device %x function %x is not PCI-to-PCI bridge, "
"and is not supported for hot-removing. "
"Please try another card.\n", device, function);
err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function);
return -ENODEV;
}
rc = unconfigure_boot_bridge (busno, device, function);
......
......@@ -789,8 +789,7 @@ int ibmphp_remove_resource (struct resource_node *res)
bus_cur = find_bus_wprev (res->busno, NULL, 0);
if (!bus_cur) {
err ("cannot find corresponding bus of the io resource to remove "
"bailing out...\n");
err ("cannot find corresponding bus of the io resource to remove bailing out...\n");
return -ENODEV;
}
......
......@@ -432,8 +432,7 @@ int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus,
if ((slot->info == NULL) || (slot->ops == NULL))
return -EINVAL;
if (slot->release == NULL) {
dbg("Why are you trying to register a hotplug slot "
"without a proper release function?\n");
dbg("Why are you trying to register a hotplug slot without a proper release function?\n");
return -EINVAL;
}
......
......@@ -266,8 +266,7 @@ static int pciehp_probe(struct pcie_device *dev)
rc = init_slot(ctrl);
if (rc) {
if (rc == -EBUSY)
ctrl_warn(ctrl, "Slot already registered by another "
"hotplug driver\n");
ctrl_warn(ctrl, "Slot already registered by another hotplug driver\n");
else
ctrl_err(ctrl, "Slot initialization failed\n");
goto err_out_release_ctlr;
......
......@@ -376,14 +376,12 @@ static void handle_button_press_event(struct slot *p_slot)
pciehp_get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl,
"PCI slot #%s - powering off due to button "
"press.\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n",
slot_name(p_slot));
} else {
p_slot->state = BLINKINGON_STATE;
ctrl_info(ctrl,
"PCI slot #%s - powering on due to button "
"press.\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n",
slot_name(p_slot));
}
/* blink green LED and turn off amber */
pciehp_green_led_blink(p_slot);
......@@ -404,8 +402,8 @@ static void handle_button_press_event(struct slot *p_slot)
else
pciehp_green_led_off(p_slot);
pciehp_set_attention_status(p_slot, 0);
ctrl_info(ctrl, "PCI slot #%s - action canceled "
"due to button press\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n",
slot_name(p_slot));
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
......
......@@ -174,12 +174,10 @@ static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
* event even though it supports none of power
* controller, attention led, power led and EMI.
*/
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to "
"wait for command completed event.\n");
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to wait for command completed event\n");
ctrl->no_cmd_complete = 0;
} else {
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe "
"the controller is broken.\n");
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe the controller is broken\n");
}
}
......
......@@ -46,9 +46,8 @@ int pciehp_configure_device(struct slot *p_slot)
dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
"at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
pci_domain_nr(parent), parent->number);
ctrl_err(ctrl, "Device %s already exists at %04x:%02x:00, cannot hot-add\n",
pci_name(dev), pci_domain_nr(parent), parent->number);
pci_dev_put(dev);
ret = -EEXIST;
goto out;
......
