Commit 1459c837 authored by Soren Brinkmann's avatar Soren Brinkmann Committed by Mike Turquette

clk: si570: Add a driver for SI570 oscillators

Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
The devices generate low-jitter clock signals and are reprogrammable via
an I2C interface.
Reviewed-by: default avatarGuenter Roeck <>
Signed-off-by: default avatarSoren Brinkmann <>
Signed-off-by: default avatarMike Turquette <>
parent 3a5aec24
Binding for Silicon Labs 570, 571, 598 and 599 programmable
I2C clock generators.
This binding uses the common clock binding[1]. Details about the devices can be
found in the data sheets[2][3].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Si570/571 Data Sheet
[3] Si598/599 Data Sheet
Required properties:
- compatible: Shall be one of "silabs,si570", "silabs,si571",
"silabs,si598", "silabs,si599"
- reg: I2C device address.
- #clock-cells: From common clock bindings: Shall be 0.
- factory-fout: Factory set default frequency. This frequency is part specific.
The correct frequency for the part used has to be provided in
order to generate the correct output frequencies. For more
details, please refer to the data sheet.
- temperature-stability: Temperature stability of the device in PPM. Should be
one of: 7, 20, 50 or 100.
Optional properties:
- clock-output-names: From common clock bindings. Recommended to be "si570".
- clock-frequency: Output frequency to generate. This defines the output
frequency set during boot. It can be reprogrammed during
runtime through the common clock framework.
si570: clock-generator@5d {
#clock-cells = <0>;
compatible = "silabs,si570";
temperature-stability = <50>;
reg = <0x5d>;
factory-fout = <156250000>;
......@@ -64,6 +64,16 @@ config COMMON_CLK_SI5351
This driver supports Silicon Labs 5351A/B/C programmable clock
config COMMON_CLK_SI570
tristate "Clock driver for SiLabs 570 and compatible devices"
depends on I2C
depends on OF
select REGMAP_I2C
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
tristate "Clock driver for S2MPS11 MFD"
depends on MFD_SEC_CORE
......@@ -45,6 +45,7 @@ obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment