1. 28 Feb, 2015 1 commit
    • Arnd Bergmann's avatar
      net: smc91x: use run-time configuration on all ARM machines · b70661c7
      Arnd Bergmann authored
      
      
      The smc91x driver traditionally gets configured at compile-time
      for whichever hardware it runs on. This no longer works on
      ARM as we continue to move to building all-in-one kernels.
      
      Most ARM configurations with this driver already use run-time
      configuration through DT or through platform_data, but a
      few have not been converted yet.
      
      I've checked all ARM boards that use this driver in their
      legacy board files, and converted the ones that were using
      compile-time configuration in smc91x.h to behave like the
      other ones and provide the interrupt polarity along with
      the MMIO configuration (width, stride) at platform device
      creation time.
      
      In particular, these combinations were previously selectable
      in Kconfig but in fact broken:
      
      - sa1100 assabet plus pleb
      - msm combined with any other armv6/v7 platform
      - pxa-idp combined with any non-DMA pxa variant
      - LogicPD PXA270 combined with any other pxa
      - nomadik combined with any other armv4/v5 platform,
        e.g. versatile.
      
      None of these seem critical enough to warrant a backport
      to stable, but it would be nice to clean this up for good.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ----
      I would like the patch to get merged through netdev, after
      Robert and/or Linus have verified it on at least some hardware.
      
      There are a few other non-ARM platforms using this driver,
      I could do the same patch for those if we want to take
      it further.
      
       arch/arm/mach-msm/board-halibut.c    |   8 ++++-
       arch/arm/mach-msm/board-qsd8x50.c    |   8 ++++-
       arch/arm/mach-pxa/idp.c              |   5 +++
       arch/arm/mach-pxa/lpd270.c           |   8 ++++-
       arch/arm/mach-realview/core.c        |   7 ++++
       arch/arm/mach-realview/realview_eb.c |   2 +-
       arch/arm/mach-sa1100/neponset.c      |   6 ++++
       arch/arm/mach-sa1100/pleb.c          |   7 ++++
       drivers/net/ethernet/smsc/smc91x.c   |   9 +++--
       drivers/net/ethernet/smsc/smc91x.h   | 114 ++----------------------------------------------------------
       10 files changed, 57 insertions(+), 117 deletions(-)
      Tested-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b70661c7
  2. 24 Dec, 2012 1 commit
  3. 14 Sep, 2012 1 commit
  4. 31 Jul, 2012 1 commit
  5. 25 Jan, 2012 1 commit
  6. 05 Jan, 2012 1 commit
  7. 14 Nov, 2011 1 commit
  8. 12 Jul, 2011 1 commit
  9. 16 Mar, 2011 1 commit
  10. 15 Dec, 2010 1 commit
  11. 19 Oct, 2010 1 commit
    • Nicolas Pitre's avatar
      arm: remove machine_desc.io_pg_offst and .phys_io · 6451d778
      Nicolas Pitre authored
      
      
      Since we're now using addruart to establish the debug mapping, we can
      remove the io_pg_offst and phys_io members of struct machine_desc.
      
      The various declarations were removed using the following script:
      
        grep -rl MACHINE_START arch/arm | xargs \
        sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'
      
      [ Initial patch was from Jeremy Kerr, example script from Russell King ]
      Signed-off-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
      Acked-by: Eric Miao <eric.miao at canonical.com>
      6451d778
  12. 01 Mar, 2010 1 commit
  13. 30 Nov, 2009 1 commit
  14. 10 Sep, 2009 1 commit
  15. 09 Mar, 2009 1 commit
    • Eric Miao's avatar
      [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage · 51c62982
      Eric Miao authored
      
      
      Considering the header mess ATM, it is not always possible to include
      the correct header files within board code. Let's keep this simple:
      
        <mach/pxa25x.h>  - for pxa25x based platforms
        <mach/pxa27x.h>  - for pxa27x based platforms
        <mach/pxa300.h>  - for pxa300 based platforms
        <mach/pxa320.h>  - for pxa320 based platforms
        <mach/pxa930.h>  - for pxa930 based platforms
      
      NOTE:
      
      1. one header one board file, they are not compatible (i.e. they have
         conflicting definitions which won't compile if included together).
      
      2. Unless strictly necessary, the following header files are considered
         to be SoC files use _only_, and is not recommended to be included in
         board code:
      
          <mach/hardware.h>
          <mach/pxa-regs.h>
          <mach/pxa2xx-regs.h>
          <mach/pxa3xx-regs.h>
          <mach/mfp.h>
          <mach/mfp-pxa2xx.h>
          <mach/mfp-pxa25x.h>
          <mach/mfp-pxa27x.h>
          <mach/mfp-pxa3xx.h>
          <mach/mfp-pxa300.h>
          <mach/mfp-pxa320.h>
          <mach/mfp-pxa930.h>
      Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
      51c62982
  16. 26 Sep, 2008 3 commits
  17. 07 Aug, 2008 2 commits
  18. 19 Apr, 2008 1 commit
  19. 28 Jan, 2008 1 commit
    • Russell King's avatar
      [NET] smc91x: Make smc91x use IRQ resource trigger flags · e7b3dc7e
      Russell King authored
      
      
      smc91x is shared between many different platforms.  Each platform needs
      to specify the interrupt type, and in some cases the irq type depends
      on more than just the build configuration - it depends on runtime
      checks.
      
      Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
      a way for these flags to be passed via the IRQ resource itself.
      
      Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
      with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
      the low bits of PCI iomem resources correspond with the BAR flag bits.
      
      Also provide a way to configure smc91x to read the IRQ flags from the
      resource.  Once all platforms have been converted over (signified
      by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
      be removed.
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Acked-by: default avatarNicolas Pitre <nico@cam.org>
      Acked-by: default avatarJeff Garzik <jgarzik@redhat.com>
      e7b3dc7e
  20. 12 Jul, 2007 2 commits
  21. 09 Oct, 2006 1 commit
    • David Howells's avatar
      IRQ: Use the new typedef for interrupt handler function pointers · 40220c1a
      David Howells authored
      
      
      Use the new typedef for interrupt handler function pointers rather than
      actually spelling out the full thing each time.  This was scripted with the
      following small shell script:
      
      #!/bin/sh
      egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
      while read i
      do
          echo $i
          perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
      done
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      40220c1a
  22. 06 Oct, 2006 1 commit
  23. 02 Oct, 2006 1 commit
  24. 01 Jul, 2006 1 commit
  25. 13 Jan, 2006 1 commit
  26. 29 Oct, 2005 1 commit
  27. 28 Oct, 2005 1 commit
  28. 04 Jul, 2005 1 commit
  29. 03 Jul, 2005 1 commit
  30. 16 Apr, 2005 1 commit
    • Linus Torvalds's avatar
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds authored
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4