......@@ -250,15 +250,13 @@ static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
}
if (rc == PCI_L1_ERR) {
dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message: %s",
dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message: %s",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (rc) {
dev_dbg(&slot->pci_bus->self->dev,
"insert failed with error %d sub-error %d\n",
dev_dbg(&slot->pci_bus->self->dev, "insert failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
}
......@@ -288,21 +286,18 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
dev_dbg(&slot->pci_bus->self->dev,
"Cannot remove last 33MHz card\n");
dev_dbg(&slot->pci_bus->self->dev, "Cannot remove last 33MHz card\n");
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message \n%s\n",
dev_dbg(&slot->pci_bus->self->dev, "L1 failure %d with message \n%s\n",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
dev_dbg(&slot->pci_bus->self->dev,
"remove failed with error %d sub-error %d\n",
dev_dbg(&slot->pci_bus->self->dev, "remove failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
}
......@@ -417,8 +412,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
if (acpi_bus_get_device(phandle, &pdevice)) {
dev_dbg(&slot->pci_bus->self->dev,
"no parent device, assuming NULL\n");
dev_dbg(&slot->pci_bus->self->dev, "no parent device, assuming NULL\n");
pdevice = NULL;
}
......@@ -447,10 +441,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
ret = acpi_bus_scan(chandle);
if (ACPI_FAILURE(ret)) {
printk(KERN_ERR "%s: acpi_bus_scan "
"failed (0x%x) for slot %d "
"func %d\n", __func__,
ret, (int)(adr>>16),
printk(KERN_ERR "%s: acpi_bus_scan failed (0x%x) for slot %d func %d\n",
__func__, ret, (int)(adr>>16),
(int)(adr&0xffff));
/* try to continue on */
}
......@@ -471,11 +463,9 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
mutex_unlock(&sn_hotplug_mutex);
if (rc == 0)
dev_dbg(&slot->pci_bus->self->dev,
"insert operation successful\n");
dev_dbg(&slot->pci_bus->self->dev, "insert operation successful\n");
else
dev_dbg(&slot->pci_bus->self->dev,
"insert operation failed rc = %d\n", rc);
dev_dbg(&slot->pci_bus->self->dev, "insert operation failed rc = %d\n", rc);
return rc;
}
......@@ -561,8 +551,7 @@ static int disable_slot(struct hotplug_slot *bss_hotplug_slot)
acpi_status ret;
ret = acpi_unload_table_id(ssdt_id);
if (ACPI_FAILURE(ret)) {
printk(KERN_ERR "%s: acpi_unload_table_id "
"failed (0x%x) for id %d\n",
printk(KERN_ERR "%s: acpi_unload_table_id failed (0x%x) for id %d\n",
__func__, ret, ssdt_id);
/* try to continue on */
}
......
......@@ -143,8 +143,7 @@ static int init_slots(struct controller *ctrl)
snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
hotplug_slot->ops = &shpchp_hotplug_slot_ops;
ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
"hp_slot=%x sun=%x slot_device_offset=%x\n",
ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x hp_slot=%x sun=%x slot_device_offset=%x\n",
pci_domain_nr(ctrl->pci_dev->subordinate),
slot->bus, slot->device, slot->hp_slot, slot->number,
ctrl->slot_device_offset);
......
......@@ -196,8 +196,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
ctrl_dbg(ctrl, "Change speed to %d\n", speed);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
ctrl_err(ctrl, "%s: Issue of set bus speed mode command "
"failed\n", __func__);
ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
__func__);
return WRONG_BUS_FREQUENCY;
}
return rc;
......@@ -215,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
*/
if (flag) {
if (asp < bsp) {
ctrl_err(ctrl, "Speed of bus %x and adapter %x "
"mismatch\n", bsp, asp);
ctrl_err(ctrl, "Speed of bus %x and adapter %x mismatch\n",
bsp, asp);
rc = WRONG_BUS_FREQUENCY;
}
return rc;
......@@ -250,8 +250,7 @@ static int board_added(struct slot *p_slot)
hp_slot = p_slot->device - ctrl->slot_device_offset;
ctrl_dbg(ctrl,
"%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
ctrl_dbg(ctrl, "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
__func__, p_slot->device, ctrl->slot_device_offset, hp_slot);
/* Power on slot without connecting to bus */
......@@ -263,8 +262,8 @@ static int board_added(struct slot *p_slot)
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
ctrl_err(ctrl, "%s: Issue of set bus speed mode command"
" failed\n", __func__);
ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
__func__);
return WRONG_BUS_FREQUENCY;
}
......@@ -277,8 +276,7 @@ static int board_added(struct slot *p_slot)
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
ctrl_err(ctrl, "Can't get adapter speed or "
"bus mode mismatch\n");
ctrl_err(ctrl, "Can't get adapter speed or bus mode mismatch\n");
return WRONG_BUS_FREQUENCY;
}
......@@ -289,8 +287,8 @@ static int board_added(struct slot *p_slot)
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
slots_not_empty = 1;
ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d,"
" max_bus_speed %d\n", __func__, slots_not_empty, asp,
ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
__func__, slots_not_empty, asp,
bsp, msp);
rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
......@@ -490,12 +488,12 @@ static void handle_button_press_event(struct slot *p_slot)
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl, "PCI slot #%s - powering off due to "
"button press.\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n",
slot_name(p_slot));
} else {
p_slot->state = BLINKINGON_STATE;
ctrl_info(ctrl, "PCI slot #%s - powering on due to "
"button press.\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n",
slot_name(p_slot));
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
......@@ -518,8 +516,8 @@ static void handle_button_press_event(struct slot *p_slot)
else
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
ctrl_info(ctrl, "PCI slot #%s - action canceled due to "
"button press\n", slot_name(p_slot));
ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n",
slot_name(p_slot));
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
......
