1. 09 May, 2007 1 commit
  2. 25 Apr, 2007 2 commits
  3. 23 Feb, 2007 1 commit
  4. 16 Feb, 2007 1 commit
  5. 14 Feb, 2007 1 commit
    • Tim Schmielau's avatar
      [PATCH] remove many unneeded #includes of sched.h · cd354f1a
      Tim Schmielau authored
      
      
      After Al Viro (finally) succeeded in removing the sched.h #include in module.h
      recently, it makes sense again to remove other superfluous sched.h includes.
      There are quite a lot of files which include it but don't actually need
      anything defined in there.  Presumably these includes were once needed for
      macros that used to live in sched.h, but moved to other header files in the
      course of cleaning it up.
      
      To ease the pain, this time I did not fiddle with any header files and only
      removed #includes from .c-files, which tend to cause less trouble.
      
      Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
      arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
      allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
      configs in arch/arm/configs on arm.  I also checked that no new warnings were
      introduced by the patch (actually, some warnings are removed that were emitted
      by unnecessarily included header files).
      Signed-off-by: default avatarTim Schmielau <tim@physik3.uni-rostock.de>
      Acked-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cd354f1a
  6. 05 Feb, 2007 1 commit
  7. 22 Jan, 2007 1 commit
    • Andres Salomon's avatar
      USB: asix: Detect internal PHY and enable/use accordingly · d0ffff8f
      Andres Salomon authored
      
      
      Different AX88772 dongles use different PHYs; the chip is capable of using
      both a primary and secondary PHY, and supports an internal and external PHY.
      
      It appears that some DUB-E100 devices use the internal PHY, so trying to use
      an external one will not work (note that this is different across revisions,
      as well; the "A" and "B" revs of the DUB-E100 use different PHYs!).  The data
      sheet for the AX88772 chip specifies that the internal PHY id will be 0x10,
      so if that's read from the EEPROM, we should use that rather than attempting
      to use an external PHY.
      
      Thanks to Mitch Bradley for pointing this out!
      Signed-off-by: default avatarAndres Salomon <dilinger@debian.org>
      Cc: David Hollis <dhollis@davehollis.com>
      Cc: Chris Ball <cjb@laptop.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      d0ffff8f
  8. 05 Jan, 2007 1 commit
  9. 01 Dec, 2006 1 commit
  10. 17 Oct, 2006 2 commits
  11. 05 Oct, 2006 1 commit
    • David Howells's avatar
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      David Howells authored
      
      
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
      of passing regs around manually through all ~1800 interrupt handlers in the
      Linux kernel.
      
      The regs pointer is used in few places, but it potentially costs both stack
      space and code to pass it around.  On the FRV arch, removing the regs parameter
      from all the genirq function results in a 20% speed up of the IRQ exit path
      (ie: from leaving timer_interrupt() to leaving do_IRQ()).
      
      Where appropriate, an arch may override the generic storage facility and do
      something different with the variable.  On FRV, for instance, the address is
      maintained in GR28 at all times inside the kernel as part of general exception
      handling.
      
      Having looked over the code, it appears that the parameter may be handed down
      through up to twenty or so layers of functions.  Consider a USB character
      device attached to a USB hub, attached to a USB controller that posts its
      interrupts through a cascaded auxiliary interrupt controller.  A character
      device driver may want to pass regs to the sysrq handler through the input
      layer which adds another few layers of parameter passing.
      
      I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
      main part of the code on FRV and i386, though I can't test most of the drivers.
      I've also done partial conversion for powerpc and MIPS - these at least compile
      with minimal configurations.
      
      This will affect all archs.  Mostly the changes should be relatively easy.
      Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
      
      	struct pt_regs *old_regs = set_irq_regs(regs);
      
      And put the old one back at the end:
      
      	set_irq_regs(old_regs);
      
      Don't pass regs through to generic_handle_irq() or __do_IRQ().
      
      In timer_interrupt(), this sort of change will be necessary:
      
      	-	update_process_times(user_mode(regs));
      	-	profile_tick(CPU_PROFILING, regs);
      	+	update_process_times(user_mode(get_irq_regs()));
      	+	profile_tick(CPU_PROFILING);
      
      I'd like to move update_process_times()'s use of get_irq_regs() into itself,
      except that i386, alone of the archs, uses something other than user_mode().
      
      Some notes on the interrupt handling in the drivers:
      
       (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
           the input_dev struct.
      
       (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
           something different depending on whether it's been supplied with a regs
           pointer or not.
      
       (*) Various IRQ handler function pointers have been moved to type
           irq_handler_t.
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  12. 28 Sep, 2006 1 commit
  13. 27 Sep, 2006 1 commit
  14. 30 Jun, 2006 1 commit
  15. 21 Jun, 2006 1 commit
  16. 14 Apr, 2006 1 commit
  17. 31 Jan, 2006 1 commit
  18. 04 Jan, 2006 2 commits
  19. 17 Nov, 2005 1 commit
  20. 28 Oct, 2005 1 commit
  21. 08 Sep, 2005 1 commit
    • David Brownell's avatar
      [PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters · 2e55cc72
      David Brownell authored
      
      
      This patch moves the ASIX AX8817x driver into its own file, just using
      the "usbnet" infrastructure as a utility library.
      
       - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks,
         moving code from one file to another, and exporting a few functions.
      
       - This includes updates from Jamie Painter to add (and use) a new hook
         to handle the different maximum transfer sizes for rx and tx sides.
      
       - Also from Jamie, some bugfixes:
          * MDIO byteorder (to address some PPC media negotiation problems);
          * Force alignment at key spots when using ax88772 framing (on some
            embedded hardware, the network stack will break otherwise);
          * Address some link reset problems.
      
      It also makes this driver use the standard (5 seconds vs half second)
      control timeouts used elsewhere in USB; and wraps a few lines before
      the 80th column (which previously needed it).
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      2e55cc72