......@@ -341,8 +341,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
cmd_status = hpc_check_cmd_status(slot->ctrl);
if (cmd_status) {
ctrl_err(ctrl,
"Failed to issued command 0x%x (error code = %d)\n",
ctrl_err(ctrl, "Failed to issued command 0x%x (error code = %d)\n",
cmd, cmd_status);
retval = -EIO;
}
......@@ -974,8 +973,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
for (i = 0; i < 9 + num_slots; i++) {
rc = shpc_indirect_read(ctrl, i, &tempdword);
if (rc) {
ctrl_err(ctrl,
"Cannot read creg (index = %d)\n", i);
ctrl_err(ctrl, "Cannot read creg (index = %d)\n",
i);
goto abort;
}
ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword);
......@@ -1060,10 +1059,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
/* Installs the interrupt handler */
rc = pci_enable_msi(pdev);
if (rc) {
ctrl_info(ctrl,
"Can't get msi for the hotplug controller\n");
ctrl_info(ctrl,
"Use INTx for the hotplug controller\n");
ctrl_info(ctrl, "Can't get msi for the hotplug controller\n");
ctrl_info(ctrl, "Use INTx for the hotplug controller\n");
}
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
......@@ -1071,8 +1068,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
ctrl_dbg(ctrl, "request_irq %d (returns %d)\n",
ctrl->pci_dev->irq, rc);
if (rc) {
ctrl_err(ctrl, "Can't get irq %d for the hotplug "
"controller\n", ctrl->pci_dev->irq);
ctrl_err(ctrl, "Can't get irq %d for the hotplug controller\n",
ctrl->pci_dev->irq);
goto abort_iounmap;
}
}
......
......@@ -46,9 +46,9 @@ int shpchp_configure_device(struct slot *p_slot)
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
"at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
pci_domain_nr(parent), p_slot->bus, p_slot->device);
ctrl_err(ctrl, "Device %s already exists at %04x:%02x:%02x, cannot hot-add\n",
pci_name(dev), pci_domain_nr(parent),
p_slot->bus, p_slot->device);
pci_dev_put(dev);
ret = -EINVAL;
goto out;
......
......@@ -980,8 +980,7 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
/* Check whether driver already requested for MSI irq */
if (dev->msi_enabled) {
dev_info(&dev->dev, "can't enable MSI-X "
"(MSI IRQ already assigned)\n");
dev_info(&dev->dev, "can't enable MSI-X (MSI IRQ already assigned)\n");
return -EINVAL;
}
status = msix_capability_init(dev, entries, nvec);
......
......@@ -286,8 +286,8 @@ static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr,
!!val) {
pdev->subordinate->bus_flags ^= PCI_BUS_FLAGS_NO_MSI;
dev_warn(&pdev->dev, "forced subordinate bus to%s support MSI,"
" bad things could happen\n", val ? "" : " not");
dev_warn(&pdev->dev, "forced subordinate bus to%s support MSI, bad things could happen\n",
val ? "" : " not");
}
return count;
......@@ -945,8 +945,7 @@ legacy_io_err:
kfree(b->legacy_io);
b->legacy_io = NULL;
kzalloc_err:
printk(KERN_WARNING "pci: warning: could not create legacy I/O port "
"and ISA memory resources to sysfs\n");
printk(KERN_WARNING "pci: warning: could not create legacy I/O port and ISA memory resources to sysfs\n");
return;
}
......@@ -1006,8 +1005,7 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
return -ENODEV;
if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
WARN(1, "process \"%s\" tried to map 0x%08lx bytes at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
pci_name(pdev), i,
(u64)pci_resource_start(pdev, i),
......
......@@ -555,8 +555,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
*/
if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
dev_err(&dev->dev, "invalid power transition "
"(from state %d to %d)\n", dev->current_state, state);
dev_err(&dev->dev, "invalid power transition (from state %d to %d)\n",
dev->current_state, state);
return -EINVAL;
}
......@@ -603,8 +603,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
if (dev->current_state != state && printk_ratelimit())
dev_info(&dev->dev, "Refused to change power state, "
"currently in D%d\n", dev->current_state);
dev_info(&dev->dev, "Refused to change power state, currently in D%d\n",
dev->current_state);
/*
* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
......@@ -1029,8 +1029,8 @@ static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
return;
for (;;) {
dev_dbg(&pdev->dev, "restoring config space at offset "
"%#x (was %#x, writing %#x)\n", offset, val, saved_val);
dev_dbg(&pdev->dev, "restoring config space at offset %#x (was %#x, writing %#x)\n",
offset, val, saved_val);
pci_write_config_dword(pdev, offset, saved_val);
if (retry-- <= 0)
return;
......@@ -2815,8 +2815,8 @@ int pci_set_cacheline_size(struct pci_dev *dev)
if (cacheline_size == pci_cache_line_size)
return 0;
dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
"supported\n", pci_cache_line_size << 2);
dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not supported\n",
pci_cache_line_size << 2);
return -EINVAL;
}
......@@ -2952,8 +2952,8 @@ bool pci_intx_mask_supported(struct pci_dev *dev)
* go ahead and check it.
*/
if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
dev_err(&dev->dev, "Command register changed from "
"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
dev_err(&dev->dev, "Command register changed from 0x%x to 0x%x: driver or hardware bug?\n",
orig, new);
} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
mask_supported = true;
pci_write_config_word(dev, PCI_COMMAND, orig);
......@@ -3138,8 +3138,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
if (pci_wait_for_pending(dev, PCI_AF_STATUS, PCI_AF_STATUS_TP))
goto clear;
dev_err(&dev->dev, "transaction is not cleared; "
"proceeding with reset anyway\n");
dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
clear:
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
......
......@@ -397,16 +397,14 @@ static int aer_inject(struct aer_error_inj *einj)
if (!aer_mask_override && einj->cor_status &&
!(einj->cor_status & ~cor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The correctable error(s) is masked "
"by device\n");
printk(KERN_WARNING "The correctable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
if (!aer_mask_override && einj->uncor_status &&
!(einj->uncor_status & ~uncor_mask)) {
ret = -EINVAL;
printk(KERN_WARNING "The uncorrectable error(s) is masked "
"by device\n");
printk(KERN_WARNING "The uncorrectable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
......
......@@ -172,9 +172,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
int id = ((dev->bus->number << 8) | dev->devfn);
if (!info->status) {
dev_err(&dev->dev,
"PCIe Bus Error: severity=%s, type=Unaccessible, "
"id=%04x(Unregistered Agent ID)\n",
dev_err(&dev->dev, "PCIe Bus Error: severity=%s, type=Unaccessible, id=%04x(Unregistered Agent ID)\n",
aer_error_severity_string[info->severity], id);
goto out;
}
......@@ -182,13 +180,11 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
layer = AER_GET_LAYER_ERROR(info->severity, info->status);
agent = AER_GET_AGENT(info->severity, info->status);
dev_err(&dev->dev,
"PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
dev_err(&dev->dev, "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n",
aer_error_severity_string[info->severity],
aer_error_layer[layer], id, aer_agent_string[agent]);
dev_err(&dev->dev,
" device [%04x:%04x] error status/mask=%08x/%08x\n",
dev_err(&dev->dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
dev->vendor, dev->device,
info->status, info->mask);
......
......@@ -199,8 +199,7 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
* assuming that the PME was reported by a PCIe-PCI bridge that
* used devfn different from zero.
*/
dev_dbg(&port->dev, "PME interrupt generated for "
"non-existent device %02x:%02x.%d\n",
dev_dbg(&port->dev, "PME interrupt generated for non-existent device %02x:%02x.%d\n",
busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
found = pcie_pme_from_pci_bridge(bus, 0);
}
......
......@@ -204,8 +204,8 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
return -ENODEV;
if (!dev->irq && dev->pin) {
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; check vendor BIOS\n",
dev->vendor, dev->device);
}
status = pcie_port_device_register(dev);
if (status)
......@@ -397,7 +397,7 @@ static struct pci_driver pcie_portdriver = {
static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
{
pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
d->ident);
d->ident);
pcie_pme_disable_msi();